Timing belt pulleys / L / flanged pulley selectable / configurable / aluminium, steel(Lista de números de pieza: 7 página)

Back to the Category Toothed Pulleys/Timing Pulleys/Idler Pulleys

Technical Drawing - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Open the technical drawing in the new window
 

Available dimensions and tolerances can be found under the tab More Information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Toothed Pulleys/Timing Pulleys/Idler Pulleys

 

Type	Belt Width				Material *1		Surface Treatment	Accessory *1 Set Screws
	12.7mm (1/2inch)	19.1mm (3/4inch)	25.4mm (1inch)	38.1mm (1.5inch)	Pulley	Flange
	L050	L075	L100	L150
ATPA	●	●	●	●	Extra Super Duralumin Aluminum Alloy	Aluminum Alloy	Clear Anodize	EN 1.4301 Equiv.
ATPB	●	●	●	●			Black Anodize
ATPK	●	●	●	●			Hard Clear Anodize *2
ATPN	●	●	●	●			Electroless Nickel Plating
ATPT	●	●	●	●	EN 1.1191 Equiv.	EN 1.0330 Equiv.	-	EN 1.7220 Equiv. (Black Oxide)
ATP	●	●	●	●			Black Oxide
ATPP	●	●	●	●			Electroless Nickel Plating

Flange is installed, and set screws are included with Shaft Bores P, N and C.
*1. The above material and accessory might be changed to the ones equivalent to the originals.
*2. Hard Clear Anodize: Film Hardness 300HV ~

Further specifications can be found under the tab More Information.
 

Composition of a Product Code - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Part Number

-

Pulley Shape

-

Shaft Bore Specs., I.D.

-

Z

-

J

-

Q

-

R

-

S

-

T

(Shaft Bore Specs.: H, P, N, C)

ATP14L075

-

A

-

N10

R47

(Shaft Bore Specs.: V, F)

ATP36L100

-

A

-

V15

-

Z29

-

J18.0

(Shaft Bore Specs: Y)

ATP50L150

-

A

-

Y25

-

Q47

-

-

S12

-

T12

Alterations - Toothed Pulleys/Timing Pulleys/Idler Pulleys

Here to the Overview of Options as PDF.

General Information - Toothed Pulleys/Timing Pulleys/Idler Pulleys

 

Selection details of toothed pulleys/timing pulleys/idler pulleys

- Material: aluminum, steel, stainless steel (stainless steel), plastic

- Coatings: uncoated, burnished, anodized, nickel-plated

- Profile form: 1.5GT, 2GT, 3GT, 5GT, P2M, P3M, P5M, P8M, S2M, S3M, S5M, S8M, S14M, T2.5, T5, T10, AT5, AT10, 5M, 8M, 14M, 8YU, H, L, MXL, XL, PowerGrip GT3: MR2, MR3, MR5

- ISO tolerances: H7

- Belt width (mm): 4, 4.8, 6, 6.4, 7, 7.9, 9, 9.5, 10, 12, 12.7, 15, 18, 19.1, 20, 25, 25.4, 26, 28, 30, 31, 38,1, 40, 50, 50.8, 53, 60, 74, 76.2, 100

- Belt width (inches): 0.19, 0.25, 0.31, 0.37, 0.5, 0.75, 1, 1.5, 2

- Number of teeth: 10 to 72

 

Description/Basics

The toothed pulley for mechanical engineering is intended for the transmission of force and torque. Timing pulleys enable a gear ratio of speeds through belt pulleys of different sizes. Timing pulleys are more efficient, durable and significantly more maintenance-friendly compared to chain transmissions.

How much torque and load a timing pulley can transmit depends on the width of the belt. The width of the belt must be calculated. It is recommended to ensure the belt is correctly tensioned. MISUMI already offers the suitable idler pulley and return rollers with integrated ball bearings. For design and design help follow this link.

Different profile shapes of the toothed belts and belt pulleys are responsible for the transmission of power. Depending on the positioning accuracy, the applied torque and the conveying weight, MISUMI offers the fitting pulley. Toothed belt drives are generally used in the industry in three areas:
Positioning: Timing pulleys is often used in 3D printers. A toothed pulley with a semi-circular profile (e.g., GT) is often used for the required position accuracy of a 3D printers. The round shape offers the benefit of little play when the direction changes.
Drive: toothed pulleys are also used for high torque. In most cases, a timing pulley with a rounded trapezoidal profile (e.g., S8M) is used. These are particularly well suited for the transmission of high forces, which occur in drives of various applications in order to drive mechanical components.
Conveying: toothed pulleys can also be used for transporting loads. A straight trapezoidal profile is often used for this purpose (e.g., AT). This toothed pulley shape offers a large surface for loading and transmitting of loads.

Which toothed pulley or timing pulley is the right one for your application depends on the respective task of the toothed belt drive. Different toothed disc profiles have proven themselves for each type of application.

Various bore hole shapes and fastening variants are available for shaft mounting. These allow fastening via set screws, keyways and by means of Mecha locks. Fastening via a clamping sleeve has the further advantage that it allows adjusting the alignment continuously. The MISUMI product assortment has these ready-to-install.

Application Examples - Toothed Pulleys/Timing Pulleys/Idler Pulleys

 

Industrial Applications