KYOCERA Grooving / Cutting Off Holders

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 14 Days or Less

?* Information on days to ship and prices

Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

KYOCERA

Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

Starting from^∗ ：	19.09 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Punching Blade KTKB-S Type

KYOCERA

P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

Starting from^∗ ：	113.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lathe Turning / Cutting Holder KGD Model (Combination)

KYOCERA

If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

Starting from^∗ ：	125.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Lathe Turning (Cutter) Bit GDM Model

KYOCERA

Conventional insert mounting to new holders is not recommended.

Starting from^∗ ：	15.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

KYOCERA

If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.

Starting from^∗ ：	127.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)

KYOCERA

Starting from^∗ ：	19.72 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Grooved End Face Blade KGDF Type

KYOCERA

[Features] Machining applications: Flanges, blind holes; compatible insert shape: non-ISO standard; clamping method: non-ISO standard.

Starting from^∗ ：	116.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Cutter Holder TKN Type

KYOCERA

P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

Starting from^∗ ：	13.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Kyocera Mill Routing Tip Holder

KYOCERA

[Features]
· KGD-S type: Realizes high efficiency machining thanks to the excellent chip discharge performance and high rigidity holder.
[Applications]
· Holder for Grooving and Cutting Off

Starting from^∗ ：	155.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

KGDS-S Type Blade for Grooving / Plunging

KYOCERA

[Features] Machining applications: Grooving / parting off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

Starting from^∗ ：	115.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Slit Tip GDM Type

KYOCERA

When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

Starting from^∗ ：	19.72 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tool Block for Holding Blade, KTKTB Type (Split Type)

KYOCERA

[Features]
A split tool block to hold a Kyocera blade.
[Features]
For fixing blades.

Starting from^∗ ：	247.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lathe Turning / Cutting (Multi-Function) Bit GMM Model

KYOCERA

Machinable groove depth is limited depending on workpiece diameter.

Starting from^∗ ：	16.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Functional / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Sliding Grooving Holder KIGM-8 Type (Blade Width 8 mm Tip Use / Large Inner Diameter Deep Grooving)

KYOCERA

Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

Starting from^∗ ：	476.05 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type

KYOCERA

[Features] Compatible insert type: Non-ISO standard; Clamping method: Non-ISO standard; Clamping method: Non-ISO standard.

Starting from^∗ ：	218.99 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lathe Turning / Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)

KYOCERA

[Features] Machining applications: Grooving / parting off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

Starting from^∗ ：	126.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

KYOCERA

[Features] Machining applications: Grooving; Holder angle (°): 90; Lubrication hole (oil hole): yes; Screw clamp allows good chip evacuation.

Starting from^∗ ：	144.07 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tool Block for Holding Blade, KTKTBF Type (Split Type / Perpendicular Type)

KYOCERA

KTKTBF type blade holding tool block from Tsukkiru.
[Compatible blade]KTKB/KFTB32

Starting from^∗ ：	216.96 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Outer Diameter Shallow Groove Holder KGBA Type

KYOCERA

[Features] This is a lever lock type holder that can be used for shallow recesses on outer diameters.

Starting from^∗ ：	118.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type

KYOCERA

One clamp for shallow grooving with outer diameter.
[shank material]Steel

Starting from^∗ ：	104.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lathe Turning (Cutter) Bit GDG Model

KYOCERA

Conventional insert mounting to new holders is not recommended.

Starting from^∗ ：	22.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lathe Turning (Cutter) Holder KGD Model (for Combination / Automatic Type)

KYOCERA

If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

Starting from^∗ ：	119.59 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving and End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

KYOCERA

A holder for the multifunctional tool "TAKINOL" series.
For grooving outside diameters with undercut.

Starting from^∗ ：	158.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip

KYOCERA

[Features] It uses carbide and cermet materials, and some are CVD and PVD coated.

Starting from^∗ ：	18.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Inner Diameter Groove SIGE Type Compatible Chip

KYOCERA

B dimension: Indicates machinable groove depth.

Starting from^∗ ：	24.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve

KYOCERA

[Features] No cutting direction; Lubrication hole (oil hole): yes; Compatible sleeve: It can be used in combination with a holder to change the tool runout.

Starting from^∗ ：	139.23 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Small Bore Slotting Holder [for GV Tip]

KYOCERA

Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

Starting from^∗ ：	184.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Inner Diameter Shallow Groove Holder KIGBA Type

KYOCERA

[Features] Machining applications: Grooving; Holder angle (°): 90; Type: Integrated.

Starting from^∗ ：	221.20 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

KGDF Type End Face Grooving GDFM / GDFMS Types

KYOCERA

Use a DM breaker for deep grooves when cutting chip processing is not stable during grooving with a general purpose GM breaker.

Starting from^∗ ：	11.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Slit Tip (For Small Diameters) TKF Type

KYOCERA

[Features]
· Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.

Starting from^∗ ：	30.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Slit Tip GDMS Type

KYOCERA

When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

Starting from^∗ ：	14.78 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Slit Tip GMM Type

KYOCERA

A breaker developed for cutting off, where the sharpness of an automatic lathe or similar is required. Drastically reduces remaining center part.

Starting from^∗ ：	20.37 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Cutter Holder TKR / L Type

KYOCERA

P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

Starting from^∗ ：	13.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Kyocera, Grooving Holder, KFMS Type

KYOCERA

[Features] KFMS type: It is a multifunctional tool. [Features] Multifunctional, holder for flange grooves.

Starting from^∗ ：	224.14 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Outer Diameter Shallow Groove Holder KGBAS Type

KYOCERA

One holder with lever lock for flat punctures on outer diameters.
[Shaft material]Steel.

Starting from^∗ ：	128.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGBS Type

KYOCERA

A clamp for shallow grooves on the outside diameter.
[Shank material]Steel

Starting from^∗ ：	128.66 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lathe Turning (Cutter) Bit GDMS Model

KYOCERA

Conventional insert mounting to new holders is not recommended.

Starting from^∗ ：	12.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)

KYOCERA

If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

Starting from^∗ ：	171.54 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Lathe Turning / Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)

KYOCERA

[Features] Machining applications: Grooving / parting off; holder angle (°): 90; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS.

Starting from^∗ ：	118.38 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

KYOCERA

Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

Starting from^∗ ：	25.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type

KYOCERA

Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

Starting from^∗ ：	57.89 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Multi-Functional / Grooving (Cutting-Off) Chip FGG Type

KYOCERA

Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

Starting from^∗ ：	36.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lathe Turning / Cutting (Multi-Function) Bit GMN Model

KYOCERA

Machinable groove depth is limited depending on workpiece diameter.

Starting from^∗ ：	13.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lathe Turning / Cutting (Multi-Function) Bit GMM / GMN Model

KYOCERA

Machinable groove depth is limited depending on workpiece diameter.

Starting from^∗ ：	13.52 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Multi-Functional / Grooving Holder KGM Type (for Automatic Board)

KYOCERA

4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

Starting from^∗ ：	102.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Application
Groove Width(mm)
Maximum Machining Diameter(mm)
Maximum Groove Depth(mm)
Cutting Direction
Number of corners for tip use
Shank height(mm)

				Promotional pricing ends 30/11/2024
Brand	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product Series	Multi-Functional / Grooving (Cutting-Off) Chip GMM Type	Punching Blade KTKB-S Type	Lathe Turning / Cutting Holder KGD Model (Combination)	Lathe Turning (Cutter) Bit GDM Model	Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Grooved End Face Blade KGDF Type	Cutter Holder TKN Type	Kyocera Mill Routing Tip Holder	KGDS-S Type Blade for Grooving / Plunging	Slit Tip GDM Type	Tool Block for Holding Blade, KTKTB Type (Split Type)	Lathe Turning / Cutting (Multi-Function) Bit GMM Model	Multi-Functional / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Sliding Grooving Holder KIGM-8 Type (Blade Width 8 mm Tip Use / Large Inner Diameter Deep Grooving)	Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type	Lathe Turning / Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	Tool Block for Holding Blade, KTKTBF Type (Split Type / Perpendicular Type)	Outer Diameter Shallow Groove Holder KGBA Type	Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type	Lathe Turning (Cutter) Bit GDG Model	Lathe Turning (Cutter) Holder KGD Model (for Combination / Automatic Type)	Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving and End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)	Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip	Inner Diameter Groove SIGE Type Compatible Chip	Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve	Small Bore Slotting Holder [for GV Tip]	Inner Diameter Shallow Groove Holder KIGBA Type	KGDF Type End Face Grooving GDFM / GDFMS Types	Slit Tip (For Small Diameters) TKF Type	Slit Tip GDMS Type	Slit Tip GMM Type	Cutter Holder TKR / L Type	Kyocera, Grooving Holder, KFMS Type	Outer Diameter Shallow Groove Holder KGBAS Type	Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGBS Type	Lathe Turning (Cutter) Bit GDMS Model	Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)	Lathe Turning / Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)	Multi-Functional / Grooving (Cutting-Off) Chip GMG Type	Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type	Multi-Functional / Grooving (Cutting-Off) Chip FGG Type	Lathe Turning / Cutting (Multi-Function) Bit GMN Model	Lathe Turning / Cutting (Multi-Function) Bit GMM / GMN Model	Multi-Functional / Grooving Holder KGM Type (for Automatic Board)
Starting from^∗	19.09 € *Unit price with basic configuration	113.24 € *Unit price with basic configuration	125.47 € *Unit price with basic configuration	15.30 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024	127.36 € *Unit price with basic configuration	19.72 € *Unit price with basic configuration	116.67 € *Unit price with basic configuration	13.52 € *Unit price with basic configuration	155.37 € *Unit price with basic configuration	115.17 € *Unit price with basic configuration	19.72 € *Unit price with basic configuration	247.81 € *Unit price with basic configuration	16.04 € *Unit price with basic configuration	476.05 € *Unit price with basic configuration	218.99 € *Unit price with basic configuration	126.73 € *Unit price with basic configuration	144.07 € *Unit price with basic configuration	216.96 € *Unit price with basic configuration	118.37 € *Unit price with basic configuration	104.15 € *Unit price with basic configuration	22.35 € *Unit price with basic configuration	119.59 € *Unit price with basic configuration	158.76 € *Unit price with basic configuration	18.46 € *Unit price with basic configuration	24.99 € *Unit price with basic configuration	139.23 € *Unit price with basic configuration	184.47 € *Unit price with basic configuration	221.20 € *Unit price with basic configuration	11.42 € *Unit price with basic configuration	30.44 € *Unit price with basic configuration	14.78 € *Unit price with basic configuration	20.37 € *Unit price with basic configuration	13.52 € *Unit price with basic configuration	224.14 € *Unit price with basic configuration	128.66 € *Unit price with basic configuration	128.66 € *Unit price with basic configuration	12.36 € *Unit price with basic configuration	171.54 € *Unit price with basic configuration	118.38 € *Unit price with basic configuration	25.82 € *Unit price with basic configuration	57.89 € *Unit price with basic configuration	36.34 € *Unit price with basic configuration	13.52 € *Unit price with basic configuration	13.52 € *Unit price with basic configuration	102.92 € *Unit price with basic configuration
Min. Shipping Days ：	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	8 Days	6 Days	6 Days	8 Days	6 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	7 Days	6 Days	8 Days	6 Days	6 Days	6 Days	7 Days	6 Days	9 Days	6 Days	8 Days	6 Days	9 Days	9 Days	6 Days	8 Days	6 Days	6 Days	8 Days	6 Days
Application	-	-	-	-	-	-	-	-	Cutting off	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Edge surface grooving	-	-	-	-	-	-	-	-	-	-	-
Groove Width(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Groove Depth(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Cutting Direction	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	-	-	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	-	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand
Number of corners for tip use	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank height(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
Clear

Groove Width(mm)
0.30 to 3.00

0.5-3.18

0.50 to 2.00

0.7-2.0

1.00 to 2.00

1.00 to 2.49

1.45 to 3.00

1.5

1.50 to 2.00

1.75 to 2.00

2

2.0 to 2.5

2.00 to 3.49

2.5

2.50 to 3.00

2.65

3

3.00 to 3.50

3.17

3.50 to 5.50

4

4.00 to 5.90

4.75

5

5(6)

6

6.00 to 7.90

6.35

8

8.00 to 9.00

9

10

11

12

15
Clear

Maximum Machining Diameter(mm)
1

16

20

30

35

40

ø42

44

50

50（∞）

56

60

65

70

70（∞）

72

75

80

85

95

98

100

100（∞）

110

115

130

140

145

150

150（∞）

160

180

200

220

230

235

250（∞）

300

400

500

800

980

1000

2000

∞
Clear

Maximum Groove Depth(mm)
1

1.6

2

2.7

3

3.5

4

4.5

4.6

5

5.1

5.1(4.6)

5.1(5.1)

5.5

5.6

6

6.4

6.6

7

7.6

8

8.1

8.1(6.6)

8.1(8.1)

8.2

8.5

8.69

8.7

9

9.5

10

10.7

11

12

13

15

16

17

17.6

18

19

20

22

25

28

29

30

32

33

35

38

40

45

50

55

60

65

100

120
Clear

Cutting Direction
Drawing

Clear

Number of corners for tip use
- 1 Corner
- 2 Corner
- 3 Corner
Images

Clear

Shank height(mm)
8

10

12

15

16

17.48

17.5

19

19.05

19.5

20

22.4

25

25.4

25.9

28.7

30

31.75

31.9

32

37

38.1

40

44.5

47

48.3

50

50.8

51.01

57.2

60

63.5

79.5

80

101.6

135

155

208
Clear