Página principal de MISUMI
Automation Components
Locating, Positioning, Jigs & Fixtures
Automotive Inspection Components
Hinge Units, Slide Units, Base Plates, Angle Plates for Inspection Jigs
Inspection Jigs / Angle Plate Units

Condiciones del filtro

Set Product Configurable
- No Arm
- Set
Application
- For Flat Arm
- For L-Shaped Arm
Direction
- L (Left Direction)
- R (Right Direction)
A(mm)
- 50
- 75
- 100
H(mm)
- 100
- 150
- 200
- 250
L Pin
- Straight [ST]
- Taper [TP]
T(mm)
- 9
- 12
Z(mm)
- 60
[45-220/5mm unidades]
Type
- JIFL
- JIFR
- JILL
- JILR
- JINFL
- JINFR
- JINLL
- JINLR
CAD
- 2D
- 3D
Días estimados de envío
- Todo
- En el plazo de 19 días laborables

Inspection Jigs / Angle Plate Units

Ponga el cursor sobre la imagen para agrandar

Página anterior

Página siguiente

CatálogoP.1-1857

Número de pieza:

Sin liquidar. 47 candidatos encontrados.

Plano de contorno y tabla de especificaciones
Lista de números de pieza
Información detallada
Catálogo

Plano de contorno y tabla de especificaciones

Horizontal Rest Position		Vertical Rest Position
JIF (Set)		JIL (Set)
JINF (No Arm)		JINL (No Arm)

* Tolerance is applicable to dowel holes only
[!] The drawing is for a right-facing configuration. Mounting hole position on bottom is common to right and left facing types. Specify Alteration SYM to change the mounting hole positions symmetrically.
[ ! ] Height of pivot hole (Z dimension) is selectable.
[!] Set products are pair engraved on the Angle Plates and Arms. Use identically engraved pair.
[ ! ] Stopper is assembled, but the arm is not assembled prior to shipping.
[ ! ] For No Arm Type, L pin hole on angle plate is pilot hole (ø7.8).
[ ! ] For Angle Plate Support Stand JIST and Angle Plate JIP, please refer to the e-catalog.

[M] Material
Angle Plate: EN−JL 1040 Equiv.
Arm Stopper
: EN 1.0038 Equiv.
[A]Accessory (MISUMI P/N)
■For Pivot Hole: Hinge pin (when H = - 200) CLBGNU10−24−FC21
(When H = 250) CLBGNU10−27−FC21
Spherical Washer No MISUMI P/N
EN 1.1191 Equiv./32−38HRC/
Black Oxide
(MISUMI P/N)
■Arm fixing L pin (straight) KJLSB8
(Tapered) KJLB8
Knob bolt NKSM8
■Fixing stopper bolt 2 CB6−20
Dowel pin 2 MSTM6−20

Specification Table

Part Number	—	H	—	T	—	Z	—	L Pin
JIFL75 JINFR50	— —	H150 H100	—	T9	— —	Z110 Z50	— —	TP ST

Part Number			H Selection	T Selection	Z 5 mm Increments		L Pin Type	Pivot Position, Arm Dimension			Angle Plate Dimension			Mounting Hole Position Dimension
								X	Y·R		B	t₁	t₂	a₁	a₂	b
Type	Direction	A			Horizontal Rest	Vertical Rest
									Horizontal Rest	Vertical Rest
JIF JIL JINF JINL	(For Left Facing) L (For Right Facing) R	50	100	9 12	45 to 60	60	(Tapered) TP (Straight) ST	10	10	10	50	15	8	25	15	30
			150		65 to 110	60 to 110
		75	150		55 to 120	60 to 90		15	20	15	75		14	30	30	50
			200		125 to 170	60 to 140
		100	200		55 to 170	60 to 120					120			50	50	70
			250		175 to 220	60 to 170						18	15

Alterations

Part Number	—	H	—	T	—	Z	—	L Pin	—	(SYM·NNA)
JIFL75	—	H150	—	T9	—	Z110	—	TP	—	SYM

Alterations	Code	Spec.
Position of Bottom Face Mounting Hole	SYM	Positions the dowel hole and mounting hole symmetrically.
No Stopper Dowel Hole	NNA	Eliminates dowel holes on stopper part (2-ø6) and assembles L pin hole temporarily at ø7.8. (Dowel Pin and L Pin are included) Adjust by spot fixing before use. (Adjustments required)

Lista de números de pieza

Número de artículos

Número de pieza

JIFL50-H100-T[9,12]-Z[45-60/5]-[ST,TP]

JIFL50-H150-T[9,12]-Z[65-110/5]-[ST,TP]

JIFL75-H150-T[9,12]-Z[55-120/5]-[ST,TP]

JIFL75-H200-T[9,12]-Z[125-170/5]-[ST,TP]

JIFL100-H200-T[9,12]-Z[55-170/5]-[ST,TP]

JIFL100-H250-T[9,12]-Z[175-220/5]-[ST,TP]

JIFR50-H100-T[9,12]-Z[45-60/5]-[ST,TP]

JIFR50-H150-T[9,12]-Z[65-110/5]-[ST,TP]

JIFR75-H150-T[9,12]-Z[55-120/5]-[ST,TP]

JIFR75-H200-T[9,12]-Z[125-170/5]-[ST,TP]

JIFR100-H200-T[9,12]-Z[55-170/5]-[ST,TP]

JIFR100-H250-T[9,12]-Z[175-220/5]-[ST,TP]

JILL50-H100-T[9,12]-Z60-[ST,TP]

JILL50-H150-T[9,12]-Z[60-110/5]-[ST,TP]

JILL75-H150-T[9,12]-Z[60-90/5]-[ST,TP]

JILL75-H200-T[9,12]-Z[60-140/5]-[ST,TP]

JILL100-H200-T[9,12]-Z[60-120/5]-[ST,TP]

JILL100-H250-T[9,12]-Z[60-170/5]-[ST,TP]

JILR50-H100-T[9,12]-Z60-[ST,TP]

JILR50-H150-T[9,12]-Z[60-110/5]-[ST,TP]

JILR75-H150-T[9,12]-Z[60-90/5]-[ST,TP]

JILR75-H200-T[9,12]-Z[60-140/5]-[ST,TP]

JILR100-H200-T[9,12]-Z[60-120/5]-[ST,TP]

JILR100-H250-T[9,12]-Z[60-170/5]-[ST,TP]

JINFL50-H100-Z[45-60/5]-[ST,TP]

JINFL50-H150-Z[65-110/5]-[ST,TP]

JINFL75-H150-Z[55-120/5]-[ST,TP]

JINFL75-H200-Z[125-170/5]-[ST,TP]

JINFL100-H250-Z[175-220/5]-[ST,TP]

JINFR50-H100-Z[45-60/5]-[ST,TP]

JINFR50-H150-Z[65-110/5]-[ST,TP]

JINFR75-H150-Z[55-120/5]-[ST,TP]

JINFR75-H200-Z[125-170/5]-[ST,TP]

JINFR100-H200-Z[55-170/5]-[ST,TP]

JINFR100-H250-Z[175-220/5]-[ST,TP]

JINLL50-H100-Z60-[ST,TP]

JINLL50-H150-Z[60-110/5]-[ST,TP]

JINLL75-H150-Z[60-90/5]-[ST,TP]

JINLL75-H200-Z[60-140/5]-[ST,TP]

JINLL100-H200-Z[60-120/5]-[ST,TP]

JINLL100-H250-Z[60-170/5]-[ST,TP]

JINLR50-H100-Z60-[ST,TP]

JINLR50-H150-Z[60-110/5]-[ST,TP]

JINLR75-H150-Z[60-90/5]-[ST,TP]

JINLR75-H200-Z[60-140/5]-[ST,TP]

JINLR100-H200-Z[60-120/5]-[ST,TP]

JINLR100-H250-Z[60-170/5]-[ST,TP]

Set Product Configurable

Application

Direction

(mm)

L Pin

(mm)

RoHS?

Cantidad mínima de pedido

Set	For Flat Arm	L (Left Direction)	50	100	Straight [ST] / Taper [TP]	9 ～ 12	45 ～ 60	10	1 piezas
Set	For Flat Arm	L (Left Direction)	50	150	Straight [ST] / Taper [TP]	9 ～ 12	65 ～ 110	10	1 piezas
Set	For Flat Arm	L (Left Direction)	75	150	Straight [ST] / Taper [TP]	9 ～ 12	55 ～ 120	10	1 piezas
Set	For Flat Arm	L (Left Direction)	75	200	Straight [ST] / Taper [TP]	9 ～ 12	125 ～ 170	10	1 piezas
Set	For Flat Arm	L (Left Direction)	100	200	Straight [ST] / Taper [TP]	9 ～ 12	55 ～ 170	10	1 piezas
Set	For Flat Arm	L (Left Direction)	100	250	Straight [ST] / Taper [TP]	9 ～ 12	175 ～ 220	10	1 piezas
Set	For Flat Arm	R (Right Direction)	50	100	Straight [ST] / Taper [TP]	9 ～ 12	45 ～ 60	10	1 piezas
Set	For Flat Arm	R (Right Direction)	50	150	Straight [ST] / Taper [TP]	9 ～ 12	65 ～ 110	10	1 piezas
Set	For Flat Arm	R (Right Direction)	75	150	Straight [ST] / Taper [TP]	9 ～ 12	55 ～ 120	10	1 piezas
Set	For Flat Arm	R (Right Direction)	75	200	Straight [ST] / Taper [TP]	9 ～ 12	125 ～ 170	10	1 piezas
Set	For Flat Arm	R (Right Direction)	100	200	Straight [ST] / Taper [TP]	9 ～ 12	55 ～ 170	10	1 piezas
Set	For Flat Arm	R (Right Direction)	100	250	Straight [ST] / Taper [TP]	9 ～ 12	175 ～ 220	10	1 piezas
Set	For L-Shaped Arm	L (Left Direction)	50	100	Straight [ST] / Taper [TP]	9 ～ 12	60	10	1 piezas
Set	For L-Shaped Arm	L (Left Direction)	50	150	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 110	10	1 piezas
Set	For L-Shaped Arm	L (Left Direction)	75	150	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 90	10	1 piezas
Set	For L-Shaped Arm	L (Left Direction)	75	200	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 140	10	1 piezas
Set	For L-Shaped Arm	L (Left Direction)	100	200	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 120	10	1 piezas
Set	For L-Shaped Arm	L (Left Direction)	100	250	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 170	10	1 piezas
Set	For L-Shaped Arm	R (Right Direction)	50	100	Straight [ST] / Taper [TP]	9 ～ 12	60	10	1 piezas
Set	For L-Shaped Arm	R (Right Direction)	50	150	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 110	10	1 piezas
Set	For L-Shaped Arm	R (Right Direction)	75	150	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 90	10	1 piezas
Set	For L-Shaped Arm	R (Right Direction)	75	200	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 140	10	1 piezas
Set	For L-Shaped Arm	R (Right Direction)	100	200	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 120	10	1 piezas
Set	For L-Shaped Arm	R (Right Direction)	100	250	Straight [ST] / Taper [TP]	9 ～ 12	60 ～ 170	10	1 piezas
No Arm	For Flat Arm	L (Left Direction)	50	100	Straight [ST] / Taper [TP]	-	45 ～ 60	10	1 piezas
No Arm	For Flat Arm	L (Left Direction)	50	150	Straight [ST] / Taper [TP]	-	65 ～ 110	10	1 piezas
No Arm	For Flat Arm	L (Left Direction)	75	150	Straight [ST] / Taper [TP]	-	55 ～ 120	10	1 piezas
No Arm	For Flat Arm	L (Left Direction)	75	200	Straight [ST] / Taper [TP]	-	125 ～ 170	10	1 piezas
No Arm	For Flat Arm	L (Left Direction)	100	250	Straight [ST] / Taper [TP]	-	175 ～ 220	10	1 piezas
No Arm	For Flat Arm	R (Right Direction)	50	100	Straight [ST] / Taper [TP]	-	45 ～ 60	10	1 piezas
No Arm	For Flat Arm	R (Right Direction)	50	150	Straight [ST] / Taper [TP]	-	65 ～ 110	10	1 piezas
No Arm	For Flat Arm	R (Right Direction)	75	150	Straight [ST] / Taper [TP]	-	55 ～ 120	10	1 piezas
No Arm	For Flat Arm	R (Right Direction)	75	200	Straight [ST] / Taper [TP]	-	125 ～ 170	10	1 piezas
No Arm	For Flat Arm	R (Right Direction)	100	200	Straight [ST] / Taper [TP]	-	55 ～ 170	10	1 piezas
No Arm	For Flat Arm	R (Right Direction)	100	250	Straight [ST] / Taper [TP]	-	175 ～ 220	10	1 piezas
No Arm	For L-Shaped Arm	L (Left Direction)	50	100	Straight [ST] / Taper [TP]	-	60	10	1 piezas
No Arm	For L-Shaped Arm	L (Left Direction)	50	150	Straight [ST] / Taper [TP]	-	60 ～ 110	10	1 piezas
No Arm	For L-Shaped Arm	L (Left Direction)	75	150	Straight [ST] / Taper [TP]	-	60 ～ 90	10	1 piezas
No Arm	For L-Shaped Arm	L (Left Direction)	75	200	Straight [ST] / Taper [TP]	-	60 ～ 140	10	1 piezas
No Arm	For L-Shaped Arm	L (Left Direction)	100	200	Straight [ST] / Taper [TP]	-	60 ～ 120	10	1 piezas
No Arm	For L-Shaped Arm	L (Left Direction)	100	250	Straight [ST] / Taper [TP]	-	60 ～ 170	10	1 piezas
No Arm	For L-Shaped Arm	R (Right Direction)	50	100	Straight [ST] / Taper [TP]	-	60	10	1 piezas
No Arm	For L-Shaped Arm	R (Right Direction)	50	150	Straight [ST] / Taper [TP]	-	60 ～ 110	10	1 piezas
No Arm	For L-Shaped Arm	R (Right Direction)	75	150	Straight [ST] / Taper [TP]	-	60 ～ 90	10	1 piezas
No Arm	For L-Shaped Arm	R (Right Direction)	75	200	Straight [ST] / Taper [TP]	-	60 ～ 140	10	1 piezas
No Arm	For L-Shaped Arm	R (Right Direction)	100	200	Straight [ST] / Taper [TP]	-	60 ～ 120	10	1 piezas
No Arm	For L-Shaped Arm	R (Right Direction)	100	250	Straight [ST] / Taper [TP]	-	60 ～ 170	10	1 piezas

Precio unitario (IVA no incluidos)(precio unitario IVA incluidos)	Fecha de envío estándar

- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables
- ( - )	19 días laborables

Información detallada

Información básica

Información básica

[Features] The arm section can be machined as required and used to measure the shape of the workpiece.

Catálogo

Products homepage

Catálogo (abierto a 2 páginas)