Surface Processing Cutter DoPent TEN09
Screw clamp surface processing cutter
[Features]
· Cutting edge angle: 70°
· Uses pentagonal double-sided inserts
[Features]
· Cutting edge angle: 70°
· Uses pentagonal double-sided inserts
(i)Remark
- · "3D-Light" data is applied during normal customer use, such as interference checks.
- · "3D-Detail" is applied when the customer creates 3-dimensional data such as tooling charts.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TEN09R125M38.1-10
Outline Drawing
DOPENT Cutter, Bore Type (Right-Handed), TEN Type
Dimensional drawing
Arbor type A
Arbor type B
Arbor type C
| Model No. | Weight (kg) | Arbor Type |
|---|---|---|
| TEN09R050M22.0-03 | 0.3 | A |
| TEN09R050M22.0-04 | 0.3 | A |
| TEN09R050M22.0-06 | 0.3 | A |
| TEN09R063M22.0-04 | 0.5 | A |
| TEN09R063M22.0-06 | 0.5 | A |
| TEN09R063M22.0-08 | 0.5 | A |
| TEN09R080M25.4-04 | 0.9 | A |
| TEN09R080M25.4-07 | 0.9 | A |
| TEN09R080M25.4-10 | 0.9 | A |
| TEN09R100M31.7-05 | 1.3 | B |
| TEN09R100M31.7-08 | 1.3 | B |
| TEN09R100M31.7-12 | 1.4 | B |
| TEN09R125M38.1-06 | 2.6 | B |
| TEN09R125M38.1-10 | 2.7 | B |
| TEN09R125M38.1-16 | 2.9 | B |
| TEN09R160M50.8-07 | 4.4 | B |
| TEN09R160M50.8-12 | 4.6 | B |
| TEN09R160M50.8-20 | 4.9 | B |
Related Products
Double-Sided Pentagon Type, 10-Corner Insert. Provides high-feed, high-efficiency machining.
Standard ring gauge for zero-point adjustments. Measuring surface comes with a cemented carbide tip.
"Excalibur" Water-Soluble Cutting/Grinding Fluid
Extends tool life and does not need to be replaced every 2 years. A must-have to improve machining efficiency.
Basic information
| Machining Application | Plane | blade diameter D(mm) | 125 | work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper |
|---|---|---|---|---|---|
| Mounting Method | Arbor | Overall length (L)(mm) | 63 | Number of flutes(sheet) | 10 |
| Compatible Tip Material | Carbide Coat | Maximum Cutting Depth (Ad)(mm) | 6.4 | Underneck length (ℓ1)(mm) | 63 |
| Air Hole | Available | Dimensions φD(mm) | 38.1 | Dimensions φd1(mm) | 131 |
| Dimension L(mm) | 38 | Dimension B(mm) | 10 | Dimension A(mm) | 15.9 |
| Dimensions φDb(mm) | 80 | Specifications | Multi-edged | Driver | Grip H-TBS$Torx Bit BT15M |
| Cutter Tightening Bolt | TMBA-M20H | Wrench | Torx Bit BT15M/Grip H-TBS |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.