368 TECHNICAL INFORMATION Table 35. Reference Transmission Capacity of L Ps -Nominal Width of Belts 100 (25.4mm)- (kW) No. of Teeth of Small Pulley 12 14 15 16 18 19 20 21 22 24 25 26 28 30 32 36 40 48 Rotary Speed of Small Pulley(rpm) Diameter of the Pitch Circle(mm) 36.38 42.45 45.48 48.51 54.57 57.61 60.64 63.67 66.70 72.77 75.80 78.83 84.89 90.96 97.02 109.15 121.28 145.53 725 0.33 0.39 0.42 0.44 0.50 0.53 0.56 0.58 0.61 0.67 0.70 0.72 0.78 0.83 0.89 1.00 1.11 1.33 870 0.40 0.47 0.50 0.53 0.60 0.63 0.67 0.70 0.73 0.80 0.83 0.87 0.93 1.00 1.07 1.20 1.33 1.59 950 0.44 0.51 0.55 0.58 0.66 0.69 0.73 0.77 0.80 0.87 0.91 0.95 1.02 1.09 1.16 1.31 1.45 1.73 1160 0.53 0.62 0.67 0.71 0.80 0.85 0.89 0.93 0.98 1.07 1.11 1.15 1.24 1.33 1.41 1.59 1.76 2.09 1425 0.77 0.82 0.87 0.98 1.04 1.09 1.14 1.20 1.31 1.36 1.41 1.52 1.62 1.73 1.93 2.13 2.52 1750 0.94 1.01 1.07 1.20 1.27 1.34 1.40 1.47 1.59 1.66 1.72 1.85 1.97 2.10 2.34 2.58 3.02 2850 1.73 1.93 2.03 2.13 2.23 2.33 2.52 2.62 2.71 2.89 3.07 3.24 3.56 3.84 4.31 3450 2.07 2.31 2.43 2.54 2.66 2.77 2.99 3.09 3.19 3.39 3.58 3.76 4.07 4.33 4.67 100 0.04 0.05 0.05 0.06 0.06 0.07 0.07 0.08 0.08 0.09 0.09 0.10 0.10 0.11 0.12 0.13 0.15 0.18 200 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.23 0.24 0.27 0.30 0.37 300 0.13 0.16 0.17 0.18 0.20 0.22 0.23 0.24 0.25 0.27 0.29 0.30 0.32 0.34 0.37 0.41 0.46 0.55 400 0.18 0.21 0.23 0.24 0.27 0.29 0.30 0.32 0.34 0.37 0.38 0.40 0.43 0.46 0.49 0.55 0.61 0.74 500 0.23 0.27 0.29 0.30 0.34 0.36 0.38 0.40 0.42 0.46 0.48 0.50 0.54 0.58 0.61 0.69 0.77 0.92 600 0.27 0.32 0.34 0.37 0.41 0.44 0.46 0.48 0.51 0.55 0.58 0.60 0.64 0.69 0.74 0.83 0.92 1.10 700 0.32 0.37 0.40 0.43 0.48 0.51 0.54 0.56 0.59 0.64 0.67 0.70 0.75 0.81 0.86 0.97 1.07 1.28 800 0.37 0.43 0.46 0.49 0.55 0.58 0.61 0.64 0.68 0.74 0.77 0.80 0.86 0.92 0.98 1.10 1.22 1.46 900 0.41 0.48 0.52 0.55 0.62 0.66 0.69 0.73 0.76 0.83 0.86 0.90 0.97 1.03 1.10 1.24 1.37 1.64 1000 0.46 0.54 0.58 0.61 0.69 0.73 0.77 0.81 0.84 0.92 0.96 1.00 1.07 1.15 1.22 1.37 1.52 1.81 1100 0.51 0.59 0.63 0.68 0.76 0.80 0.84 0.89 0.93 1.01 1.05 1.09 1.18 1.26 1.34 1.51 1.67 1.99 1200 0.55 0.64 0.69 0.74 0.83 0.87 0.92 0.97 1.01 1.10 1.15 1.19 1.28 1.37 1.46 1.64 1.81 2.15 1300 0.70 0.75 0.80 0.90 0.95 1.00 1.05 1.09 1.19 1.24 1.29 1.39 1.48 1.58 1.77 1.96 2.32 1400 0.75 0.81 0.86 0.97 1.02 1.07 1.12 1.18 1.28 1.34 1.39 1.49 1.59 1.70 1.90 2.10 2.48 1500 0.81 0.86 0.92 1.03 1.09 1.15 1.20 1.26 1.37 1.43 1.48 1.59 1.70 1.81 2.03 2.24 2.64 1600 0.86 0.92 0.98 1.10 1.16 1.22 1.28 1.34 1.46 1.52 1.58 1.70 1.81 1.93 2.15 2.38 2.80 1700 0.91 0.98 1.04 1.17 1.23 1.30 1.36 1.42 1.55 1.61 1.68 1.80 1.92 2.04 2.28 2.51 2.95 1800 0.97 1.03 1.10 1.24 1.31 1.37 1.44 1.51 1.64 1.70 1.77 1.90 2.03 2.15 2.40 2.64 3.10 1900 1.16 1.31 1.38 1.45 1.52 1.59 1.73 1.80 1.86 2.00 2.13 2.27 2.52 2.77 3.24 2000 1.22 1.37 1.45 1.52 1.59 1.67 1.81 1.89 1.96 2.10 2.24 2.38 2.64 2.90 3.38 2200 1.34 1.51 1.59 1.67 1.75 1.83 1.99 2.06 2.14 2.29 2.44 2.59 2.87 3.14 3.64 2400 1.46 1.64 1.73 1.81 1.90 1.99 2.15 2.24 2.32 2.48 2.64 2.80 3.10 3.38 3.87 2500 1.52 1.70 1.80 1.89 1.97 2.06 2.24 2.32 2.41 2.58 2.74 2.90 3.20 3.49 3.98 2600 1.58 1.77 1.86 1.96 2.05 2.14 2.32 2.41 2.50 2.67 2.84 3.00 3.31 3.59 4.09 2800 1.70 1.90 2.00 2.10 2.20 2.29 2.48 2.58 2.67 2.85 3.02 3.19 3.51 3.80 4.27 3000 1.81 2.03 2.13 2.24 2.34 2.44 2.64 2.74 2.84 3.02 3.20 3.38 3.70 3.98 4.43 3200 1.93 2.15 2.27 2.38 2.48 2.59 2.80 2.90 3.00 3.19 3.38 3.55 3.87 4.15 4.56 3400 2.04 2.28 2.40 2.51 2.62 2.73 2.95 3.05 3.16 3.35 3.54 3.72 4.04 4.30 4.65 3600 2.15 2.40 2.52 2.64 2.76 2.87 3.10 3.20 3.31 3.51 3.70 3.87 4.18 4.43 4.71 3800 2.52 2.65 2.77 2.89 3.01 3.24 3.35 3.45 3.66 3.84 4.02 4.31 4.54 4.73 4000 2.64 2.77 2.90 3.02 3.14 3.38 3.49 3.59 3.80 3.98 4.15 4.43 4.62 4.72 4200 2.76 2.89 3.02 3.15 3.27 3.51 3.62 3.73 3.93 4.11 4.27 4.53 4.69 4.66 4400 2.87 3.01 3.14 3.27 3.40 3.64 3.75 3.85 4.05 4.23 4.38 4.61 4.72 4.56 4600 2.99 3.13 3.26 3.39 3.52 3.76 3.87 3.97 4.17 4.33 4.48 4.67 4.73 4.42 4800 3.10 3.24 3.38 3.51 3.64 3.87 3.98 4.09 4.27 4.43 4.56 4.71 4.72 4.23 * Endurance time will be reduced in marked area. Please avoid if possible. * The circumferential speed of pulley is 33(m/s)or more; a dynamic balance for the pulley is essential. * Values in the table above are for nominal belt width 100(25.4mm). For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 29. Table 36. Reference Transmission Capacity of H Ps -Nominal Width of Belts 100 (25.4mm)- (kW) No. of Teeth of Small Pulley 14 15 16 18 19 20 21 22 24 25 26 28 30 32 36 40 48 Rotary Speed of Small Pulley(rpm) Diameter of the Pitch Circle(mm) 56.60 60.64 64.68 72.77 76.81 80.85 84.89 88.94 97.02 101.06 105.1 113.19 121.28 129.36 145.53 161.70 194.04 725 1.33 1.43 1.52 1.71 1.81 1.90 2.00 2.09 2.28 2.38 2.47 2.66 2.85 3.04 3.41 3.79 4.53 870 1.60 1.71 1.83 2.05 2.17 2.28 2.40 2.51 2.74 2.85 2.96 3.19 3.41 3.64 4.08 4.53 5.41 950 1.99 2.24 2.37 2.49 2.61 2.74 2.99 3.11 3.23 3.48 3.72 3.97 4.45 4.93 5.89 1160 2.43 2.74 2.89 3.04 3.19 3.34 3.64 3.79 3.94 4.23 4.53 4.82 5.41 5.99 7.12 1425 3.35 3.54 3.72 3.91 4.09 4.45 4.63 4.81 5.17 5.53 5.89 6.59 7.27 8.61 1750 4.11 4.33 4.55 4.78 5.00 5.44 5.66 5.87 6.31 6.73 7.16 7.98 8.79 10.32 2850 7.27 7.61 7.95 8.61 8.93 9.25 9.87 10.48 11.06 12.16 13.15 14.80 3450 8.68 9.07 9.45 10.19 10.55 10.91 11.59 12.24 12.85 13.95 14.87 16.09 100 0.18 0.19 0.21 0.23 0.25 0.26 0.27 0.28 0.31 0.32 0.34 0.36 0.39 0.42 0.47 0.52 0.63 200 0.36 0.39 0.42 0.47 0.50 0.52 0.55 0.57 0.63 0.65 0.68 0.73 0.79 0.84 0.94 1.05 1.26 300 0.55 0.59 0.63 0.71 0.75 0.79 0.83 0.86 0.94 0.98 1.02 1.10 1.18 1.26 1.42 1.57 1.89 400 0.73 0.79 0.84 0.94 1.00 1.05 1.10 1.15 1.26 1.31 1.36 1.47 1.57 1.68 1.89 2.10 2.52 500 0.92 0.98 1.05 1.18 1.25 1.31 1.38 1.44 1.57 1.64 1.71 1.84 1.97 2.10 2.36 2.62 3.14 600 1.10 1.18 1.26 1.42 1.50 1.57 1.65 1.73 1.89 1.97 2.05 2.20 2.36 2.52 2.83 3.14 3.76 700 1.29 1.38 1.47 1.65 1.75 1.84 1.93 2.02 2.20 2.30 2.39 2.57 2.75 2.93 3.30 3.66 4.38 800 1.47 1.57 1.68 1.89 1.99 2.10 2.20 2.31 2.52 2.62 2.73 2.93 3.14 3.35 3.76 4.17 4.99 900 1.65 1.77 1.89 2.13 2.24 2.36 2.48 2.60 2.83 2.95 3.06 3.30 3.53 3.76 4.22 4.68 5.59 1000 2.10 2.36 2.49 2.62 2.75 2.88 3.14 3.27 3.40 3.66 3.92 4.17 4.68 5.19 6.18 1100 2.31 2.60 2.74 2.88 3.02 3.17 3.45 3.59 3.74 4.02 4.30 4.58 5.14 5.69 6.77 1200 2.52 2.83 2.99 3.14 3.30 3.45 3.76 3.92 4.07 4.38 4.68 4.99 5.59 6.18 7.35 1300 3.06 3.23 3.40 3.57 3.74 4.07 4.24 4.40 4.73 5.06 5.39 6.03 6.67 7.91 1400 3.30 3.48 3.66 3.84 4.02 4.38 4.55 4.73 5.09 5.44 5.79 6.48 7.16 8.47 1500 3.53 3.72 3.92 4.11 4.30 4.68 4.87 5.06 5.44 5,81 6.18 6.91 7.63 9.01 1600 3.76 3.97 4.17 4.38 4.58 4.99 5.19 5.39 5.79 6.18 6.57 7.35 8.10 9.55 1700 3.99 4.21 4.43 4.64 4.86 5.29 5.50 5.71 6.13 6.55 6.96 7.77 8.56 10.07 1800 4.22 4.45 4.68 4.91 5.14 5.59 5.81 6.03 6.48 6.91 7.35 8.19 9.01 10.57 1900 4.93 5.17 5.41 5.89 6.12 6.35 6.82 7.27 7.73 8.61 9.46 11.06 2000 5.19 5.44 5.69 6.18 6.43 6.67 7.16 7.63 8.10 9.01 9.89 11.53 2100 5.44 5.70 5.96 6.48 6.73 6.99 7.49 7.98 8.47 9.41 10.32 11.99 2200 5.69 5.96 6.23 6.77 7.03 7.30 7.82 8.33 8.83 9.81 10.73 12.43 2300 5.94 6.22 6.50 7.06 7.33 7.61 8.15 8.68 9.19 10.19 11.14 12.85 2400 6.18 6.48 6.77 7.35 7.63 7.91 8.47 9.01 9.55 10.57 11.53 13.25 2500 6.43 6.73 7.03 7.63 7.93 8.22 8.79 9.35 9.89 10.94 11.91 13.63 2600 6.67 6.99 7.30 7.91 8.22 8.52 9.10 9.68 10.24 11.30 12.28 13.99 2800 7.16 7.49 7.82 8.47 8.79 9.10 9.72 10.32 10.90 11.99 12.99 14.65 3000 7.63 7.98 8.33 9.01 9.35 9.68 10.32 10.94 11.53 12.64 13.63 15.21 3200 8.10 8.47 8.83 9.55 9.89 10.24 10.90 11.53 12.14 13.25 14.22 15.67 3400 8.56 8.95 9.33 10.07 10.42 10.78 11.45 12.10 12.71 13.81 14.75 16.02 3600 9.01 9.41 9.81 10.57 10.94 11.30 11.99 12.64 13.25 14.33 15.21 16.26 3800 10.28 11.06 11.44 11.80 12.50 13.15 13.75 14.80 15.60 16.38 4000 10.73 11.53 11.91 12.28 12.99 13.63 14.22 15.21 15.92 16.37 4200 11.18 11.99 12.37 12.75 13.44 14.08 14.65 15.56 16.16 16.23 4400 11.61 12.43 12.81 13.19 13.87 14.49 15.03 15.86 16.31 15.94 4600 12.03 12.85 13.23 13.60 14.28 14.87 15.37 16.09 16.39 15.51 4800 12.43 13.25 13.63 13.99 14.65 15.21 15.67 16.26 16.37 14.93 * Endurance time will be reduced in marked area. Please avoid if possible. * The circumferential speed of pulley is 33(m/s)or more; a dynamic balance for the pulley is essential. * Values in the table above are for nominal belt width 100(25.4mm). For other belt widths, those values should be multiplied by the width correction coefficient, Kb, shown in Table 29.
RkJQdWJsaXNoZXIy MTc2MTk0OA==