Plates / HANENITE® / low elasticity / A35, A53 / through hole / adhesive layer (UNSEA5-80)

Plates / HANENITE® / low elasticity / A35, A53 / through hole / adhesive layer  UNSEA5-80
  • Volume Discount

Product Details:

Manufacturer part number: UNSEA5-80

Brand: MISUMI

Price: 43.15

Delivery time: 7 Days


Technical Data:

Grade, Type: [Low Elasticity Rubber] HANENITE®GP-35LE

With or w/o Adhesive: Adhesive

Thickness T: 5 mm

Width A: 80 mm

Length B: 500 mm


  • Order quantities extended (D-JIT)

Data sheet

Unit еxample related to this product

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

UNSEA5-80

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Low Elastic Rubber Sheets/Standard A/B Dimensions:Related Image
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)

A Selectable TypeA, B Configurable Type Material HardnessColor
No AdhesiveAdhesiveNo AdhesiveAdhesive
UNSEUNSEAUNSETUNSETALow Elasticity Rubber (HANENITE® GP-35LE)Shore A35Black
UNLEUNLEAUNLETUNLETALow Elasticity Rubber (HANENITE® GP-60LE)Shore A53Black
HANENITE® is a registered trademark of Naigai Rubber Industry Co., Ltd.
Adhesive thickness is 0.14 ~ 0.2mm.
Has slightly more stickiness.

Further specifications can be found under the tab More information.
 

Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)

■Square Type, Band Type
Part Number-A
UNSE10 -100
■A, B Configurable - Standard / Hole Type
Part Number-A-B-F-G-Screw Nominal Dia.
UNSET10 -110-65      
UNSET4H20-200-150-F140-G100-Z5
 

Alterations - Panels (polyurethane rubber, rubber, foam, felt)


Low Elastic Rubber Sheets/Standard A/B Dimensions:Related Image

General Information - Panels (polyurethane rubber, rubber, foam, felt)

 

Selection details of panels (polyurethane rubber, rubber, foam, felt)

- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

- Thickness (mm): 0.5 to 50

- Width (mm): 3 to 500

- Length (mm): 10 to 2000

 

Description/Basics

Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

Additional properties on foam panels and rubber plates can be found in the Properties PDF.

MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.

 

Application Examples - Panels (polyurethane rubber, rubber, foam, felt)

Application example
(1) Low-friction rubber plate (2) belt conveyor

Application example
(1) Vibration damping plate

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
UNSEA5-80
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSGrade, Type With or w/o Adhesive Thickness T
(mm)
Width A
(mm)
Length B
(mm)
Hardness (Shore, Asker, Penetration) Specifications Hole Machining Counterbored Hole Nominal Dia. [Z] F
(mm)
G
(mm)
Through Hole Nominal Dia. [N]

43.15 €

1 Available 7 Days 10[Low Elasticity Rubber] HANENITE®GP-35LEAdhesive580500Shore A35Band TypeNo Drilling Alteration----

Loading...

  1. 1

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Low Elastic Rubber Sheets/Standard A/B Dimensions:Related Image
Open the technical drawing in the new window

Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)


■Accuracy Standards
T Tolerance
TTolerance
1~3±0.3
5, 10±0.4
15~30±0.5

A, B Tolerance
A, BTolerance
200 or Less±0.5
201~300±1.0
301~500±1.5

■Square Type
Part NumberA Selection
TypeT
No Adhesive
UNSE
UNLE
Adhesive
UNSEA
UNLEA
15250
20
30

■Band Type
Part NumberA Selection
TypeT
No Adhesive
UNSE
UNLE
Adhesive
UNSEA
UNLEA
13
5
10
20
30
40
50
80
100
2
3
5
10
L dimension is 500mm.

■A, B Configurable - Standard Type
Part Number1mm Increment
TypeTAB
No Adhesive
UNSET
UNLET


Adhesive
UNSETA
UNLETA
110~35010~350
2
3
5
10
1510~25010~250
20
30
A≥B≥T

■A, B Configurable - Hole Type
Part Number1mm Increment (A≥B≥T)0.5mm IncrementScrew Nominal Dia. Selection
TypeNominalTABFGN (Through Hole)Z (Counterbored Hole)
No Adhesive
UNSET
UNLET


Adhesive
UNSETA
UNLETA
1H

2H

3H

4H

6H
125~35025~3505~345
(1H Type)
9~341
(2H, 4H Types)
9~170
(3H, 6H Types)
5~345
(1H, 2H, 3H Types)

9~341
(4H, 6H Types)
3
4
5
6
8
10
-
2-
3-
5-
1034    
1525~25025~2509~241
(1H, 2H, 4H Types)
9~120
(3H, 6H Types)
5~245
(1H, 2H, 3H Types)
9~241
(4H, 6H Types)
 4568 
20 4568 
30 456810
A≥B≥T
Dimension F Specification Range: For 1H: d(d1)/2+2.5≤F≤A-d(d1)/2-2.5, for 2H, 4H: d(d1)+5≤F≤A-d(d1)-5, for 3H, 6H: d(d1)+5≤F≤A/2-d(d1)/2-2.5.
Dimension G Specification Range: For 1H, 2H, 3H: d(d1)/2+2.5≤G≤B-d(d1)/2-2.5, for 4H, 6H: d(d1)+5≤G≤B-d(d1)-5. (d for through holes, d1 for counterbored holes.)

 

Alterations - Panels (polyurethane rubber, rubber, foam, felt)

Low Elastic Rubber Sheets/Standard A/B Dimensions:Related Image

Basic information

Material Rubber

This page is Plates / HANENITE® / low elasticity / A35, A53 / through hole / adhesive layer , part number UNSEA5-80.
You can find the detail information about specifications and dimensions on part number UNSEA5-80.

Frequently Asked Questions (FAQ)

Question:

How can you attach a rubber plate?

Answer:

A rubber plate can be attached with double-adhesive tape. MISUMI offers rubber plates with configurable through holes or counterbores with adhesive tape.

Question:

Do you have screw-on rubber panels?

Answer:

MISUMI offers rubber plates that can be screwed on via a through hole or counterbore. The rubber plates with counterbores are well suited for applications that need to form a flat surface.

Question:

Is NBR oil-resistant?

Answer:

The NBR rubber is oil-resistant and is often used as a sealing material for rubber or foam. In addition, NBR has good thermal resistance, which in combination with high abrasion resistance is the best suited NBR material for seals.

Question:

Which material reduces vibrations well?

Answer:

Silicone gel vibration dampers reduce vibrations well. This elastic material reduces the transmission of vibrations to the subsequent component and also contributes to the acoustics.

Question:

What is Vulkollan?

Answer:

Vulkollan is a highly abrasion-resistant polyurethane rubber that has high wear resistance. It is one of the high-performance rubbers that has little pressure deformation and can withstand high impact forces. In addition, Vulkollan has a high tear strength. However, over time Vulkollan may change its colour, but without losing its mechanical properties.

Show more FAQ Close

Variation of this product

Part Number
UNLE1-10
UNLE1-100
UNLE1-20
UNLE1-3
UNLE1-30
UNLE1-40
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountStandard
Shipping Days
?
RoHSGrade, Type With or w/o Adhesive Thickness T
(mm)
Width A
(mm)
Length B
(mm)
Hardness (Shore, Asker, Penetration) Specifications Hole Machining Counterbored Hole Nominal Dia. [Z] F
(mm)
G
(mm)
Through Hole Nominal Dia. [N]

3.79 €

1 Available 7 Days 10[Low Elasticity Rubber] HANENITE®GP-60LENo Adhesive110500Shore A53Band TypeNo Drilling Alteration----

26.18 €

1 Available 7 Days 10[Low Elasticity Rubber] HANENITE®GP-60LENo Adhesive1100500Shore A53Band TypeNo Drilling Alteration----

6.33 €

1 Available 7 Days 10[Low Elasticity Rubber] HANENITE®GP-60LENo Adhesive120500Shore A53Band TypeNo Drilling Alteration----

2.90 €

1 Available 7 Days 10[Low Elasticity Rubber] HANENITE®GP-60LENo Adhesive13500Shore A53Band TypeNo Drilling Alteration----

8.72 €

1 Available 7 Days 10[Low Elasticity Rubber] HANENITE®GP-60LENo Adhesive130500Shore A53Band TypeNo Drilling Alteration----

11.26 €

1 Available 7 Days 10[Low Elasticity Rubber] HANENITE®GP-60LENo Adhesive140500Shore A53Band TypeNo Drilling Alteration----

Complementary Products

MISUMI Unit еxample related to this product

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360