Registro

¡Estamos traduciendo nuestra tienda online al español! 

Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Confirmado
100%
  • Number of Teeth (Teeth)
  • Shape
  • Shaft Bore Dia. (Ø)
  • Tooth Width B (mm)
  • Hole Shape
  • Type
  • CAD
  • Días estimados de envío
    • Todo
    • En el plazo de 11 días laborables

Opciones adicionales

  • Through Hole Machining on Side [KTC] (mm)
      [22-37/1mm unidades]
    • Through Hole Dia. [K] (mm)
      [3-6/0.5mm unidades]
    • Tapping on Side [QFC] (mm)
        [22-37/1mm unidades]
      • Tap Dia. [M] (mm)

      Straight gears / ductively hardened / contact angle 20 degrees (GEAKBH1.5-32-15-A-15N-QFC30-M3)

      Número de pieza:

      GEAKBH1.5-32-15-A-15N-QFC30-M3
      Despejar
      • Precio unitario (IVA no incluidos)
        73.00 €
      • Total (IVA no incluidos)
        73.00 €
        Precio IVA incluidos:
        86.87 €
      • Días previstos de envío
        9 días laborables
        Fecha de envío de referencia: 03.11.2025
      Cantidad:
      Loading...
      Cantidad1 - 1011+
      Precio unitario (IVA no incluidos)
      (Precio unitario IVA incluidos)
      73.00 €
      (
      86.87 €
      )
      73.00 €
      (
      86.87 €
      )
      Días de envío
      Loading...
      Loading...

      Plano de contorno y tabla de especificaciones

      Dimensional Drawing

      Gear Shape
      Shape AShape B 
      [NG] Tapped shaft bores are not available for Shape A
       
      No surface treatment
      [ ! ] End surface of Shape A may not be surface treated
      as Shape A is made by cutting the hub of Shape B.
      [ ! ] High-frequency hardening is applied to the tips of the teeth.
      Shaft Bore Specifications (Selectable Gear Shapes)
      Straight Bore (Shape A, Shape B)Straight Bore + Tap (Shape B)Keyway (Shape A)Keyway + Tap (Shape B)
      [!] Relative positioning of keyway and teeth is not fixed.
        Tooth surface accuracy Equivalent to the new JIS B 1702-1 Class 8
        (Old JIS B 1702 Class 4)
       
      Keyway Dimensional Tolerance
      T Dim. Tolerance (H7)
      NominalPH7
      8 N to 10K+0.015
         0
      11 N to 18 N+0.018
         0
      19 N to 30 N+0.021
         0
      31 N to 50 N+0.025
         0
      [ ! ] Compliant with JIS B 0401-2.
      Keyway Dimensional Tolerance
      NominalbJS9t
      8 N to 10 N3±0.01251.4+0.1
         0
      10K to 12 N4±0.01501.8
      13 N to 17 N52.3
      18 N to 22 N62.8
      23 N to 30 N8±0.01803.3+0.2
         0
      31 N to 38 N10
      39 N to 44 N12±0.0215
      45 N to 50 N143.8
      [ ! ] Compliant with JIS B 1301.
      Unspecified Dimension Tolerance (Other than the teeth)
      Dimension RangeTolerance
      (mm)
      Overor Less
      0.53±0.1
      36±0.1
      630±0.2
      30120±0.3
      120400±0.5
      [ ! ] Compliant with JIS B 0405 Class m (intermediate).

       

      Type[M] Material[S] Surface Treatment[H] Hardness[A]Accessory
      Straight BoreStraight Bore + TapKeyway, Keyway + Tap
      GEAHBHGEABHGEAKBHEN 1.1191 Equiv.Black OxideTooth Induction Hardened
      51 to 55HRC (Depth 1 mm or more)
      Set Screw (Cup Point)
      (EN 1.7220 Equiv. Black Oxide)
      [ ! ] A set screw is not included for the shaft bore specification "Straight Bore."
      [ ! ] A set screw is included for the shaft hole specification "Tapped."
      Tapped Hole Dimensions
      Shaft bore diameter
      PH7
      M
      (Coarse)
      Accessory
      Set Screw
      6 to 12M4M4 × 3
      13 to 17M5M5 × 4
      18 to 30M6M6 × 5
      31 to 45M8M8 × 6
      46 to 56M10M10 × 8

      Specification Table

      Part NumberNumber of TeethBGear ShapeP
      GEAKBH2.0
      GEABH1.0

      30
      30

      20
      8

      A
      B

      25 N
      15
      Part NumberNumber of TeethBGear
      Shape
      Shaft Bore Dia. PH7 (1 mm Increments)d
      Reference Circle
      Dia.
      D
      Addendum Circle
      Dia.
      G
      Dedendum Circle
      Dia.
      HL12* 1 Allowable Transmission Force
      (N⋅m)
      Bending Strength
      TypeModuleStraight Bore
      Straight Bore + Tap
      Keyway
      Keyway + Tap
      Straight Bore
      (Shape A, Shape B)
      GEAHBH

      Straight Bore + Tap
      (Shape B)
      GEABH

      Keyway
      (Shape A)
      Keyway + Tap
      (Shape B)
      GEAKBH
      1.0188A

      B
      6 to 10182015.515181054.76
      206 to 118 N・10 N・10K202217.5175.57
      228 to 148 N to 12 N・10K222419.5186.42
      24242621.5207.27
      25252722.57.69
      26262823.58.12
      28283025.59.02
      3010 to 1710 N to 15 N
      10K
      303227.5259.87
      32323429.510.79
      35353732.512.13
      36363833.512.52
      4010 to 2110 N to 18 N
      10K
      404237.53013.07
      45454742.515.18
      48485045.516.44
      5012 to 2412 N to 18 N505247.53517.23
      6012 to 2812 N to 25 N606257.54021.50
      70707267.525.74
      8015 to 3515 N to 30 N808277.55029.98
      10010010297.538.72
      1.5151510 to 1210 N・10K22.525.518.75182914715.11
      1610 to 1310 N・11 N・10K242720.2519.516.74
      1810 to 1510 N to 13 N
      10K
      273023.252220.08
      2010 to 1610 N to 14 N
      10K
      303326.252423.51
      2412 to 1912 N to 17 N363932.252830.56
      2512 to 2112 N to 18 N37.540.533.753032.39
      2612 to 2212 N to 19 N394235.253231.16
      2815 to 2515 N to 19 N424538.253634.58
      3015 to 2615 N to 23 N454841.253837.84
      3215 to 2815 N to 24 N485144.254041.03
      3515 to 2915 N to 26 N52.555.548.754246.51
      3615 to 3115 N to 28 N545750.254548.00
      4015 to 3515 N to 31 N606356.255054.90
      4518 to 3518 N to 31 N67.570.563.7563.90
      48727568.2569.20
      5018 to 4218 N to 38 N757871.256072.69
      6020 to 4220 N to 38 N909386.2590.68
      70105108101.25108.59
      [!] Shaft bore diameter 6.35 is available for Straight Bore and Straight Bore + Tap. [NG] Shaft bore diameter 9N is not available for Keyway Bore + Tap.
      [ ! ] Specify 10K as P dimension if keyway width of 4.0 mm (height 1.8 mm) for Keyway + Tap with shaft bore diameter of 10 is desired.
      *1 Allowable Transmission Forces in the table are reference values calculated with prescribed conditions.
      ■Module 2.0, 2.5, 3.0
      Part NumberNumber of TeethBGear
      Shape
      Shaft Bore Dia. PH7 (1 mm Increments)d
      Reference Circle
      Dia.
      D
      Addendum Circle
      Dia.
      G
      Dedendum Circle
      Dia.
      HL12* 1 Allowable Transmission Force
      (N⋅m)
      Bending Strength
      TypeModuleStraight Bore
      Straight Bore + Tap
      Keyway
      Keyway + Tap
      Straight Bore
      (Shape A, Shape B)
      GEAHBH

      Straight Bore + Tap
      (Shape B)
      GEABH

      Keyway
      (Shape A)
      Keyway + Tap
      (Shape B)
      GEAKBH
      2.01520A

      B
      12 to 1712 N to 14 N303425243616835.81
      1612 to 1812 N to 15 N3236272639.67
      1812 to 2112 N to 18 N3640313047.59
      2015 to 2215 N to 19 N4044353250.67
      224448393658.24
      2415 to 2615 N to 23 N4852433865.86
      2515 to 2815 N to 24 N5054454069.81
      2815 to 3115 N to 28 N5660514581.96
      3018 to 3518 N to 31 N6064555089.70
      3264685997.27
      36727667113.78
      4020 to 4220 N to 38 N80847560130.13
      45909485151.46
      489610091164.04
      5025 to 4225 N to 38 N10010495172.31
      6025 to 4525 N to 42 N12012411565205.60
      2.5162515 to 2215 N to 19 N404533.75324318970.43
      2018 to 2818 N to 24 N505543.754098.97
      2418 to 3318 N to 30 N606553.7548128.63
      2520 to 3520 N to 31 N62.567.556.2550136.34
      2820 to 4220 N to 38 N707563.7560160.07
      3020 to 4520 N to 42 N758068.7565175.19
      3620 to 4920 N to 45 N909583.7570222.23
      4025 to 4925 N to 45 N10010593.75254.16
      4525 to 5225 N to 49 N112.5117.5106.2575295.82
      48120125113.75306.46
      5025 to 5625 N to 50 N125130118.7580321.92
      3.0163016 to 2616 N to 23 N485440.538502010121.71
      2020 to 3520 N to 31 N606652.550171.01
      2420 to 4020 N to 37 N727864.558222.27
      2520 to 4220 N to 38 N758167.560235.60
      3025 to 5225 N to 49 N909682.575302.72
      329610288.5328.27
      3625 to 5625 N to 50 N108114100.580384.01
      40120126112.5420.10
      *1 Allowable Transmission Forces in the table are reference values calculated with prescribed conditions. [!]The "-" text in the above table means that it is not selectable.

      Alterations

      AlterationsSet Screw AlterationSide Through HoleSide Tapped Hole
      CodeKC90KC120KFC·KTCQFC·QTC
      Spec.Adds another set screw at 90° position. 
      A set screw is added.
      [NG] Not applicable to Straight Bore Type

       
      Adds another set screw at 120° position.
      A set screw is added.
      [NG] Not applicable to Straight Bore Type

       
      Machines through holes on the side surface.
      (KFC, KTC: 1 mm Increments, K: 0.5 mm Increments)
      [ ! ] Applicable only to Shape A [ ! ] P + K + 4 ≤ KFC (KTC) ≤ G - K - 4
      Select K K3.0 to K6.0 Ordering Code KFC20 to K3.5
      Machines tapped holes on the side surface of the gear. (QFC, QTC: 1 mm Increments)
      [ ! ] Applicable only to Shape A [ ! ] P + M + 4 ≤ QFC (QTC) ≤ G - M - 4
      Select M M3 M4 Ordering Code QFC25-M3
      " ! " Tapped Hole Depth M × 1.5 (When B < M × 1.5, through)

      Lista de números de pieza

      Número de artículos
      Número de pieza
      GEAKBH1.5-32-15-A-15N-QFC30-M3

      Number of Teeth

      (Teeth)

      Shape

      Shaft Bore Dia.

      (Ø)

      Tooth Width B

      (mm)

      Hole Shape

      RoHS?Cantidad mínima de pedido
      32
      Shape A
      15
      15
      Keyway
      10
      1 piezas
      Precio unitario (IVA no incluidos)(precio unitario IVA incluidos)
      Fecha de envío estándar
      -
      (
      -
      )
      -

      Información detallada

      Contorno y especificaciones

      General Information - Spur Gears

      Spur gears - front gear with through hole - spur gear with spring pin - spur gear made of brass - brass pinion - plastic - spur gear with ball bearing

       

      Selection details of spur gears

      - Material: steel, stainless steel, sintered steel, nylon, polyacetal, brass, aluminum, cast iron

      - Coatings: burnished, nickel-plated

      - Heat treatment: induction hardened

      - Shaft diameter tolerances: H7, H8

      - Tooth flank clearance: N5, N7, N8, N9, N12

      - Module: 0.3, 0.5, 0.75, 0.8, 1, 1.25, 1.5, 2, 2.5, 3, 4, 4.5, 5, 6, 8, 10, 15, 20

      - Pressure angle: 20°

      - Shaft diameter: 2 mm to 50 mm

      - Number of teeth: 8 to 200

      - Tooth width: 2 mm to 90 mm

       

      Description/Basics

      The spur gears offered are generally machine elements that serve the non-slip transmission of force, movement transmission or movement change. The teeth of the cylinder wheels grip each other during transmission and largely roll over the tooth flanks. The tooth shape of the spur gear is convexly shaped in the shaped tooth system. At the beginning of the intervention, a rolling resistance acts on the tooth flank, which becomes a sliding friction in the course of the rotation.

      A combination of gear wheels and rack gears is useful in the construction of rack gear. This allows motor rotary motion or other rotary motion to be converted into linear motion. rack gear boxes are theoretically possible in an endless assembly. Limits here only set the length of the rack gears for the rack gear drive.

      Gear wheels with straight gearing are particularly suitable for the construction of gearboxes. The advantage of straight gearing as opposed to helical gears, is the possibility of transmitting a higher torque. It should be noted that with increasing speed within the transmission ratio or reduction, the torque to be transmitted decreases.

      When designing spur gear pairs, the ratio of the gear ratio (number of teeth) and the module of the respective gear wheels must be observed.
      The backlash is another important factor that must be considered during construction. Reverse play is understood as the result of the play that the change in the direction of rotation of a single gear wheel pair between the teeth. The risk of reverse play can be reduced if either the diameter or the number of teeth of the cogwheel pairing do not deviate too much from one another. If high wear is to be expected due to the pairing of gears, the MISUMI online shop offers gears with a hardened key-type.

      For applications with the same rotational direction, it is possible to use an intermediate gear with integrated bearing on a cantilever shaft. The bearing number used can be found under the tab More Information. An overview of tolerances and permissible radial bearing deviations can be found in the following PDF.

      In addition to gear wheels, MISUMI also offers suitable rotary shafts for the construction of a transmission. The straight front wheels can be assembled on these and secured with a set screw or machine keys (key with adjusting screw). This PDF provides an overview of the configurable mountings for the shaft rotation and keyway tolerances.
      The continuous adjusting of a spur gear can be realized, among other things, by means of a clamping sleeve. The MISUMI online shop offers spur gears with clamping sleeve. Alternatively, we also offer individual keyless bushing that you can customize to your needs.

       

      Application Examples - Spur Gears

      Application example: workpiece transport - spur gear - rack gear - roller bearings - workpiece

      Application example - spur gear with rack gear
      (1) Spur gear, (2) Clamping knobs, (3) Rack gear

      Application example: rack gear - spur gear with rack gear - handle - rotary handle

      Application example - spur gear
      (1) Spur gear, (2) Workpiece, (3) Rollers

       

      Industrial Applications

      3D printer industry
      Automotive industry
      Pharmaceutical industry
      Packaging industry

      No se han encontrado productos similares para este artículo.
      Se ha confirmado el número de pieza