Servo couplings / hub clamping, key / 1 disc, 2 discs: CFRP / body: aluminium

Click on this image to zoom in.

View the FAQ (4)

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Couplings/High Torque Disc/Clamping:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Claw Couplings

Tolerances for d1 and d2 are values before slit machining.
The lateral, angular, and axial misalignment values shown are for each occurring individually. When multiple misalignments are occurring simultaneously, the allowable maximum value of each will be reduced to 1/2.
For the selection criteria and alignment procedures, see >> P.1061

Standard Bore	Keywayed Bore			Material		Surface Treatment	Accessory
	d₁ (One Side)	d₂ (One Side)	d₁, d₂ (Both Sides)	Main Body	Disc	Main Body
MCKLC	MCKLCLK	MCKLCRK	MCKLCWK	Aluminum Diecast	Carbon Fiber	Electroless Nickel Plating	Hex Socket Head Cap Screw
MCKSC	-	-	MCKSCWK

Further specifications can be found under the tab More information.

Composition of a Product Code - Claw Couplings

Part Number	-	Shaft Bore Dia. d₁	-	Shaft Bore Dia. d₂
MCKLC16	-	5	-	6
MCKLCWK40	-	12	-	15

Alterations - Claw Couplings

General Information - Claw Couplings

Shaft coupling - compensation coupling - Oldham coupling - slit coupling - chain coupling - disc coupling - bellow coupling - product assortment

Shaft Coupling Selection Details

- Material: aluminum, aluminum alloy, steel, stainless steel, plastic

- Coupling buffer material: polyacetal, polyurethane, nylon, aluminum bronze, carbon fibre reinforced polymer (CFRP)

- Disc material: stainless steel, polyimide, carbon fibre (carbon)

- Fastening: hub clamping, half shell clamping, threaded pin clamping, clamping sleeve, keyway

- Design: slit coupling, disc coupling (servo coupling), Oldham coupling, dog coupling, jaw coupling, bellow coupling, metal bellow coupling, elastomer coupling

- ISO tolerances: H8

- Shaft diameter: 1 to 45 mm

- Outer diameter: 6 to 95 mm

- Length: 8.4 to 100 mm

- Offset: angle offset, radial offset, axial offset

Design Overview

Description/Basics

A shaft coupling, also called a compensating coupling, is generally used for the transmission of torque for mechanical engineering. Flexible shaft couplings (non-rigid) can compensate for lateral, axial and angular offsets (misalignment). Therefore, these are common connecting elements between motors and axles/shafts or even ball screws.

There are various types of designs, such as the jaw couplings, disc couplings (servo couplings), slit couplings, bellow couplings, Oldham couplings and many others, which are selected depending on the type of misalignment. You can determine which design is the right one for transmission in your application with the Coupling Selection Method available as a PDF.

When the shaft coupling is professionally installed, the transmission of rotational forces should be slip-free. To do this, the appropriate shaft coupling must be selected depending on the application. Here, it is important to observe the degree of misalignment, the maximum speed of rotation and the permissible torque of the compensation coupling and not to exceed these values during operation. If several misalignments occur at the same time, it is recommended to reduce the maximum value of the specified misalignment by approximately half.

The most commonly used elastomer coupling is the jaw coupling, which consists of a plastic buffer with damping properties. As a result, shocks and vibrations in a drive system can be damped, which protects adjacent components in the transmission of force. Our product range offers you alternative materials for the elastomers. These include among others aluminum bronze and carbon fibre-reinforced plastic.

The different shaft connections on the compensation couplings allow various connection variants for assembly. For this purpose, hub clamping, half shell clamping, slot clamping, threaded pin clamping, chip sleeve and keyways are available.
If a keyway is selected for a MISUMI shaft coupling, it is recommended obtaining the MISUMI machine key, as it is best to combine these.

A shaft coupling can be used for precise positioning. These are often combined together with slide screws or ball screws. A disc clutch (servo coupling) is suitable for this application, since it has a high torsional rigidity.

In addition to the standardized diameter of the shaft bore, MISUMI offers the option LDC and RDC, which allows the drill diameter to be adjusted to the shaft end in 0.1 mm increments.

Application Examples - Claw Couplings

Application example: shaft coupling - disc coupling with servo motor - disc coupling with ball screw drive - shaft clutch with servo motor - shaft clutch with ball screw drive

Shaft coupling with servo motor and ball screw
(1) Servo motor, (2) disc coupling (servo coupling), (3) ball screw

Application example: shaft coupling with encoder - shaft coupling with bearing housing - slit coupling with encoder - slit coupling with bearing housing -

Slit coupling with encoder
(1) Bearing with housing, (2) shaft coupling, (3) motor, (4) axles/shafts

Application example - Performance test stand with shaft coupling - Oldham coupling with engine - test stand with Oldham coupling

Engine test stand with Oldham coupling
(1) X-axis positioning stage, (2) performance test station, (3) shaft coupling, (4) brackets, L-shaped

Application example: synchronous pulley with shaft coupling - shaft coupling with motor and gearbox

Shaft coupling with motor and gearbox
(1) Motor, (2) Shaft coupling, (3) Conversion/Reducing gears, (4) Timing pulleys / Idlers

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
MCKLC50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24]
MCKLC50-[14,15,16,18,20,22,24]-RDC[14-24/0.1]
MCKLC50-LDC[14-24/0.1]-[14,15,16,18,20,22,24]
MCKLC50-LDC[14-24/0.1]-RDC[14-24/0.1]
MCKLCLK50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24]
MCKLCLK50-[14,15,16,18,20,22,24]-RDC[14-24/0.1]
MCKLCLK50-LDC[14-24/0.1]-[14,15,16,18,20,22,24]
MCKLCLK50-LDC[14-24/0.1]-RDC[14-24/0.1]
MCKLCRK50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24]
MCKLCRK50-[14,15,16,18,20,22,24]-RDC[14-24/0.1]
MCKLCRK50-LDC[14-24/0.1]-[14,15,16,18,20,22,24]
MCKLCRK50-LDC[14-24/0.1]-RDC[14-24/0.1]
MCKLCWK50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24]
MCKLCWK50-[14,15,16,18,20,22,24]-RDC[14-24/0.1]
MCKLCWK50-LDC[14-24/0.1]-[14,15,16,18,20,22,24]
MCKLCWK50-LDC[14-24/0.1]-RDC[14-24/0.1]
MCKSC50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24]
MCKSC50-[14,15,16,18,20,22,24]-RDC[14-24/0.1]
MCKSC50-LDC[14-24/0.1]-[14,15,16,18,20,22,24]
MCKSC50-LDC[14-24/0.1]-RDC[14-24/0.1]
MCKSCWK50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24]
MCKSCWK50-[14,15,16,18,20,22,24]-RDC[14-24/0.1]
MCKSCWK50-LDC[14-24/0.1]-[14,15,16,18,20,22,24]
MCKSCWK50-LDC[14-24/0.1]-RDC[14-24/0.1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Allowable Torque Range (N•m)	Shaft Bore Dia. 1 d1 (or d) (mm)	Shaft Bore Dia. 2 d2 (or d) (mm)	O.D. D (mm)	Overall Length (mm)	Max. Rotational Speed Range (r/min)	Allowable Torque (Nm)	Max. Rotational Speed (r/min)	Allowable Lateral Misalignment Range (mm)	Allowable Lateral Misalignment (mm)	Allowable Angular Misalignment (deg)	Allowable Axial Misalignment (mm)	Moment of Inertia (kg･m²)	Single/Double	Shaft Bore Shape	Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment	Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment
1	7 Days	10	10.01 to 20.00	14 ～ 24	14 ～ 24	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Standard Holes	-	-
1	7 Days	10	10.01 to 20.00	14 ～ 24	-	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Standard Holes	-	14 ～ 24
1	7 Days	10	10.01 to 20.00	-	14 ～ 24	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Standard Holes	14 ～ 24	-
1	7 Days	10	10.01 to 20.00	-	-	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Standard Holes	14 ～ 24	14 ～ 24
1	7 Days	10	10.01 to 20.00	14 ～ 24	14 ～ 24	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d1 Side	-	-
1	7 Days	10	10.01 to 20.00	14 ～ 24	-	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d1 Side	-	14 ～ 24
1	7 Days	10	10.01 to 20.00	-	14 ～ 24	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d1 Side	14 ～ 24	-
1	7 Days	10	10.01 to 20.00	-	-	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d1 Side	14 ～ 24	14 ～ 24
1	7 Days	10	10.01 to 20.00	14 ～ 24	14 ～ 24	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d2 Side	-	-
1	7 Days	10	10.01 to 20.00	14 ～ 24	-	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d2 Side	-	14 ～ 24
1	7 Days	10	10.01 to 20.00	-	14 ～ 24	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d2 Side	14 ～ 24	-
1	7 Days	10	10.01 to 20.00	-	-	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d2 Side	14 ～ 24	14 ～ 24
1	7 Days	10	10.01 to 20.00	14 ～ 24	14 ～ 24	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d1/d2 Side	-	-
1	7 Days	10	10.01 to 20.00	14 ～ 24	-	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d1/d2 Side	-	14 ～ 24
1	7 Days	10	10.01 to 20.00	-	14 ～ 24	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d1/d2 Side	14 ～ 24	-
1	7 Days	10	10.01 to 20.00	-	-	50	53	2001 to 4,000	11	3500	0.21 to 0.40	0.3	2.5	+0.5/-0.5	4.6x10^-5	Double	Hole with Keyway d1/d2 Side	14 ～ 24	14 ～ 24
1	7 Days	10	10.01 to 20.00	14 ～ 24	14 ～ 24	50	41	2001 to 4,000	11	3500	0.02 to 0.2	0.1	1	+0.2/-0.2	3.6x10^-5	1-fach	Standard Holes	-	-
1	7 Days	10	10.01 to 20.00	14 ～ 24	-	50	41	2001 to 4,000	11	3500	0.02 to 0.2	0.1	1	+0.2/-0.2	3.6x10^-5	1-fach	Standard Holes	-	14 ～ 24
1	7 Days	10	10.01 to 20.00	-	14 ～ 24	50	41	2001 to 4,000	11	3500	0.02 to 0.2	0.1	1	+0.2/-0.2	3.6x10^-5	1-fach	Standard Holes	14 ～ 24	-
1	7 Days	10	10.01 to 20.00	-	-	50	41	2001 to 4,000	11	3500	0.02 to 0.2	0.1	1	+0.2/-0.2	3.6x10^-5	1-fach	Standard Holes	14 ～ 24	14 ～ 24
1	7 Days	10	10.01 to 20.00	14 ～ 24	14 ～ 24	50	41	2001 to 4,000	11	3500	0.02 to 0.2	0.1	1	+0.2/-0.2	3.6x10^-5	1-fach	Hole with Keyway d1/d2 Side	-	-
1	7 Days	10	10.01 to 20.00	14 ～ 24	-	50	41	2001 to 4,000	11	3500	0.02 to 0.2	0.1	1	+0.2/-0.2	3.6x10^-5	1-fach	Hole with Keyway d1/d2 Side	-	14 ～ 24
1	7 Days	10	10.01 to 20.00	-	14 ～ 24	50	41	2001 to 4,000	11	3500	0.02 to 0.2	0.1	1	+0.2/-0.2	3.6x10^-5	1-fach	Hole with Keyway d1/d2 Side	14 ～ 24	-
1	7 Days	10	10.01 to 20.00	-	-	50	41	2001 to 4,000	11	3500	0.02 to 0.2	0.1	1	+0.2/-0.2	3.6x10^-5	1-fach	Hole with Keyway d1/d2 Side	14 ～ 24	14 ～ 24

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Open the technical drawing in the new window

Specification Tables - Claw Couplings

Part Number		d₁, d₂ Selection (d₁≤d₂) Keywayed Bore Type is selectable for diameter 6 or larger																		d₃	L	ℓ	A	F	Clamp Screw		Unit Price
Type	D																			d₃	L	ℓ	A	F	M	Tightening Torque (N • m)	MCKLC	MCKLCLK MCKLCRK	MCKLCWK
Double Disc Type MCKLC MCKLCLK MCKLCRK MCKLCWK	13	*3	4	5																5.5	19	5.5	4.1	2.5	M2	0.42		-	-
	16		*4	5	6															6.8	23.2	7	5	3	M2.5	1
	20		*4	5	6	6.35	7	8												8.1	26	7.5	6.5	3.7	M2.5	1
	25			*5	6	6.35	7	8	9.53	10										10.4	30.2	9	8.5	4	M3	1.7
	32							8	9.53	10	11	12	14							15	41	12.4	10	6	M4	2.5
	40							8	9.53	10	11	12	14	15	16	18				19.5	47	15.5	13.1	7.8	M5	7
	50												14	15	16	18	20	22	24	25	53	18	16.7	9	M6	12

Part Number		d₁, d₂ Selection (d₁≤d₂) Keywayed Bore Type is selectable for diameter 6 or larger																		L	ℓ	A	F	Clamp Screw		Unit Price
Type	D																			L	ℓ	A	F	M	Tightening Torque (N • m)	MCKSC	MCKSCWK
Single Disc Type MCKSC MCKSCWK	13	*3	4	5																13.5	5.5	4.1	2.5	M2	0.42		-
	16		*4	5	6															16.5	7	5	3	M2.5	1
	20		*4	5	6	6.35	7	8												18.4	7.5	6.5	3.7	M2.5	1
	25			*5	6	6.35	7	8	9.53	10										21.6	9	8.5	4	M3	1.7
	32							8	9.53	10	11	12	14							29	12.4	10	6	M4	2.5
	40							8	9.53	10	11	12	14	15	16	18				35	15.5	13.1	7.8	M5	7
	50												14	15	16	18	20	22	24	41	18	16.7	9	M6	12

When d₁ is *3, *4, *5, use with the load torque 50% or less than that shown in the table to prevent slipping.

■Double Disc Type

Part Number		Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	D	Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
MCKLC MCKLCLK MCKLCRK MCKLCWK	13	0.35	2.5	0.2	80	12000	8.0x10^-8	±0.2	5
	16	0.6			130	9000	2.4x10^-7	±0.3	9
	20	0.9			220	7600	7.2x10^-7	±0.3	14
	25	2.2			440	6000	2.2x10^-6	±0.4	27
	32	3.8			960	4800	6.0x10^-6	±0.4	60
	40	6.8		0.3	1900	4000	1.7x10^-5	±0.5	104
	50	11.0		0.3	2250	3500	4.6x10^-5	±0.5	210

■Single Disc Type

Part Number		Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	D	Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
MCKSC MCKSCWK	13	0.35	1	0.05	100	12000	7.0x10^-8	±0.1	4
	16	0.6			160	9000	2.0x10^-7		7
	20	0.9			290	7600	6.0x10^-7		11
	25	2.2			550	6000	1.8x10^-6	±0.2	22
	32	3.8			1200	4800	5.2x10^-6		50
	40	6.8		0.1	2200	4000	1.3x10^-5		85
	50	11.0		0.1	2600	3500	3.6x10^-5		170

Alterations - Claw Couplings

Products homepage

Basic information

Series Name	Disc Type	Allowable Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	Application	Standard
Features	High Torsional Rigidity / High Torque Type / Zero Backlash / Low Moment of Inertia	Body Material	Aluminum	Category	Coupling Main Body
Disc Material	Carbon Fiber

Configure

24Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shaft Bore Dia. 1 d1 (or d)(mm)
3

4

5

6

6.35

7

8

9.53

10

11

12

14

15

16

18

20

22

24
Clear
Shaft Bore Dia. 2 d2 (or d)(mm)
3

4

5

6

6.35

7

8

9.53

10

11

12

14

15

16

18

20

22

24
Clear
O.D. D(mm)
13

16

20

25

32

40

50
Clear
Overall Length(mm)
13.5

16.5

18.4

19

21.6

23.2

26

29

30.2

35

41

47

53
Clear
Max. Rotational Speed Range(r/min)
2001 to 4,000

4,001 to 10,000

10,001 to 78,000
Clear
Allowable Torque(Nm)
0.35

0.6

0.9

2.2

3.8

6.8

11
Clear
Max. Rotational Speed(r/min)
3500

4000

4800

6000

7600

9000

12000
Clear
Allowable Lateral Misalignment Range(mm)
0.02 to 0.2

0.21 to 0.40
Clear
Allowable Lateral Misalignment(mm)
0.05

0.1

0.2

0.3
Clear
Allowable Angular Misalignment(deg)
1

2.5
Clear
Single/Double
- 1-fach
- Double
Clear
Shaft Bore Shape
Hole with Keyway d1 Side

Hole with Keyway d1/d2 Side

Hole with Keyway d2 Side

Standard Holes
Clear
Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment
[14-24/0.1]
Clear
Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment
[14-24/0.1]
Clear
Type
- MCKLC
- MCKLCLK
- MCKLCRK
- MCKLCWK
- MCKSC
- MCKSCWK
Clear
Allowable Torque Range(N•m)
0.05 to 1.00

1.01 to 3.00

3.01 to 5.00

5.01 to 10.00

10.01 to 20.00
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

7 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
Can a claw coupling compensate for an angle?: Answer:
As a rule, a claw coupling can compensate for an angular offset. How large this angle may be depends on the respective claw coupling. Here, it is recommended to always refer to the technical information in the data sheet. If there are other misalignments, there is a possibility that the amount of the compensation will be reduced depending on the coupling type. There are notes on this for the shaft couplings.
Question:
Which coupling is suitable for a servo motor?: Answer:
A disc coupling can be used with a servo motor application. These have a good torsion rigidity, which is necessary for applications with alternating direction of rotation. These couplings are often used in positioning applications. Here, it is recommended to assume the peak torque of the servo motor and to use the compensation factor found on the product page as safety. The permissible torque of the shaft coupling should be higher than the determined value.
Question:
What temperature can an elastomeric clutch withstand?: Answer:
The temperatures that a claw coupling or Oldham coupling with elastomer buffer can withstand depend on the material used. The permissible temperature is noted for the respective product. However, when designing the shaft coupling, the temperature correction factor should be taken into account in the calculation. You can find it in the shaft coupling selection procedure as a PDF.
Question:
Which coupling compensates for a high angular offset?: Answer:
A metal bellow coupling can be a possible variant in the case of a high angle offset. This variant of a shaft coupling can compensate an angular offset of up to approx. 2°. This is made possible by the flexible bellow coupling.