- Year(Year)
- 25
- Applicable date marked outer diameter(mm)
- 5
- Type
- CAD
- 2D
- 3D
- Días estimados de envío
- Todo
- En el plazo de 9 días laborables
Date Marked Pin Set (Outside Rings for Heat Resisting with removal tap) (HDTX-R5-25)
Plano de contorno
| D | D | B | L | E(Dismounting tap hole) | K | Arrow mark depth | Drafts for pulling |
| 4 | 4 | 2.6 | 8 | M1.8×0.35 | 2.4 | 0.12 | 20° |
| 5 | 5 | 2.9 | 8 | M2×0.4 | 2.4 | 0.14 | 20° |
| 6 | 6 | 3.95 | 8 | M2.5×0.45 | 2.4 | 0.18 | 23° |
| 8 | 8 | 5 | 10 | M3×0.5 | 2.8 | 0.18 | 25° |
| 10 | 10 | 6.3 | 12 | M3×0.5 | 3 | 0.2 | 25° |
| 12 | 12 | 7.5 | 14 | M4×0.7 | 4 | 0.2 | 25° |
| 16 | 16 | 11 | 14 | M5×0.8 | 3.7 | 0.22 | 25° |
| 20 | 20 | 13.2 | 16 | M5×0.8 | 3.7 | 0.22 | 25° |
Outside rings on this page are adapted for combination with inside arrows for Heat-resistant・Removal tap Type.
(This outside rings does not incompatible with inside arrows for PL exchange type.)
Material SUS420 
Hardness 50～53HRC
Información detallada
Información básica
Date Marked Pin Set for Plastic Mold, date marked pin sets are embedded in a cavity or core surface of mold. It's used for engraving number of date, month, year, letter or sign on the injection plastic parts. It can help to reduce cost without having to engrave molds and can be replaced.
Especificaciones y fecha de entrega
Specification
| Part Number | － | Year | |
| (Year) | HDYYX6 | － | 18 |
| (No mark) | HDNX10 | ||
| (Year) | HDTX－R16 | － | 18 |
| (Month) | HDTDX－R16 | ||
Part Number | － | ①Characters for engraving | － | ②Characters for engraving | － | ③Characters for engraving | － | ④Characters for engraving | － | ⑤Characters for engraving | － | ⑥Characters for engraving | － | ⑫Characters for engraving |
HDTX－R 3M 6 | － | POM | － | PS | － | SAN | ||||||||
HDTX－R 6M16 | － | 10 | － | 20 | － | 30 | － | 40 | － | 50 | － | 60 | ||
HDTX－R12M16 | － | % | － | 1 | － | 2 | － | 3 | － | 4 | － | 5 | … － | F |
Specification
－Heat-resistant with removal tap type
■Year switching type
| Indication | outside rings divisions | Part Number | Year (Sales period) | ||
| Type | D | ||||
| 4 year type |  | 12 uniform divisions | HDTX－R | 4 | 18 (Sep.2017 ～ Mar.2019) 19 (Sep.2018 ～ Mar.2020) 20 (Sep.2019 ～ Mar.2021) |
| 5 | |||||
| 6 | |||||
| 8 | |||||
| 10 | |||||
| 12 | |||||
| 16 | |||||
| 20 | |||||
| 6 year type |  | 12 uniform divisions | HDTXS－R | 4 | 18 (Sep.2017 ～ Mar.2019) 19 (Sep.2018 ～ Mar.2020) 20 (Sep.2019 ～ Mar.2021) |
| 5 | |||||
| 6 | |||||
| 8 | |||||
| 10 | |||||
| 12 | |||||
| 16 | |||||
| 20 | |||||
■Month Day No marking Type
| Indication | Outside rings divisions | Part Number | ||
| Type | D | |||
| Month |  | 12 uniform divisions | HDTDX－R | 4 |
| 5 | ||||
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| 20 | ||||
| Day (1st digit) |  | 12 uniform divisions | HDTEX－R | 4 |
| 5 | ||||
 | 10 uniform divisions | 6 | ||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| 20 | ||||
| Day (2nd digit) |  | 12 uniform divisions | HDTFX－R | 4 |
| 5 | ||||
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| 20 | ||||
| Day |  | 31 uniform divisions | HDTGX－R | 16 |
| No-marking |  | 12 uniform divisions | HDTNX－R | 4 |
| 5 | ||||
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
－Heat-resistant・removal tap type / Character design type
■Outside ring character design type
| Indication | |||||||
| 1M (1place) | 2M (2places) | 3M (3places) | 4M (4places) | 5M (5places) | 6M (6places) | 10M (10places) | 12M (12places) |
engraving position | engraving position | engraving position | engraving position | engraving position Outside ring is divided equally among ten | engraving position | engraving position Outside ring is divided equally among ten | engraving position |
| Up to 3 characters can be designated at each engraving position. | Up to 2 characters can be designated at each engraving position. | Only 1 character can be designated at each engraving position. | |||||
| Part Number | Engraving characters (1~3 characters/Characters pronted in blue in indications) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type | Indication | D | engraving position ①～⑫ | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| HDTX－R | 1M 2M 3M | 4M 5M※ 6M※ | 10M※ 12M | 4 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 12 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 16 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
●Dividing of outside rings
| 1M・2M・3M・4M 6M・12M | 12 uniform divisions |
| 5M・10M | 10 uniform divisions |
Use # for －(Minus), and % for 
(Space).
※Not applicable to D4 and D5 of 5M, 6M and 10M.