Condiciones del filtro
- Post Dia.(mm)
- 12
- Material
- Aluminum
- Aluminum
- Surface Treatment
- Thickness Type
- P
- 15
- 20
- 25
- 30
- Type
- CAD
- 2D
- 3D
- Días estimados de envío
- Todo
- En el plazo de 7 días laborables
Parallel Configuration / Same Diameter / Selectable Pitch (AKP12-[15,20,25,30])
Plano de contorno y tabla de especificaciones
| Type | Material | Surface Treatment | Accessory | |
| Standard | Thin | |||
| KKP | KKPT | EN 1.0038 Equiv. | Black Oxide | Hex Socket Head Cap Screw |
| MKP | - | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
| AKP | - | EN AW-6063 Equiv. | Black Anodize | Hex Socket Head Cap Screw |
| SKP | - | EN 1.4301 Equiv. | - | Hex Socket Head Cap Screw (Stainless Steel) |
| D | Included Screw (Thin Type has 1 screw on each side.) | |
| Equal Dia., Parallel | Unequal Dia., Parallel | |
| 8 | M5-12, 2pcs. | - |
| 10 | M5-15, 2 pcs. | M5-12/M5-10, 1pc. each |
| 12 | M5-15, 2 pcs. | M5-15, 2 pcs. |
| 15 | M5-20, 4pcs. | M5-20/M5-15, 2pcs. each |
| 20 | M6-25, 4pcs. | M6-25/M6-20, 2pcs. each |
| 25 | M6-30, 4pcs. | M6-30/M6-20, 2pcs. each |
| 30 | M8-35, 4pcs. | M8-35/M8-30, 2pcs. each |
| 35 | M8-40, 4pcs. | M8-40/M8-35, 2pcs. each |
Specifications
| Part Number | - | D1 | - | P |
| KKP10 KKQT20 | - | 15 | - - | 20 30 |
| Part Number | P Selection | A | B | C | C1 | E | H | S | M | d | ||||||||||||
| Type | DH7 | |||||||||||||||||||||
| Standard KKP MKP AKP SKP | Thin KKPT | 8 | +0.015 0 | 10 | 15 | 20 | 25 | A=P+(2xE) | 12 | 12 | - | 14 | 8 | - | M5 | 5.5 | ||||||
| 10 | 15 | 20 | 25 | 30 | 16 | 16 | 9 | 15 | 9 | - | ||||||||||||
| 12 | +0.018 0 | 16 | 10 | - | ||||||||||||||||||
| 15 | 20 | 25 | 30 | 40 | 22 | 22 | 12 | 18 | 12 | 11 | ||||||||||||
| 20 | +0.021 0 | 25 | 30 | 40 | 50 | 28 | 28 | 16 | 22 | 15 | 14 | M6 | 6.6 | |||||||||
| 25 | 30 | 40 | 50 | 75 | 32 | 32 | 19 | 25 | 18 | 16 | ||||||||||||
| 30 | 50 | 75 | 100 | 150 | 40 | 40 | 29 | 21 | 20 | M8 | 9 | |||||||||||
| 35 | +0.025 0 | 45 | 45 | 22 | 32 | 24 | 24 | |||||||||||||||
| For the available sizes, refer to the price list. The tolerance and parallelism of DH7 are the tolerances before slitting. For mating, g6, f8 shaft tolerances are recommended. Tightening with a long wrench is recommended. | ||||||||||||||||||||||
Información detallada
Información básica
Brace clamp that allows you to fix 2 upright braces side by side. [Material]-EN 1.0038 Equiv.-EN AW-6063 Equiv.-EN 1.4301 Equiv. (sintered)