Manufacturer part number: HTUN236S2M-60
Brand: MISUMI
Price: 5.30 €
Delivery time: 9 Days
Belt material: Polyurethane Belt
Core Wire Material: [Aramid] Aramid
Belt Type: S2M
Belt Width (mm): 6 mm
Circumference Length: 236 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
HTUN236S2M-60
Back to the Category Timing Belt
Available dimensions and tolerances can be found under the tab More information.
Type | Material | |
HTBN | Back Rubber | Chloroprene Rubber |
Tooth Rubber | ||
Core Wire | Fiberglass Cord S/Z Alternately Twisted Continuous | |
Tooth Fabric | Nylon Cloth | |
HTUN | Main Body | Polyurethane |
Core Wire | Aramid Fiber |
Further specifications can be found under the tab More information.
Part Number | ||||
Type | Belt Number | - | Belt Nominal Width | |
HTBN HTUN | 2800 S14M 225 S3M | - - | 400 100 |
- Material: chloroprene rubber (neoprene), polyurethane (PU)
- Tension cord: glass fibre, aramid fibre, steel
- Width (mm): 1 to 101.6
- Width (in.): 0.19 to 4
- Profile (metric): T5, T10, AT5, AT10, S2M, S3M, S5M, S8M, S14M, MTS8M, EV5GT, EV8YU, 2GT, 3GT, MA3, MA5, MA8, P2M, P3M, P5M, P8M, UP5M, UP8M
- Profile (in.): MXL, XL, L, H
Timing belts for mechanical engineering are intended for force and power transmission. Depending on the interlocking of the profile, they can alternatively be used for the material flow (transportation) or for positioning.
Timing belts are more maintenance-friendly, efficient and durable compared to roller chains.
Timing belts can be used in many ways. The belt profile that suits your application depends on the task of the timing belt. MISUMI offers a suitable belt profile for almost every type of application.
An overview of the profile forms by application type can be found in the PDF Overview.
The amount of transmission power depends on many factors. The exact maximum load must be considered and calculated individually according to the application. The calculation for timing belts can be found in the selection of Timing Belts as PDF.
In order not to fall below the minimum number of teeth, the minimum size of the timing pulleys should be considered individually.
In general, a timing belt should be provided with the appropriate pretension to maximize the service life of the timing belt. If the pretension is too low, a jump (slip) can cause wear of the timing belt.
Application example: workpiece carrier
(1) Stopper bolt with rubber, (2) belt conveyor, (3) workpiece carrier
Application example: of toothed belt drives
(1) Toothed belt, (2) driven Timing pulleys with crimp disc, (3) idler pulley with crimp disc, (4) driving Timing pulleys with crimp disc
Application example: Timing belt
(1) Linear guide, (2) mounting plate, (3) Timing belt, (4) Screw-on terminal
Application example: Timing belt
(1) Bolt-on terminal, (2) Timing belt, (3) Linear shaft, (4) Linear bushings
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
HTUN236S2M-60 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Belt material | Core Wire Material | Belt Type | Belt Width (mm) (mm) | Circumference Length (mm) | Number of Teeth (Teeth) | |
---|---|---|---|---|---|---|---|---|---|---|---|
5.30 € | 1 | Available | 9 Days | 10 | Polyurethane Belt | [Aramid] Aramid | S2M | 6 | 236 | 118 |
Loading...
Back to the Category Timing Belt
Type | Pitch | Ra | Lr | H | h | i | PLD | Unit Mass g/m (Width: 10mm) |
S2M | 2 | 1.3 | 1.3 | 1.36 | 0.76 | 0.6 | 0.254 | 13.0(11.0) |
S3M | 3 | 1.95 | 1.95 | 1.94 | 1.14 | 0.8 | 0.381 | 19.0(15.0) |
S5M | 5 | 3.25 | 3.25 | 3.41 | 1.91 | 1.5 | 0.480 | 34.0 |
S8M | 8 | 5.2 | 5.2 | 5.3 | 3.05 | 2.25 | 0.686 | 52.0 |
S14M | 14 | 9.1 | 9.1 | 10.2 | 5.3 | 4.9 | 1.397 | 100.0 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||||||
Type | Belt Number | Belt Nominal Width | HTBN | HTUN | ||||||
40 | 60 | 100 | 40 | 60 | 100 | |||||
HTBN (Rubber) HTUN (Polyurethane) | 76 S2M | 40 (4mm) 60 (6mm) 100 (10mm) | 38 | 76 | - | - | - | |||
78 S2M | 39 | 78 | ||||||||
80 S2M | 40 | 80 | ||||||||
88 S2M | 44 | 88 | - | - | - | |||||
90 S2M | 45 | 90 | ||||||||
100 S2M | 50 | 100 | ||||||||
112 S2M | 56 | 112 | ||||||||
116 S2M | 58 | 116 | - | - | - | |||||
118 S2M | 59 | 118 | ||||||||
122 S2M | 61 | 122 | ||||||||
124 S2M | 62 | 124 | ||||||||
126 S2M | 63 | 126 | - | |||||||
128 S2M | 64 | 128 | - | - | ||||||
130 S2M | 65 | 130 | ||||||||
132 S2M | 66 | 132 | ||||||||
134 S2M | 67 | 134 | ||||||||
138 S2M | 69 | 138 | ||||||||
140 S2M | 70 | 140 | ||||||||
142 S2M | 71 | 142 | - | - | - | |||||
144 S2M | 72 | 144 | ||||||||
152 S2M | 76 | 152 | - | - | - | |||||
160 S2M | 80 | 160 | ||||||||
164 S2M | 82 | 164 | ||||||||
166 S2M | 83 | 166 | ||||||||
172 S2M | 86 | 172 | ||||||||
176 S2M | 88 | 176 | - | - | - | |||||
180 S2M | 90 | 180 | ||||||||
186 S2M | 93 | 186 | - | - | - | |||||
190 S2M | 95 | 190 | ||||||||
194 S2M | 97 | 194 | ||||||||
200 S2M | 100 | 200 | ||||||||
204 S2M | 102 | 204 | - | - | - | |||||
210 S2M | 105 | 210 | ||||||||
212 S2M | 106 | 212 | ||||||||
214 S2M | 107 | 214 | - | - | - | |||||
218 S2M | 109 | 218 | - | - | - | |||||
220 S2M | 110 | 220 | ||||||||
224 S2M | 112 | 224 | ||||||||
230 S2M | 115 | 230 | ||||||||
234 S2M | 117 | 234 | - | - | - | |||||
236 S2M | 118 | 236 | ||||||||
240 S2M | 120 | 240 | - | - | - | |||||
242 S2M | 121 | 242 | ||||||||
244 S2M | 122 | 244 | ||||||||
246 S2M | 123 | 246 | ||||||||
250 S2M | 125 | 250 | ||||||||
256 S2M | 128 | 256 | - | - | - | |||||
260 S2M | 130 | 260 | - | - | - | |||||
266 S2M | 133 | 266 | - | - | - | |||||
280 S2M | 140 | 280 | ||||||||
290 S2M | 145 | 290 | ||||||||
300 S2M | 150 | 300 | - | - | - | |||||
320 S2M | 160 | 320 | ||||||||
324 S2M | 162 | 324 | - | - | - | |||||
328 S2M | 164 | 328 | ||||||||
330 S2M | 165 | 330 | ||||||||
340 S2M | 170 | 340 | - | - | - | |||||
360 S2M | 180 | 360 | ||||||||
370 S2M | 185 | 370 | ||||||||
380 S2M | 190 | 380 | - | - | - | |||||
396 S2M | 198 | 396 | - | - | - | |||||
400 S2M | 200 | 400 | - | - | - | |||||
436 S2M | 218 | 436 | ||||||||
448 S2M | 224 | 448 | ||||||||
486 S2M | 243 | 486 | - | - | - | |||||
488 S2M | 244 | 488 | ||||||||
500 S2M | 250 | 500 | - | - | - | |||||
520 S2M | 260 | 520 | ||||||||
560 S2M | 280 | 560 | ||||||||
572 S2M | 286 | 572 | - | |||||||
580 S2M | 290 | 580 | - | - | ||||||
600 S2M | 300 | 600 | - | - | - | |||||
630 S2M | 315 | 630 | ||||||||
710 S2M | 355 | 710 | - | - | - | |||||
800 S2M | 400 | 800 | ||||||||
900 S2M | 450 | 900 | - | - | - | |||||
984 S2M | 492 | 984 | ||||||||
1196 S2M | 598 | 1196 | ||||||||
1250 S2M | 625 | 1250 | ||||||||
1274 S2M | 637 | 1274 | ||||||||
1290 S2M | 645 | 1290 | - | - | - |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||||||
Type | Belt Number | Belt Nominal Width | HTBN | HTUN | ||||||
60 | 100 | 150 | 60 | 100 | 150 | |||||
HTBN (Rubber) HTUN (Polyurethane) | 120 S3M | 60 (6mm) 100 (10mm) 150 (15mm) | 40 | 120 | - | - | - | |||
123 S3M | 41 | 123 | - | |||||||
129 S3M | 43 | 129 | ||||||||
141 S3M | 47 | 141 | ||||||||
144 S3M | 48 | 144 | ||||||||
150 S3M | 50 | 150 | - | - | ||||||
162 S3M | 54 | 162 | ||||||||
171 S3M | 57 | 171 | - | - | - | |||||
174 S3M | 58 | 174 | ||||||||
177 S3M | 59 | 177 | ||||||||
180 S3M | 60 | 180 | ||||||||
186 S3M | 62 | 186 | ||||||||
189 S3M | 63 | 189 | - | - | - | - | ||||
192 S3M | 64 | 192 | ||||||||
195 S3M | 65 | 195 | - | - | ||||||
201 S3M | 67 | 201 | ||||||||
207 S3M | 69 | 207 | - | - | - | |||||
210 S3M | 70 | 210 | ||||||||
213 S3M | 71 | 213 | ||||||||
219 S3M | 73 | 219 | ||||||||
222 S3M | 74 | 222 | - | - | - | |||||
225 S3M | 75 | 225 | ||||||||
234 S3M | 78 | 234 | - | - | ||||||
237 S3M | 79 | 237 | ||||||||
246 S3M | 82 | 246 | ||||||||
249 S3M | 83 | 249 | - | - | - | |||||
252 S3M | 84 | 252 | ||||||||
255 S3M | 85 | 255 | ||||||||
264 S3M | 88 | 264 | ||||||||
273 S3M | 91 | 273 | - | - | - | |||||
276 S3M | 92 | 276 | ||||||||
279 S3M | 93 | 279 | - | - | - | |||||
285 S3M | 95 | 285 | ||||||||
288 S3M | 96 | 288 | ||||||||
291 S3M | 97 | 291 | ||||||||
300 S3M | 100 | 300 | ||||||||
312 S3M | 104 | 312 | ||||||||
318 S3M | 106 | 318 | ||||||||
327 S3M | 109 | 327 | - | - | - | |||||
339 S3M | 113 | 339 | - | - | - | |||||
345 S3M | 115 | 345 | ||||||||
354 S3M | 118 | 354 | - | - | - | |||||
360 S3M | 120 | 360 | - | - | - | |||||
363 S3M | 121 | 363 | ||||||||
369 S3M | 123 | 369 | ||||||||
375 S3M | 125 | 375 | ||||||||
384 S3M | 128 | 384 | - | - | - | |||||
387 S3M | 129 | 387 | ||||||||
396 S3M | 132 | 396 | - | - | - | |||||
402 S3M | 134 | 402 | - | - | - | |||||
405 S3M | 135 | 405 | ||||||||
408 S3M | 136 | 408 | ||||||||
420 S3M | 140 | 420 | ||||||||
423 S3M | 141 | 423 | - | - | - | |||||
432 S3M | 144 | 432 | ||||||||
453 S3M | 151 | 453 | ||||||||
456 S3M | 152 | 456 | - | - | - | |||||
459 S3M | 153 | 459 | ||||||||
474 S3M | 158 | 474 | ||||||||
480 S3M | 160 | 480 | - | - | - | |||||
483 S3M | 161 | 483 | ||||||||
486 S3M | 162 | 486 | - | - | - | |||||
501 S3M | 167 | 501 | ||||||||
507 S3M | 169 | 507 | - | - | - | |||||
519 S3M | 173 | 519 | ||||||||
525 S3M | 175 | 525 | - | - | - | |||||
537 S3M | 179 | 537 | ||||||||
540 S3M | 180 | 540 | ||||||||
564 S3M | 188 | 564 | - | - | - | |||||
591 S3M | 197 | 591 | ||||||||
600 S3M | 200 | 600 | ||||||||
612 S3M | 204 | 612 | - | - | - | |||||
633 S3M | 211 | 633 | ||||||||
645 S3M | 215 | 645 | ||||||||
660 S3M | 220 | 660 | - | - | - | |||||
681 S3M | 227 | 681 | - | - | - | |||||
741 S3M | 247 | 741 | ||||||||
750 S3M | 250 | 750 | ||||||||
804 S3M | 268 | 804 | - | - | - | |||||
810 S3M | 270 | 810 | ||||||||
852 S3M | 284 | 852 | ||||||||
900 S3M | 300 | 900 | ||||||||
918 S3M | 306 | 918 | ||||||||
1050 S3M | 350 | 1050 | ||||||||
1080 S3M | 360 | 1080 | - | - | - | |||||
1119 S3M | 373 | 1119 | ||||||||
1170 S3M | 390 | 1170 | ||||||||
1203 S3M | 401 | 1203 | ||||||||
1221 S3M | 407 | 1221 | ||||||||
1236 S3M | 412 | 1236 | ||||||||
1245 S3M | 415 | 1245 | ||||||||
1260 S3M | 420 | 1260 | ||||||||
1290 S3M | 430 | 1290 | ||||||||
1299 S3M | 433 | 1299 | - | - | - | |||||
1332 S3M | 444 | 1332 | ||||||||
1401 S3M | 467 | 1401 | ||||||||
1596 S3M | 532 | 1596 | ||||||||
1680 S3M | 560 | 1680 | ||||||||
1788 S3M | 596 | 1788 | ||||||||
2100 S3M | 700 | 2100 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | ||||
Type | Belt | Belt Nominal Width | HTBN | ||||
Number | 100 | 150 | 250 | ||||
HTBN (Rubber) | 225 S5M | 100 (10mm) 150 (15mm) 250 (25mm) | 45 | 225 | |||
230 S5M | 46 | 230 | |||||
255 S5M | 51 | 255 | |||||
260 S5M | 52 | 260 | |||||
295 S5M | 59 | 295 | |||||
300 S5M | 60 | 300 | |||||
305 S5M | 61 | 305 | |||||
320 S5M | 64 | 320 | |||||
325 S5M | 65 | 325 | |||||
340 S5M | 68 | 340 | |||||
350 S5M | 70 | 350 | |||||
360 S5M | 72 | 360 | |||||
370 S5M | 74 | 370 | |||||
375 S5M | 75 | 375 | |||||
380 S5M | 76 | 380 | |||||
390 S5M | 78 | 390 | |||||
400 S5M | 80 | 400 | |||||
415 S5M | 83 | 415 | |||||
425 S5M | 85 | 425 | |||||
435 S5M | 87 | 435 | |||||
440 S5M | 88 | 440 | |||||
450 S5M | 90 | 450 | |||||
475 S5M | 95 | 475 | |||||
490 S5M | 98 | 490 | |||||
500 S5M | 100 | 500 | |||||
520 S5M | 104 | 520 | |||||
525 S5M | 105 | 525 | |||||
530 S5M | 106 | 530 | |||||
545 S5M | 109 | 545 | |||||
550 S5M | 110 | 550 | |||||
560 S5M | 112 | 560 | |||||
575 S5M | 115 | 575 | |||||
590 S5M | 118 | 590 | |||||
595 S5M | 119 | 595 | |||||
600 S5M | 120 | 600 | |||||
625 S5M | 125 | 625 | |||||
640 S5M | 128 | 640 | |||||
650 S5M | 130 | 650 | |||||
665 S5M | 133 | 665 | |||||
670 S5M | 134 | 670 | |||||
675 S5M | 135 | 675 | |||||
690 S5M | 138 | 690 | |||||
695 S5M | 139 | 695 | |||||
700 S5M | 140 | 700 | |||||
710 S5M | 142 | 710 | |||||
720 S5M | 144 | 720 | |||||
725 S5M | 145 | 725 | |||||
730 S5M | 146 | 730 | |||||
740 S5M | 148 | 740 | |||||
750 S5M | 150 | 750 | |||||
765 S5M | 153 | 765 | |||||
780 S5M | 156 | 780 | |||||
800 S5M | 160 | 800 | |||||
810 S5M | 162 | 810 | |||||
830 S5M | 166 | 830 | |||||
845 S5M | 169 | 845 | |||||
850 S5M | 170 | 850 | |||||
870 S5M | 174 | 870 | |||||
890 S5M | 178 | 890 | |||||
900 S5M | 180 | 900 | |||||
930 S5M | 186 | 930 | |||||
950 S5M | 190 | 950 | |||||
975 S5M | 195 | 975 | |||||
1000 S5M | 200 | 1000 | |||||
1025 S5M | 205 | 1025 | |||||
1050 S5M | 210 | 1050 | |||||
1055 S5M | 211 | 1055 | |||||
1085 S5M | 217 | 1085 | |||||
1090 S5M | 218 | 1090 | |||||
1100 S5M | 220 | 1100 | |||||
1105 S5M | 221 | 1105 | - | ||||
1115 S5M | 223 | 1115 | |||||
1120 S5M | 224 | 1120 | |||||
1125 S5M | 225 | 1125 | |||||
1135 S5M | 227 | 1135 | |||||
1145 S5M | 229 | 1145 | |||||
1160 S5M | 232 | 1160 | |||||
1165 S5M | 233 | 1165 | |||||
1195 S5M | 239 | 1195 | |||||
1225 S5M | 245 | 1225 | |||||
1250 S5M | 250 | 1250 | |||||
1270 S5M | 254 | 1270 | |||||
1295 S5M | 259 | 1295 | |||||
1350 S5M | 270 | 1350 | |||||
1420 S5M | 284 | 1420 | |||||
1475 S5M | 295 | 1475 | |||||
1500 S5M | 300 | 1500 | |||||
1505 S5M | 301 | 1505 | |||||
1530 S5M | 306 | 1530 | |||||
1595 S5M | 319 | 1595 | |||||
1605 S5M | 321 | 1605 | |||||
1680 S5M | 336 | 1680 | |||||
1715 S5M | 343 | 1715 | |||||
1800 S5M | 360 | 1800 | |||||
2000 S5M | 400 | 2000 | |||||
2145 S5M | 429 | 2145 | |||||
2255 S5M | 451 | 2255 | |||||
2480 S5M | 496 | 2480 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||||
Type | Belt Number | Belt Nominal Width | HTBN | |||||
150 | 250 | 300 | 400 | |||||
HTBN (Rubber) | 480 S8M | 150 (15mm) 250 (25mm) 300 (30mm) 400 (40mm) | 60 | 480 | ||||
520 S8M | 65 | 520 | ||||||
560 S8M | 70 | 560 | ||||||
584 S8M | 73 | 584 | ||||||
600 S8M | 75 | 600 | ||||||
632 S8M | 79 | 632 | ||||||
656 S8M | 82 | 656 | ||||||
712 S8M | 89 | 712 | ||||||
720 S8M | 90 | 720 | ||||||
760 S8M | 95 | 760 | ||||||
800 S8M | 100 | 800 | ||||||
824 S8M | 103 | 824 | ||||||
848 S8M | 106 | 848 | ||||||
880 S8M | 110 | 880 | ||||||
896 S8M | 112 | 896 | ||||||
920 S8M | 115 | 920 | ||||||
944 S8M | 118 | 944 | ||||||
960 S8M | 120 | 960 | ||||||
976 S8M | 122 | 976 | ||||||
1000 S8M | 125 | 1000 | ||||||
1040 S8M | 130 | 1040 | ||||||
1056 S8M | 132 | 1056 | ||||||
1080 S8M | 135 | 1080 | ||||||
1120 S8M | 140 | 1120 | ||||||
1136 S8M | 142 | 1136 | ||||||
1160 S8M | 145 | 1160 | ||||||
1200 S8M | 150 | 1200 | ||||||
1248 S8M | 156 | 1248 | ||||||
1280 S8M | 160 | 1280 | ||||||
1304 S8M | 163 | 1304 | ||||||
1360 S8M | 170 | 1360 | ||||||
1400 S8M | 175 | 1400 | ||||||
1440 S8M | 180 | 1440 | ||||||
1480 S8M | 185 | 1480 | ||||||
1520 S8M | 190 | 1520 | ||||||
1600 S8M | 200 | 1600 | ||||||
1680 S8M | 210 | 1680 | ||||||
1760 S8M | 220 | 1760 | ||||||
1800 S8M | 225 | 1800 | ||||||
1912 S8M | 239 | 1912 | ||||||
2000 S8M | 250 | 2000 | ||||||
2240 S8M | 280 | 2240 | ||||||
2304 S8M | 288 | 2304 | ||||||
2400 S8M | 300 | 2400 | ||||||
2496 S8M | 312 | 2496 | ||||||
2600 S8M | 325 | 2600 | ||||||
2800 S8M | 350 | 2800 | ||||||
3200 S8M | 400 | 3200 | ||||||
3680 S8M | 460 | 3680 | ||||||
4400 S8M | 550 | 4400 |
Part Number | Number of Teeth | Belt Circumference Length (mm) | Unit Price | |||
Type | Belt Number | Belt Nominal Width | HTBN | |||
400 | 600 | |||||
HTBN (Rubber) | 1008 S14M | 400 (40mm) 600 (60mm) | 72 | 1008 | ||
1120 S14M | 80 | 1120 | ||||
1190 S14M | 85 | 1190 | ||||
1246 S14M | 89 | 1246 | ||||
1400 S14M | 100 | 1400 | ||||
1540 S14M | 110 | 1540 | ||||
1610 S14M | 115 | 1610 | ||||
1652 S14M | 118 | 1652 | ||||
1778 S14M | 127 | 1778 | ||||
1806 S14M | 129 | 1806 | ||||
1890 S14M | 135 | 1890 | ||||
2100 S14M | 150 | 2100 | ||||
2310 S14M | 165 | 2310 | ||||
2450 S14M | 175 | 2450 | ||||
2590 S14M | 185 | 2590 | ||||
2660 S14M | 190 | 2660 | ||||
2800 S14M | 200 | 2800 | ||||
3500 S14M | 250 | 3500 | ||||
3850 S14M | 275 | 3850 | ||||
4508 S14M | 322 | 4508 | ||||
5012 S14M | 358 | 5012 |
Belt shape | Closed End | Belt tooth surface | Standard (Single Sided) | Belt-shaped type | Round Tooth Profile Super Torque |
---|---|---|---|---|---|
Transmission torque | High Torque Transmission |
This page is Timing belts / S#M / PUR, CR / glass fibre, aramid, steel, part number HTUN236S2M-60.
You can find the detail information about specifications and dimensions on part number HTUN236S2M-60.
Configure
Basic Attributes
Type
Belt material
Core Wire Material
Belt Type
Belt Width (mm)(mm)
Circumference Length(mm)
Number of Teeth(Teeth)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes
Where does the idler pulleys have to be placed on the timing belt?
As a rule, the idler pulleys are positioned on the slack side, since the tension of the timing belt is here lowest during operation. Ideally, the timing belt is tensioned from the inside, because this prevents the timing belt from bending alternately. This is particularly recommended for timing belts with a steel tension cord. The idler pulley should always be larger than the smallest timing pulley of the belt drive system.
For what purpose can a timing belt with a round profile be used for?
Round profile timing belts can be used in many applications. These are well suited for transmitting torque. In addition, the reverse play is very low due to the round profile shape with changing direction of rotation. The timing belts are also well suited for highly precise positioning. Timing belts with a round tooth profile can therefore often be found in 3D printers.
Can multiple belts be used for the transfer?
A transmission can take place via one or more timing belts. If an equal distribution of the forces across the individual belts is not possible, it must be ensured that one belt alone can withstand the maximum load. In order to enable uniform distribution of forces, a precise adjustment is necessary. For this purpose, a toothed belt disc with clamping sleeve can be used, because it can be adjusted continuously and ensure uniform distribution.
Can a timing belt used for transmission?
With timing belts, a gear ratio or reduction in a drive is possible. The gear ratio is established based on the number of teeth on the pulleys. It should be ensured that the minimum number of teeth of the timing pulley disc is not undercut.
What is the possible tensile stress for timing belts?
The maximum allowable tension for MISUMI timing belts depends on the belt type, speed of rotation and belt pulley diameter. For more information, click on this link.
What is the minimum size of timing pulleys?
The minimum size or the minimum number of teeth of a timing pulley depends on the belt type used and the height of the applied speed or rotation. You can find more detailed information about the minimum number of teeth of timing pulley discs in the selection of Timing Pulleys available as a PDF.
Does a timing belt stretch a lot?
As opposed to a roller chain, the expansion is small. The length extension of timing belts is very stable. Therefore, it is not absolutely necessary to re-tension the timing belt during operation, as is necessary for chain drives. This makes the timing belt very easy to maintain compared to the chain. However, it should be ensured that the timing belt is free of oil, as the natural rubber could swell.
What is the purpose of a timing belt?
The primary task of a timing belt is the synchronous and slip-free transmission of force or power. Depending on the task, various profile shapes are available for timing belts. These can be roughly divided into drive, conveying and positioning. In the following overview, you can view the various areas of use: Overview as PDF
Part Number |
---|
HTBN1000S8M-150 |
HTBN1000S8M-250 |
HTBN1000S8M-300 |
HTUN240S2M-100 |
HTUN240S2M-40 |
HTUN240S2M-60 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Belt material | Core Wire Material | Belt Type | Belt Width (mm) (mm) | Circumference Length (mm) | Number of Teeth (Teeth) |
---|---|---|---|---|---|---|---|---|---|---|---|
34.79 € | 1 | Available | 7 Days | 10 | Rubber Belt | [Glass Fiber] Glass Fiber | S8M | 15 | 1000 | 125 | |
58.08 € | 1 | Available | 7 Days | 10 | Rubber Belt | [Glass Fiber] Glass Fiber | S8M | 25 | 1000 | 125 | |
71.10 € | 1 | Available | 7 Days | 10 | Rubber Belt | [Glass Fiber] Glass Fiber | S8M | 30 | 1000 | 125 | |
7.21 € | 1 | Available | 9 Days | 10 | Polyurethane Belt | [Aramid] Aramid | S2M | 10 | 240 | 120 | |
4.43 € | 1 | Available | 9 Days | 10 | Polyurethane Belt | [Aramid] Aramid | S2M | 4 | 240 | 120 | |
5.30 € | 1 | Available | 43 Days | 10 | Polyurethane Belt | [Aramid] Aramid | S2M | 6 | 240 | 120 |