Hexagonal rods / stainless steel, steel / black oxided, nickel-plated / end forms selectable (Part Numbers - CAD Download)
(i)Remark
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
Back to the Category Distance elements (hexagonal, square, cylindrical)
Technical Drawing - Hexagonal Rods
Open the technical drawing in the new window
Available dimensions and tolerances can be found under the tab More information.
Basic Properties (e.g., material, hardness, coating, tolerance) - Hexagonal Rods
| Type | Material | Surface Treatment | |||||
| Both Ends Tapped | One End Threaded One End Tapped | Both Ends Threaded | |||||
| Pilot Selectable | Pilot Configurable | Pilot Selectable | Pilot Configurable | Pilot Selectable | Pilot Configurable | ||
| NLSBJ | NLSBJF | NLSBK | NLSBKF | NLSBM | NLSBMF | EN 1.0038 Equiv. | - |
| LSBJ | LSBJF | LSBK | LSBKF | LSBM | LSBMF | Black Oxide | |
| PLSBJ | PLSBJF | PLSBK | PLSBKF | PLSBM | PLSBMF | Electroless Nickel Plating | |
| SLSBJ | SLSBJF | SLSBK | SLSBKF | SLSBM | SLSBMF | EN 1.4301 Equiv. | - |
Further specifications can be found under the tab More information.
Composition of a Product Code - Hexagonal Rods
| Part Number | - | L | - | M | - | N | - | G | - | H |
| LSBJ10 PLSBJ27W LSBMF10 | - - - | 350 600 300 | - - - | M5 M8 M5 | - - - | N4 N8 N5 | - | G3 | - | H2 |
Alterations - Hexagonal Rods
General Information - Hexagonal Rods
Selection details of spacers/spacers (hexagonal, square, cylindrical)
- Material: aluminum, steel, stainless steel, PMMA, PEEK
- Coatings: uncoated, burnished, chemically nickel-plated, anodized, chromated
- Basic shapes: hexagon, square, round
- End forms: straight, female thread, male thread, female thread with centering pin
- Outer diameter (round): 4 to 50 mm
- Spanner flat (hexagon, square): 4 to 32 mm
- Length: 5 to 800 mm
- Threads: M2 to M24
Description/Basics
Spacers are generally used as spacing connections. Due to their diversity, the wide range of design concepts can be realized with spacer bolts and practically every application can be realized using the appropriate spacer bolt.
The design and assembly of thin plates makes it extremely difficult to work with counterbores or internal threads. Therefore, spacer bolts are often used on plates, sheet metal or printed circuit boards (PCB).
The selectable assembly threads, the individually configurable length of the spacers, and the selectable length tolerance via the [LKC] option offer great design freedom compared to conventional mass-produced products. This advantage is particularly important if, for example, plates of different thicknesses or particularly thin plates are utilized.
For applications with particularly high positioning requirements, it is recommended to combine shim rings with a spacer. These can be configured in thicknesses from 0.01 to 1 mm and integrated as an additional compensating element.
The assembly of hexagonal spacers is particularly easy with the hex, since they can be held against one another with an open-ended spanner. With round spacer bolts, this can be realized with a spanner flat. The spacer bolts are also available with one-sided or two-sided internal thread (long nut). For precise positioning of a spacer bolt with an internal thread or external thread, MISUMI also offers a centering pin in the ISO tolerance h7.
This variety enables virtually barrier-free assembly of the components to be joined with screws, internal threads and external threads or nuts.
Application Examples - Hexagonal Rods
Application example: spacer bolt with external thread
(1) Spacer bolts with external thread on both sides, (2) mounting plate, (3) nut
Application example: spacer bolts with internal thread
(1) Spacer with internal thread on both sides, (2) mounting plate, (3) screw
Application example: spacer with tappet
(1) Distance bolts with centering pin, (2) mounting plate, (3) nut, (4) screw
Application example: threaded spacer pin
(1) spacer bolts with internal thread and external thread, (2) mounting plate, (3) nut, (4) screw
Industrial Applications
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Wrench Flats B (or D) (mm) | Length L (mm) | Material | Surface Treatment | Pilot Dia. P, V (Ø) | Thread Dia. M (mm) | Screw Dia. N (mm) | One Side Base Surface Width (W) (mm) | H (mm) | Screw Length G (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 6 Days | 10 | 8 | 15 ～ 250 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 10 | 15 ～ 350 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | 1 | - | - | ||
| 1 | 4 Days | 10 | 8 | 15 ～ 250 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | 1 | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 15 ～ 350 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | 1 | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | 1 | - | - | ||
| 1 | 4 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | 1 | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | 1 | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | - | - | - | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | - | - | - | ||
| 1 | 4 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | - | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Black Oxide | - | 4 | 4 | - | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 15 ～ 250 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 10 | 15 ～ 350 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | 1 | - | - | ||
| 1 | 4 Days | 10 | 8 | 15 ～ 250 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | 1 | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 15 ～ 350 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | 1 | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | 1 | - | - | ||
| 1 | 4 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | 1 | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | 1 | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | - | - | - | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | - | - | - | ||
| 1 | 4 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | - | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Not Provided | - | 4 | 4 | - | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 15 ～ 250 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 10 | 15 ～ 350 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 8 | 15 ～ 250 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | 1 | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 6 Days | 10 | 10 | 15 ～ 350 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | 1 | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | 1 | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | 1 | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | - | - | - | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | - | - | - | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | - | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Steel] EN 1.0038 Equiv. | Electroless Nickel Plating | - | 4 | 4 | - | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 15 ～ 250 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 10 | 15 ～ 350 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | 1 | - | - | ||
| 1 | 4 Days | 10 | 8 | 15 ～ 250 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | 1 | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 15 ～ 350 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | 1 | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | 1 | - | - | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | 1 | - | - | ||
| 1 | 4 Days | 10 | 8 | 20 ～ 250 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | 1 | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 20 ～ 350 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | 1 | 2 ～ 5 | 2 ～ 5 | ||
| 1 | 6 Days | 10 | 8 | 20 ～ 250 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | - | - | - | ||
| 1 | 6 Days | 10 | 10 | 20 ～ 350 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | - | - | - | ||
| 1 | 4 Days | 10 | 8 | 20 ～ 250 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | - | 2 ～ 4 | 2 ～ 4 | ||
| 1 | 4 Days | 10 | 10 | 20 ～ 350 | [Stainless Steel] EN 1.4301 Equiv. | Not Provided | - | 4 | 4 | - | 2 ～ 5 | 2 ～ 5 |
Loading...
Back to the Category Distance elements (hexagonal, square, cylindrical)
Technical Drawing - Hexagonal Rods
Open the technical drawing in the new window
Specification Tables - Hexagonal Rods
| Part Number | L 0.5mm Increment | M (Coarse) / N (Coarse) Selection | G 1mm Increment Pilot Configurable Only | H 1mm Increment Pilot Configurable Only | E | F | P | V | W | (C) | ||||||||||
| Type | B | |||||||||||||||||||
| Pilot Selectable EN 1.0038 Equiv. NLSBJ LSBJ PLSBJ EN 1.4301 Equiv. SLSBJ | Pilot Configurable EN 1.0038 Equiv. NLSBJF LSBJF PLSBJF EN 1.4301 Equiv. SLSBJF | 8 | 15~250 | 3 | 4 | 2~ 4 | 2~ 4 | 4 | 4 | 6 | 6 | 1 | 9.2 | |||||||
| 10 | 15~350 | 4 | 5 | 2~ 5 | 2~ 5 | 5 | 5 | 8 | 8 | 1 | 11.5 | |||||||||
| 12 | 20~400 | 5 | 6 | 2~ 6 | 2~ 6 | 6 | 6 | 10 | 10 | 1 | 13.9 | |||||||||
| 13 | 20~400 | 5 | 6 | 2~ 6 | 2~ 6 | 6 | 6 | 10 | 10 | 1.5 | 15 | |||||||||
| 14 | 25~500 | 6 | 8 | 2~ 8 | 2~ 8 | 8 | 8 | 12 | 12 | 1 | 16.2 | |||||||||
| 17 | 25~500 | 6 | 8 | 2~ 8 | 2~ 8 | 8 | 8 | 12 | 12 | 2.5 | 19.6 | |||||||||
| 19 | 40~500 | 6 | 8 | 10 | 12 | 2~10 | 2~10 | 10 | 10 | 16 | 16 | 1.5 | 21.9 | |||||||
| 24 | 50~600 | 6 | 8 | 10 | 12 | 16 | 2~12 | 2~12 | 12 | 12 | 20 | 20 | 2 | 27.7 | ||||||
| 27 | 50~700 | 6 | 8 | 10 | 12 | 16 | 2~16 | 2~16 | 16 | 16 | 24 | 24 | 1.5 | 31.2 | ||||||
| 27W | 20 | 20 | 3.5 | |||||||||||||||||
| 30 | 60~800 | 6 | 8 | 10 | 12 | 16 | 20 | 2~16 | 2~16 | 16 | 16 | 28 | 28 | 1 | 34.6 | |||||
| 30W | 24 | 24 | 3 | |||||||||||||||||
| 32 | 60~800 | 6 | 8 | 10 | 12 | 16 | 20 | 2~20 | 2~20 | 20 | 20 | 30 | 30 | 1 | 36.9 | |||||
| 32W | 24 | 24 | 4 | |||||||||||||||||
■One End Threaded One End Tapped
| Part Number | L 0.5mm Increment | M (Coarse) / N (Coarse) Selection [ ! ]＊Available only for Pilot Configurable | G 1mm Increment [ ! ]Available only for Pilot Configurable | H 1mm Increment [ ! ]Available only for Pilot Configurable | E | F | P | V | W | (C) | ||||||||||
| Type | B | |||||||||||||||||||
| Pilot Selectable EN 1.0038 Equiv. NLSBK LSBK PLSBK EN 1.4301 Equiv. SLSBK | Pilot Configurable EN 1.0038 Equiv. NLSBKF LSBKF PLSBKF EN 1.4301 Equiv. SLSBKF | 8 | 20~250 | 3 | 4 | 2~ 4 | 2~ 4 | 2 | 4 | 6 | 6 | 1 | 9.2 | |||||||
| 10 | 20~350 | 4 | 5 | 2~ 5 | 2~ 5 | 2 | 5 | 8 | 8 | 1 | 11.5 | |||||||||
| 12 | 25~400 | 5 | 6 | 2~ 6 | 2~ 6 | 3 | 6 | 10 | 10 | 1 | 13.9 | |||||||||
| 13 | 25~400 | 5 | 6 | 2~ 6 | 2~ 6 | 3 | 6 | 10 | 10 | 1.5 | 15 | |||||||||
| 14 | 30~500 | 6 | 8 | 2~ 8 | 2~ 8 | 4 | 8 | 12 | 12 | 1 | 16.2 | |||||||||
| 17 | 30~500 | 6 | 8 | 2~ 8 | 2~ 8 | 4 | 8 | 12 | 12 | 2 | 19.6 | |||||||||
| 19 | 45~500 | 6 | 8 | 10 | 12 | 2~10 | 2~10 | 5 | 10 | 16 | 16 | 1.5 | 21.9 | |||||||
| 24 | 55~600 | 6 | 8 | 10 | 12 | 16 | 2~12 | 2~12 | 6 | 12 | 20 | 20 | 2.5 | 27.7 | ||||||
| 27 | 55~700 | 6 | 8 | 10 | 12 | 16 | 2~16 | 2~16 | 7 | 16 | 24 | 24 | 1.5 | 31.2 | ||||||
| 27W | 20 | 20 | 3.5 | |||||||||||||||||
| 30 | 65~800 | ＊6 | 8 | 10 | 12 | 16 | 20 | 2~16 | 2~16 | 8 | 16 | 28 | 28 | 1 | 34.6 | |||||
| 30W | 24 | 24 | 3 | |||||||||||||||||
| 32 | 65~800 | ＊6 | 8 | 10 | 12 | 16 | 20 | 2~20 | 2~20 | 8 | 20 | 30 | 30 | 1 | 36.9 | |||||
| 32W | 24 | 24 | 4 | |||||||||||||||||
■Both Ends Threaded
| Part Number | L 0.5mm Increment | M (Coarse) / N (Coarse) Selection | G 1mm Increment Pilot Configurable Only | H 1mm Increment Pilot Configurable Only | E | F | (C) | |||||||||||
| Type | B | |||||||||||||||||
| Pilot Selectable EN 1.0038 Equiv. NLSBM LSBM PLSBM EN 1.4301 Equiv. SLSBM | Pilot Configurable EN 1.0038 Equiv. NLSBMF LSBMF PLSBMF EN 1.4301 Equiv. SLSBMF | 8 | 20~250 | 3 | 4 | 5 | 2~ 4 | 2~ 4 | 4 | 4 | 9.2 | |||||||
| 10 | 20~350 | 4 | 5 | 6 | 2~ 5 | 2~ 5 | 5 | 5 | 11.5 | |||||||||
| 12 | 25~400 | 5 | 6 | 8 | 2~ 6 | 2~ 6 | 6 | 6 | 13.9 | |||||||||
| 13 | 25~400 | 5 | 6 | 8 | 2~ 6 | 2~ 6 | 6 | 6 | 15 | |||||||||
| 14 | 30~500 | 6 | 8 | 10 | 2~ 8 | 2~ 8 | 8 | 8 | 16.2 | |||||||||
| 17 | 30~500 | 6 | 8 | 10 | 2~ 8 | 2~ 8 | 8 | 8 | 19.6 | |||||||||
| 19 | 45~500 | 6 | 8 | 10 | 12 | 2~10 | 2~10 | 10 | 10 | 21.9 | ||||||||
| 24 | 55~600 | 6 | 8 | 10 | 12 | 16 | 2~12 | 2~12 | 12 | 12 | 27.7 | |||||||
| 27 | 55~700 | 6 | 8 | 10 | 12 | 16 | 20 | 2~16 | 2~16 | 16 | 16 | 31.2 | ||||||
| 30 | 65~800 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 2~16 | 2~16 | 16 | 16 | 34.6 | |||||
| 32 | 65~800 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 2~20 | 2~20 | 20 | 20 | 36.9 | |||||
L 15~300 ±0.1
L300.5~600 ±0.3
L600.5~800 ±0.4
However, when L≤200, and when the order volume at one time is less than 10 pcs., the processing is done simultaneously. The difference in L dimension in one order is within ±0.02.
Except L Dimension Selectable
Alterations - Hexagonal Rods
Basic information
| Scale | W/o Scale | Pilot (Concave-Convex at End) | Provided |
|---|
Configure
Basic Attributes
-
Wrench Flats B (or D)(mm)
-
Length L(mm)
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Pilot Dia. P, V(Ø)
- 20
- 24
- 28
- 30
-
One Side Base Surface Width (W)(mm)
- 1
- 1.5
- 2
- 2.5
- 3
- 3.5
- 4
-
H(mm)
-
Screw Length G(mm)
-
Type
- LSBJ
- LSBJF
- LSBK
- LSBKF
- LSBM
- LSBMF
- NLSBJ
- NLSBJF
- NLSBK
- NLSBKF
- NLSBM
- NLSBMF
- PLSBJ
- PLSBJF
- PLSBK
- PLSBKF
- PLSBM
- PLSBMF
- SLSBJ
- SLSBJF
- SLSBK
- SLSBKF
- SLSBM
- SLSBMF
-
Thread Dia. M(mm)
-
Screw Dia. N(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 4 Days or Less
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently Asked Questions (FAQ)
-
Question:
Do you also have hollow spacers?
-
Answer:
Spacers or spacer bolts are generally made of solid material. However, if a hollow spacer is required, MISUMI also offers spacer sleeves. These are configurable like the spacers and can be adapted to the required dimensions. For precise distance, we recommend selecting simultaneous grinding spacer sleeves.
-
Question:
Are the spacers stainless?
-
Answer:
The spacers and spacer bolts can be selected in stainless steel and in steel with surface coating. To select the coating, the spacers are available in burnished, chemically nickel-plated, clear anodized, chromated. Thus, depending on the application, the spacer bolts are protected against corrosion.
-
Question:
Do you have spacer bolts with an undercut?
-
Answer:
MISUMI offers an additional option [FC] the spacer bolts for an undercut. With this option, a cutout is added to the external thread of the spacer bolt. The dimensions of the cutout can be found in the overview as a PDF.
Complementary Products
-
Hexagonal rods / stainless steel, steel / black oxided, nickel-plated / one-sided external thread, internal thread
MISUMI Shipping Days: 4 Days
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.