Sprue bushes / material selectable / end form selectable / flange thickness 15mm

Click on this image to zoom in.

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SBBH16-[30-150/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBH20-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBH25-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBHH16-[30-150/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBHH20-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBHH25-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBT16-[30-150/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBT20-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBT25-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBTH16-[30-150/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBTH20-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBTH25-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBX16-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBX20-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBX25-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBXH16-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBXH20-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBBXH25-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]
SBGH16-[30-150/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-16/0.1]-G[1-10/1]
SBGH20-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-20/0.1]-G[1-10/1]
SBGH25-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-25/0.1]-G[1-10/1]
SBGHH16-[30-150/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-15.9/0.1]-G[1-10/1]
SBGHH20-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-19.9/0.1]-G[1-10/1]
SBGHH25-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-24.9/0.1]-G[1-10/1]
SBGT16-[30-150/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-15.9/0.1]-G[1-10/1]
SBGT20-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-19.9/0.1]-G[1-10/1]
SBGT25-[0-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-24.9/0.1]-G[1-10/1]
SBGTH16-[30-150/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-15.9/0.1]-G[1-10/1]
SBGTH20-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-19.9/0.1]-G[1-10/1]
SBGTH25-[30-200/0.1]-SR[0,10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-24.9/0.1]-G[1-10/1]
SBGX16-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-16/0.1]-G[1-10/1]
SBGX20-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-20/0.1]-G[1-10/1]
SBGX25-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2,2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[4-25/0.1]-G[1-10/1]
SBGXH16-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-15.9/0.1]-G[1-10/1]
SBGXH20-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-19.9/0.1]-G[1-10/1]
SBGXH25-[30-100/0.1]-SR[10.5,11,12,13,16,20,21,23]-P[2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,8]-A[1-4/0.5]-V[5.6-24.9/0.1]-G[1-10/1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Tip matching shape	Nozzle touch part specification	D (Shaft diameter) (mm)	L (Bearing bore length) (mm)	A (Taper angle at sprue) (°)	G (Taper angle) (mm)	P (Sprue diameter) (mm)	SR (Nozzle part) (mm)	V (Tip diameter) (mm)
1	Quote	10	HPM1 Equivalent	Straight	Normal	16	30 ～ 150	1 ～ 4	-	2 ～ 8	0 ～ 23	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	20	30 ～ 200	1 ～ 4	-	2 ～ 8	0 ～ 23	-
1	Quote	10	HPM1 Equivalent	Straight	Normal	25	30 ～ 200	1 ～ 4	-	2 ～ 8	0 ～ 23	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	16	30 ～ 150	1 ～ 4	-	2.5 ～ 8	0 ～ 23	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	20	30 ～ 200	1 ～ 4	-	2.5 ～ 8	0 ～ 23	-
1	Quote	10	HPM1 Equivalent	Straight	String eliminator	25	30 ～ 200	1 ～ 4	-	2.5 ～ 8	0 ～ 23	-
1	Quote	10	SKD61	Straight	Normal	16	30 ～ 150	1 ～ 4	-	2 ～ 8	0 ～ 23	-
1	Quote	10	SKD61	Straight	Normal	20	30 ～ 200	1 ～ 4	-	2 ～ 8	0 ～ 23	-
1	Quote	10	SKD61	Straight	Normal	25	30 ～ 200	1 ～ 4	-	2 ～ 8	0 ～ 23	-
1	Quote	10	SKD61	Straight	String eliminator	16	30 ～ 150	1 ～ 4	-	2.5 ～ 8	0 ～ 23	-
1	Quote	10	SKD61	Straight	String eliminator	20	30 ～ 200	1 ～ 4	-	2.5 ～ 8	0 ～ 23	-
1	Quote	10	SKD61	Straight	String eliminator	25	30 ～ 200	1 ～ 4	-	2.5 ～ 8	0 ～ 23	-
1	Quote	10	DC53	Straight	Normal	16	30 ～ 100	1 ～ 4	-	2 ～ 8	10.5 ～ 23	-
1	Quote	10	DC53	Straight	Normal	20	30 ～ 100	1 ～ 4	-	2 ～ 8	10.5 ～ 23	-
1	Quote	10	DC53	Straight	Normal	25	30 ～ 100	1 ～ 4	-	2 ～ 8	10.5 ～ 23	-
1	Quote	10	DC53	Straight	String eliminator	16	30 ～ 100	1 ～ 4	-	2.5 ～ 8	10.5 ～ 23	-
1	Quote	10	DC53	Straight	String eliminator	20	30 ～ 100	1 ～ 4	-	2.5 ～ 8	10.5 ～ 23	-
1	Quote	10	DC53	Straight	String eliminator	25	30 ～ 100	1 ～ 4	-	2.5 ～ 8	10.5 ～ 23	-
1	Quote	10	HPM1 Equivalent	Tapered	Normal	16	30 ～ 150	1 ～ 4	1 ～ 10	2 ～ 8	0 ～ 23	4 ～ 16
1	Quote	10	HPM1 Equivalent	Tapered	Normal	20	30 ～ 200	1 ～ 4	1 ～ 10	2 ～ 8	0 ～ 23	4 ～ 20
1	Quote	10	HPM1 Equivalent	Tapered	Normal	25	0 ～ 200	1 ～ 4	1 ～ 10	2 ～ 8	0 ～ 23	4 ～ 25
1	Quote	10	HPM1 Equivalent	Tapered	String eliminator	16	30 ～ 150	1 ～ 4	1 ～ 10	2.5 ～ 8	0 ～ 23	5.6 ～ 15.9
1	Quote	10	HPM1 Equivalent	Tapered	String eliminator	20	30 ～ 200	1 ～ 4	1 ～ 10	2.5 ～ 8	0 ～ 23	5.6 ～ 19.9
1	Quote	10	HPM1 Equivalent	Tapered	String eliminator	25	30 ～ 200	1 ～ 4	1 ～ 10	2.5 ～ 8	0 ～ 23	5.6 ～ 24.9
1	Quote	10	SKD61	Tapered	Normal	16	30 ～ 150	1 ～ 4	1 ～ 10	2 ～ 8	0 ～ 23	4 ～ 15.9
1	Quote	10	SKD61	Tapered	Normal	20	0 ～ 200	1 ～ 4	1 ～ 10	2 ～ 8	0 ～ 23	4 ～ 19.9
1	Quote	10	SKD61	Tapered	Normal	25	0 ～ 200	1 ～ 4	1 ～ 10	2 ～ 8	0 ～ 23	4 ～ 24.9
1	Quote	10	SKD61	Tapered	String eliminator	16	30 ～ 150	1 ～ 4	1 ～ 10	2.5 ～ 8	0 ～ 23	5.6 ～ 15.9
1	Quote	10	SKD61	Tapered	String eliminator	20	30 ～ 200	1 ～ 4	1 ～ 10	2.5 ～ 8	0 ～ 23	5.6 ～ 19.9
1	Quote	10	SKD61	Tapered	String eliminator	25	30 ～ 200	1 ～ 4	1 ～ 10	2.5 ～ 8	0 ～ 23	5.6 ～ 24.9
1	Quote	10	DC53	Tapered	Normal	16	30 ～ 100	1 ～ 4	1 ～ 10	2 ～ 8	10.5 ～ 23	4 ～ 16
1	Quote	10	DC53	Tapered	Normal	20	30 ～ 100	1 ～ 4	1 ～ 10	2 ～ 8	10.5 ～ 23	4 ～ 20
1	Quote	10	DC53	Tapered	Normal	25	30 ～ 100	1 ～ 4	1 ～ 10	2 ～ 8	10.5 ～ 23	4 ～ 25
1	Quote	10	DC53	Tapered	String eliminator	16	30 ～ 100	1 ～ 4	1 ～ 10	2.5 ～ 8	10.5 ～ 23	5.6 ～ 15.9
1	Quote	10	DC53	Tapered	String eliminator	20	30 ～ 100	1 ～ 4	1 ～ 10	2.5 ～ 8	10.5 ～ 23	5.6 ～ 19.9
1	Quote	10	DC53	Tapered	String eliminator	25	30 ～ 100	1 ～ 4	1 ～ 10	2.5 ～ 8	10.5 ～ 23	5.6 ～ 24.9

Products homepage

Basic information

Product type	Bolt fixing	Bolt specifications	Normal bolt	Head thickness(mm)	15

Configure

36Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- HPM1 Equivalent
- SKD61
- DC53
Clear
Tip matching shape
- Straight
- Tapered
Clear
Nozzle touch part specification
- Normal
- String eliminator
Clear
D (Shaft diameter)(mm)
16

20

25
Clear
L (Bearing bore length)(mm)
[0-200/0.1mm Unit(s)]
Clear
A (Taper angle at sprue)(°)
[1-4/0.5° Unit(s)]
Clear
G (Taper angle)(mm)
[1-10/1mm Unit(s)]
Clear
P (Sprue diameter)(mm)
2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8
Clear
SR (Nozzle part)(mm)
0

10.5

11

12

13

16

20

21

23
Clear
V (Tip diameter)(mm)
[4-25/0.1mm Unit(s)]
Clear
Type
- SBBH
- SBBHH
- SBBT
- SBBTH
- SBBX
- SBBXH
- SBGH
- SBGHH
- SBGT
- SBGTH
- SBGX
- SBGXH
Clear
Filter by CAD data type
- 2D
- 3D
Clear