TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
- TS
- General Steel
- 2 Flutes
- B (Stub)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Days | 6 | 0.5 | 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 6 | 1 | 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 6 | 1.5 | 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 6 | 2 | 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 8 | 0.5 | 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 8 | 1 | 12 | 60 | 8 | 17 ～ 30 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 8 | 1.5 | 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 8 | 2 | 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 10 | 0.5 | 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 10 | 0.7 | 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 10 | 1 | 15 | 70 | 10 | 20 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 10 | 2 | 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 10 | 3 | 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 12 | 0.7 | 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 12 | 1 | 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 12 | 2 | 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Days | 12 | 3 | 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 7 Days | 6 | 0.5 | 5 ～ 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 6 | 1 | 5 ～ 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 6 | 1.5 | 5 ～ 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 6 | 2 | 5 ～ 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 8 | 0.5 | 5 ～ 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 8 | 1 | 5 ～ 12 | 60 | 8 | 17 ～ 30 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 8 | 1.5 | 5 ～ 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 8 | 2 | 5 ～ 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 10 | 0.5 | 5 ～ 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 10 | 0.7 | 5 ～ 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 10 | 1 | 5 ～ 15 | 70 | 10 | 20 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 10 | 2 | 5 ～ 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 10 | 3 | 5 ～ 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 12 | 0.7 | 5 ～ 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 12 | 1 | 5 ～ 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 12 | 2 | 5 ～ 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Days | 12 | 3 | 5 ～ 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
33.90 € | 1 | Available | 5 Days | 1 | 0.1 | 1.5 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
32.93 € | 1 | Available | 5 Days | 1 | 0.2 | 1.5 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
32.93 € | 1 | Available | 5 Days | 1.5 | 0.2 | 2.25 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
35.91 € | 1 | Available | 5 Days | 2 | 0.1 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
34.92 € | 1 | Available | 5 Days | 2 | 0.2 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
34.92 € | 1 | Available | 5 Days | 2 | 0.3 | 3 | 40 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.55 € | 1 | Available | 5 Days | 3 | 0.3 | 4.5 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.55 € | 1 | Available | 5 Days | 3 | 0.5 | 4.5 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.55 € | 1 | Available | 5 Days | 4 | 0.5 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.72 € | 1 | Available | 5 Days | 4 | 0.8 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.55 € | 1 | Available | 5 Days | 5 | 0.5 | 7.5 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
41.85 € | 1 | Available | 5 Days | 6 | 0.5 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
42.13 € | 1 | Available | 5 Days | 6 | 1 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
42.56 € | 1 | Available | 5 Days | 6 | 1.5 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
42.56 € | 1 | Available | 5 Days | 6 | 2 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
57.78 € | 1 | Available | 5 Days | 8 | 0.5 | 12 | 60 | 8 | - | ±0.01 | Stocked Product | 2 | |
57.37 € | 1 | Available | 5 Days | 8 | 1 | 12 | 60 | 8 | - | ±0.01 | Stocked Product | 2 | |
57.78 € | 1 | Available | 5 Days | 8 | 1.5 | 12 | 60 | 8 | - | ±0.01 | Stocked Product | 2 | |
56.90 € | 1 | Available | 5 Days | 8 | 2 | 12 | 60 | 8 | - | ±0.01 | Stocked Product | 2 | |
81.53 € | 1 | Available | 5 Days | 10 | 0.5 | 15 | 70 | 10 | - | ±0.01 | Stocked Product | 2 | |
81.83 € | 1 | Available | 5 Days | 10 | 0.7 | 15 | 70 | 10 | - | ±0.01 | Stocked Product | 2 | |
82.24 € | 1 | Available | 5 Days | 10 | 1 | 15 | 70 | 10 | - | ±0.01 | Stocked Product | 2 | |
82.24 € | 1 | Available | 5 Days | 10 | 2 | 15 | 70 | 10 | - | ±0.01 | Stocked Product | 2 | |
82.24 € | 1 | Available | 5 Days | 10 | 3 | 15 | 70 | 10 | - | ±0.01 | Stocked Product | 2 | |
98.43 € | 1 | Available | 5 Days | 12 | 0.7 | 18 | 75 | 12 | - | ±0.01 | Stocked Product | 2 | |
99.26 € | 1 | Available | 5 Days | 12 | 1 | 18 | 75 | 12 | - | ±0.01 | Stocked Product | 2 |
Loading...
Specifications
Model Number
TSC-CR-EM2B
| Outer Diameter D |
Radius R | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
|||||||||
| 1 | 0.1 | 0.2 | 1.5 | 40 | 4 | 1 | ● | ||||||||
| 1.5 | 0.2 | 2.25 | 40 | 4 | 1 | ● | |||||||||
| 2 | 0.1 | 0.2 | 0.3 | 3 | 40 | 4 | 1 | ● | |||||||
| 3 | 0.3 | 0.5 | 4.5 | 45 | 6 | 1 | ● | ||||||||
| 0.1 ~ 0.7 | □ | ||||||||||||||
| 3.5 | 0.1 ~ 0.7 | 5.25 | 40 | 6 | 1 | □ | |||||||||
| 4 | 0.5 | 0.8 | 6 | 45 | 6 | 1 | ● | ||||||||
| 0.1 ~ 1.0 | □ | ||||||||||||||
| 4.5 | 0.1 ~ 1.2 | 6.75 | 45 | 6 | 1 | □ | |||||||||
| 5 | 0.5 | 7.5 | 45 | 6 | 1 | ● | |||||||||
| 0.1 ~ 1.5 | □ | ||||||||||||||
| 5.5 | 0.1 ~ 1.7 | 8.25 | 45 | 6 | 1 | □ | |||||||||
| 6 | 0.5 | 1 | 1.5 | 2 | 9 | 45 | 6 | 2 | ● | ||||||
| 0.1 ~ 1.9 | □ | ||||||||||||||
| 8 | 0.5 | 1 | 1.5 | 2 | 12 | 60 | 8 | 2 | ● | ||||||
| 0.1 ~ 3.0 | □ | ||||||||||||||
| 10 | 0.5 | 0.7 | 1 | 2 | 3 | 15 | 70 | 10 | 2 | ● | |||||
| 0.1 ~ 2.9 | □ | ||||||||||||||
| 12 | 0.5 | 0.7 | 1 | 2 | 3 | 18 | 75 | 12 | 2 | ● | |||||
| 0.1 ~ 2.9 | □ | ||||||||||||||
| 16 | 0.1 ~ 3.0 | 24 | 100 | 16 | 2 | □ | |||||||||
| 20 | 0.1 ~ 3.0 | 30 | 100 | 20 | 2 | □ | |||||||||
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 2-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Type
- SN-TSC-CR-EM2B
- SNR-TSC-CR-EM2B
- TSC-CR-EM2B
-
R Precision(μm)
Filter by standard shipping days
-
- All
- 5 Days or Less
- 7 Days or Less
- 8 Days or Less
- 13 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.