HS-401 Hot Tweezers (Part Numbers)

[Features]
· Mirror with high reflectance that broadly covers the ultraviolet or infrared ranges in addition to the visible range.
· It can be used for spectroscopic experiments including invisible light and propagation of black body radiation spectrum.
· Higher reflectance than metal film mirrors can be obtained even in ultraviolet and infrared areas.
· As a dielectric multilayer mirror, its mirror surface is not easily scratched and can be cleaned.
· Because the film is not absorbent, it does not change over time and can withstand continuous laser irradiation.
· A surface accuracy guaranteed mirror (HTFM) that guarantees its surface accuracy after coating is also available.
· * Reflection wavelength characteristics may vary depending on the polarization state of incident beams for dielectric multi-layer film.
· * P polarization has lower reflectance and a narrower reflection band than S polarization.
· * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
· * Mirror surface has metallic gloss, but does not use metal.
· * Be careful to avoid confusion with metal film mirrors.
[Product Specifications]
· [ Common Specifications]
· Material: BK7
· Coating: Dielectric Multilayer Film
· Incidence Angle: 45° ±3°
· Substrate Surface Accuracy: λ/10
· Parallelism: < 3'
· Scratch-Dig: 40-20
· Effective Diameter: 90% of External Diameter
· Rear Surface: Polished Surface
· [Individual Specifications]
· Compatible Wavelength: 400 to 2,000 nm
· Outer diameter φD: φ50 mm
· Thickness t: 8 mm
· Reflectivity: > 98% on Average
· Laser Yield Strength*: 0.5 J/cm2
· * Laser Pulse Width 10 ns, Wavelength 532 nm, Repetition Frequency 20 Hz