Registro

¡Estamos traduciendo nuestra tienda online al español! 

Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Condiciones del filtro
  • Stock
  • Compatible Extrusion Width (mm)
  • Material
  • Cover Mounting Hole Addition Work
  • Accessories
  • Type
  • CAD
  • Días estimados de envío
    • Todo
    • Posible envío el mismo día
    • En el plazo de 5 días laborables
    • MISUMI

    8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Extruded Extra Thick Bracket for 50 Square

    8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Extruded Extra Thick Bracket for 50 Square

    Número de pieza:

    Sin liquidar. 21 candidatos encontrados.
    Cantidad:

    Plano de contorno y tabla de especificaciones

    For 50 Square

    NBLUW8－50
    HBLUW8－50

    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets for 50 Square: Related Image
    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets for 50 Square: Related Image

    [ ! ] Both sides and screw holes of NBLUW8-50 are not anodized.

    Type[M] Material[S] Surface Treatment
    NBLUW8−50EN AW−6063−T5 Equiv.Anodize [ ! ]
    HBLUW8−50EN AW−6061−T5 Equiv.

    Specification Table

    Part Number
    NBLUW8−50
    HBLUW8−50
    Part NumberMass
    (g)    		Applicable Extrusion
    Series    		Applicable Screw, T NutAllowable Load
    (N)
    ScrewsQuantityT NutQuantity
    NBLUW8−50223HFS8−5050CBM8−152HNTT8−842793
    CBM8−25
    HBLUW8−50HFS8−5050CBM8−15
    CBM8−25

    Alterations

    Part Number—(C·SET·SST·SEU·SSU·SEP·SSP·SEC)
    NBLUW8−50—SET
    HBLUW8−50—C－SET
    AlterationsCodeSpec.Applicable Bracket
    Mounting Hole
    Alteration for Cover    		CAdds taps on a bracket for cover mounting.
    (M5 on Both Sides)
    (Mounting Screw HCBM)
    * Tapping Direction: For HBLTS845−6□, tapping is only applied on the narrow side of the offset.
    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets for 50 Square: Related Image    		HBLTSW8
    HBLTS845−6 L*
    HBLTS845−6R*
    HBLTS8−50
    HBLUW8−50
    HBLUW8−60
    AlterationsCodeSpec.Applicable Bracket
    Applicable Screws and Nuts SetSET
    SST
    (Stainless Steel)
    SEU
    (Pre-Assembly Insertion
    Spring Nuts)
    SSU
    (Pre-Assembly Insertion
    Spring Nuts
    Stainless steel)
    SEP
    (Post-Assembly Insertion
    Spring Nuts)
    SSP
    (Post-Assembly
    Spring Nut
    Stainless steel)
    SEC
    (Captured Washer
    Screws /
    Nuts)    		Applicable screws and nuts for fixing the brackets on extrusions come in a set.

    Example: When HBLTSW8 is specified
     ScrewsNut
    CodePart NumberQuantityPart NumberQuantity
    SETCBM8－204HNTT8－84
    SSTSCB8－20HNTTSN8－8
    SEUCBM8－20HNTU8－8
    SSUSCB8－20SHNTU8－8
    SEPCBM8－20HNTP8－8
    SSPSCB8－20SHNTP8－8
    SECHCBST8－24HNTT8－8
    [ ! ] When specifying other than HBLTSW8, check for the applicable screws and nuts respectively.    		—
    HBLTSW8
    HBLTS845−6 L
    HBLTS845−6R
    HBLTS8−50
    NBLUW8−50
    HBLUW8−50
    NBLUW8−60
    HBLUW8−60
    [ ! ] Included Screw is not RoHS compliant when -SET, -SEU or -SEP is specified.

    Alteration Details

    ■Mounting Hole Alteration for Cover (-C)

    M5 tapped holes can be added on both sides.
    Alteration part number example: HBLUW8-50-C

     

    ■Set of applicable Screws and Nuts Details

    Alteration Part NumberScrewsScrewsNut
    Part NumberMaterialQty.Part NumberMaterialQty.TypePart NumberMaterialStopperQty.
    SETCBM8-15Steel2CBM8-25Steel2Pre-AssemblyHNTT8-8SteelNot Provided4
    SSTSCB8-15Stainless Steel2SCB8-25Stainless Steel2Pre-AssemblyHNTTSN8-8Stainless SteelNot Provided4
    SEUCBM8-15Steel2CBM8-25Steel2Pre-AssemblyHNTU8-8SteelProvided4
    SSUSCB8-15Stainless Steel2SCB8-25Stainless Steel2Pre-AssemblySHNTU8-8Stainless SteelProvided4
    SEPCBM8-15Steel2CBM8-25Steel2Post-AssemblyHNTP8-8SteelProvided4
    SSPSCB8-15Stainless Steel2SCB8-25Stainless Steel2Post-AssemblySHNTP8-8Stainless SteelProvided4

    Product Features

    Extruded Brackets: Made by aluminum extrusion. Basically anodized.

     

    Similar Products

    ■8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Brackets

    SeriesExtruded ultra thick
    Brackets    		Extruded Thick BracketsExtrusion Unequal Sided
    Brackets    		Assembly Brackets for Different Extrusion SizesThin Brackets Triangle
    Brackets
    Image

    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets, Related Image 1_Similar Products

    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets, Related Image 2_Similar Products

    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets, Related Image 3_Similar Products

    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets, Related Image 4_Similar Products

    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets, Related Image 5_Similar Products

    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets, Related Image 6_Similar Products

    FeaturesExtruded bracket with 2 mounting holes on one side. Enabling secure connection.Made of the same material as aluminum extrusions with anodizing. Suitable when appearance well balanced with the extrusions is desired.The vertical and horizontal lengths are unequal to each other. Usable where space is narrow.Staggered mounting holes. Brackets to connect 45 and 30 square Extrusions.The brackets do not protrude from extrusion widths when used to cross connect extrusions. Suitable for use in limited space.Brackets with 2 mounting holes on one side. Enabling more secure connection of extrusions
    Allowable Load279320582572-16663087
    Applicable Extrusion Width (mm)For 50 Square (This Product) /
    For 60 Square    		For 45 Square / 50 SquareFor 40 Square (for 45 Square)For 30 Square to 45 Square ConnectionFor 45 SquareFor 45 Square

    Technical Information

    ■Perpendicularity

    Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.
    (Common to the 8 Series and 8-45 Series, Perpendicularity 0.03 and 0.06 are available.)

     

    ■How to Specify Allowable Load of Bracket

     
    8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets, Related Image 1_Technical Information
    This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
    Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.
     

    ■Mechanical Properties of Aluminum Extrusions (JIS standard as reference)

    TypeNBLUW8-50HBLUW8-50
    Material (JIS Symbol)EN AW−6063−T5 Equiv.EN AW−6061−T5 Equiv.
    Tensile Strength (N/mm2)155 or more245 or more
    Yield Stress (N/mm2)110 or more205 or more
    Young's Modulus (N/mm2)6997269972
    Brinell Hardness (HB)8888
    Surface TreatmentAnodize 9 µm or moreAnodize 9 µm or more

    Lista de números de pieza

    Número de artículos
  • 1
    • Número de pieza
    HBLUW8-50
    HBLUW8-50-C
    HBLUW8-50-C-SEP
    HBLUW8-50-C-SET
    HBLUW8-50-C-SEU
    HBLUW8-50-C-SSP
    HBLUW8-50-C-SST
    HBLUW8-50-C-SSU
    HBLUW8-50-SEP
    HBLUW8-50-SET
    HBLUW8-50-SEU
    HBLUW8-50-SSP
    HBLUW8-50-SST
    HBLUW8-50-SSU
    NBLUW8-50
    NBLUW8-50-SEP
    NBLUW8-50-SET
    NBLUW8-50-SEU
    NBLUW8-50-SSP
    NBLUW8-50-SST
    NBLUW8-50-SSU

    Compatible Extrusion Width

    (mm)

    Material

    Cover Mounting Hole Addition Work

    Accessories

    		RoHS?Cantidad mínima de pedido
    -
    EN AC-51400-T5 Equiv.
    Not Provided
    Not Provided
    10
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    C (Tap for Cover Mounting)
    Not Provided
    10
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    C (Tap for Cover Mounting)
    SEP (Screw, Post-Assembly Insertion Spring Nut Set)
    -
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    C (Tap for Cover Mounting)
    SET (Screw, Nut Set)
    -
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    C (Tap for Cover Mounting)
    SEU (Screw, Pre-Assembly Insertion Spring Nut Set)
    -
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    C (Tap for Cover Mounting)
    SSP (Stainless Steel Screw, Post-Assembly Insertion Spring Nut Set)
    10
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    C (Tap for Cover Mounting)
    SST (Stainless Steel Screw and Nut Set)
    10
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    C (Tap for Cover Mounting)
    SSU (Stainless Steel Screw, Pre-Assembly Insertion Spring Nut Set)
    10
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    Not Provided
    SEP (Screw, Post-Assembly Insertion Spring Nut Set)
    -
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    Not Provided
    SET (Screw, Nut Set)
    -
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    Not Provided
    SEU (Screw, Pre-Assembly Insertion Spring Nut Set)
    -
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    Not Provided
    SSP (Stainless Steel Screw, Post-Assembly Insertion Spring Nut Set)
    10
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    Not Provided
    SST (Stainless Steel Screw and Nut Set)
    10
    1 piezas
    -
    EN AC-51400-T5 Equiv.
    Not Provided
    SSU (Stainless Steel Screw, Pre-Assembly Insertion Spring Nut Set)
    10
    1 piezas
    50
    EN AW-6063-T5 Equiv.
    Not Provided
    Not Provided
    10
    1 piezas
    50
    EN AW-6063-T5 Equiv.
    Not Provided
    SEP (Screw, Post-Assembly Insertion Spring Nut Set)
    -
    1 piezas
    50
    EN AW-6063-T5 Equiv.
    Not Provided
    SET (Screw, Nut Set)
    -
    1 piezas
    50
    EN AW-6063-T5 Equiv.
    Not Provided
    SEU (Screw, Pre-Assembly Insertion Spring Nut Set)
    -
    1 piezas
    50
    EN AW-6063-T5 Equiv.
    Not Provided
    SSP (Stainless Steel Screw, Post-Assembly Insertion Spring Nut Set)
    10
    1 piezas
    50
    EN AW-6063-T5 Equiv.
    Not Provided
    SST (Stainless Steel Screw and Nut Set)
    10
    1 piezas
    50
    EN AW-6063-T5 Equiv.
    Not Provided
    SSU (Stainless Steel Screw, Pre-Assembly Insertion Spring Nut Set)
    10
    1 piezas
    Precio unitario (IVA no incluidos)(precio unitario IVA incluidos)
    Fecha de envío estándar
    9.83 €
    3.05 €

    (
    3.63 €
     )
    Artículo en stock: 1 día laborableDisponible para envío el mismo día
    10.20 €
    (
    12.14 €
     )
    5 días laborables
    13.65 €
    (
    16.24 €
     )
    5 días laborables
    13.00 €
    (
    15.47 €
     )
    5 días laborables
    13.65 €
    (
    16.24 €
     )
    5 días laborables
    14.26 €
    (
    16.97 €
     )
    5 días laborables
    13.25 €
    (
    15.77 €
     )
    5 días laborables
    15.33 €
    (
    18.24 €
     )
    5 días laborables
    13.27 €
    (
    15.79 €
     )
    5 días laborables
    12.63 €
    (
    15.03 €
     )
    5 días laborables
    13.27 €
    (
    15.79 €
     )
    5 días laborables
    13.87 €
    (
    16.51 €
     )
    5 días laborables
    12.86 €
    (
    15.30 €
     )
    5 días laborables
    14.94 €
    (
    17.78 €
     )
    5 días laborables
    8.82 €
    (
    10.50 €
     )
    5 días laborables
    12.26 €
    (
    14.59 €
     )
    5 días laborables
    11.62 €
    (
    13.83 €
     )
    5 días laborables
    12.26 €
    (
    14.59 €
     )
    5 días laborables
    12.86 €
    (
    15.30 €
     )
    5 días laborables
    11.86 €
    (
    14.11 €
     )
    5 días laborables
    13.93 €
    (
    16.58 €
     )
    5 días laborables
  • 1

    • Información detallada

    Información básica


    Extruded, extra thick bracket for frames series 8-45, square 50.

    Información técnica