Condiciones del filtro
- Nut type
- Straight
- Flange Type
- Compact Flanged
- Round Flanged
- Shaft O.D. D(φ)
- 6
- 8
- 10.4
- 13.4
- 16.6
- 20.6
- 25.8
- 30.8
- Shaft material
- Nut Overall Length(mm)
- 25
- 33
- 36
- 40
- 44
- 50
- 63
- 71
- 80
- Nut O.D.(φ)
- 14
- 16
- 21
- 24
- 31
- 35
- 42
- 47
- Shaft Overall Length L(mm)[60-1150/1mm unidades]
- Nut Material
- Grease
- B(mm)[2-120/1mm unidades]
- E(mm)[4-125/1mm unidades]
- F(mm)[4-125/1mm unidades]
- M(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- 24
- N(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- 24
- P(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 20
- 25
- Q(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 20
- 25
- S(mm)[2-120/1mm unidades]
- CAD
- 2D
- 3D
- Días estimados de envío
- Todo
- En el plazo de 9 días laborables
- En el plazo de 10 días laborables
- En el plazo de 11 días laborables
- En el plazo de 12 días laborables
Ball Splines / Both Ends Stepped and Threaded
Número de pieza:
candidatos encontrados.Plano de contorno y tabla de especificaciones
| Both Ends Stepped and Threaded | Spline Shafts [ M ] EN 1.3505 Equiv. Nut [ M ] EN 1.7242 Equiv. [ H ] Hardness: 58HRC ~ | Spline Shaft, Nut [ M ] Material: EN 1.4125 Equiv. [ H ] Hardness: 55HRC ~ |
| Nut 1 pc. | Nut 1 pc. | |
| With Round Flange Nut | BSYM | BSYMS |
| With Compact Flange Nut | BSYN | - |
| With Straight Nut | BSYS | BSYSS |
Specifications
| Part Number | - | L | - | F | - | E | - | B | - | S | - | P | - | Q | - | M | - | N |
BSYS8 BSYS8G BSYS8L | - - - | 250 250 250 | - - - | F20 F20 F20 | - - - | E20 E20 E20 | - - - | B8 B8 B8 | - - - | S8 S8 S8 | - - - | P6 P6 P6 | - - - | Q6 Q6 Q6 | - - - | M6 M6 M6 | - - - | N6 N6 N6 |
■ Spline Shafts
[ ! ] For BSYMS and BSYSS, only * marked sizes are available, and the Max. L and Y dimensions are in ( ).
[ ! ] For BSYN, only No. 6, 8 and 10 are available.
■ Round Flange Nuts, Compact Flange Nuts
Dimensions in ( ) are for EN 1.4125 Equiv. Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.
■ Straight Nuts
Dimensions in ( ) are for EN 1.4125 Equiv. Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.
| Part Number | 1mm Increment | P, Q Selection | M (Coarse) / N (Coarse) Selection (M≤P, N≤Q) | D | (Y) | Mass (kg/m) | |||||||||||||||||||||||
| Type | No. | L | F, E | B, S | 1-Nut Type | ||||||||||||||||||||||||
| 1-Nut Type | min~max | ||||||||||||||||||||||||||||
| BSYM BSYN BSYS BSYMS BSYSS | *6 | 60~400(190) | When P, Q=3 4≤F, E≤9 When P, Q=4 4≤F, E≤16 When P, Q≥5 4≤F, E≤P, Qx5 [ ! ] F, E≥B, S+2 | When M, N=3 2≤B, S≤M, Nx3 When M, N=4 2≤B, S≤M, Nx4 When M, N≥5 2≤B, S≤M, Nx5 [ ! ] B • S≥Pitchx3+ ℓ [ ! ] For Stainless Steel materials,M, N≤B, S≤M, Nx3 | 3 | 4 | 5 | 3 | 4 | 5 | 6 | 52~392(182) | 0.23 | ||||||||||||||||
| *8 | 60~400(190) | 4 | 5 | 6 | 4 | 5 | 6 | 8 | 52~392(182) | 0.39 | |||||||||||||||||||
| *10 | 60~600(390) | 4 | 5 | 6 | 8 | 4 | 5 | 6 | 8 | 10.4 | 52~592(382) | 0.65 | |||||||||||||||||
| *13 | 60~600(390) | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | 13.4 | 52~592(382) | 1.11 | |||||||||||||||||
| *16 | 70~600(390) | 5 | 6 | 8 | 10 | 12 | 13 | 6 | 8 | 10 | 12 | 16.6 | 62~592(382) | 1.65 | |||||||||||||||
| 20 | 80~700 | 8 | 10 | 12 | 13 | 15 | 16 | 6 | 8 | 10 | 12 | 16 | 20.6 | 72~692 | 2.57 | ||||||||||||||
| 25 | 90~900 | 8 | 10 | 12 | 13 | 15 | 16 | 20 | 6 | 8 | 10 | 12 | 16 | 20 | 25.8 | 82~892 | 4.04 | ||||||||||||
| 30 | 100~1150 | 10 | 12 | 13 | 15 | 16 | 20 | 25 | 8 | 10 | 12 | 16 | 20 | 24 | 30.8 | 92~1142 | 5.85 | ||||||||||||
[ ! ] For BSYN, only No. 6, 8 and 10 are available.
■ Round Flange Nuts, Compact Flange Nuts
| No. | D (h6) | L | Df | H | P.C.D. | d1 | d2 | h | W | d | B | Basic Rated Torque | Basic Load Rating | Allowable Static Moment | Mass (kg) | |||
| Dynamic Ct (N • m) | Static C0t (N • m) | Dynamic C (kN) | Static C0 (kN) | M01 (N • m) | M02 (N • m) | |||||||||||||
| 6 | 14 | 25 | 30 | 6 | 22 | 3.5 | 6 | 3.1 | 6.5 | 1.5 | 18 | 3.8 | 7 | 1.2 | 2.1 | 5 | 36 | 0.03 |
| 8 | 16 | 32 | 24 | 21 | 4.8 | 8.7 | 1.2 | 2.1 | 5 | 36 | 0.04 | |||||||
| 10 | 21 | 40(33) | 42(41) | 6(8) | 32(30) | 4.5 | 8 | 4.4(5.3) | 14(8.5) | 25 | 19(11) | 34(21) | 3.8(2.4) | 6.9(4.3) | 26(15) | 181(102) | 0.09 | |
| 13 | 24 | 44(36) | 44(45) | 7(8) | 33(34) | 15(10) | - | 28(20) | 52(37) | 4.6(3.3) | 8.3(5.9) | 36(22) | 251(148) | 0.11 | ||||
| 16 | 31 | 50 | 51 | 7 | 40 | 4.4 | 18 | 51 | 93 | 6.2 | 11.1 | 56 | 386 | 0.2 | ||||
| 20 | 35 | 63 | 58 | 9 | 45 | 5.5 | 9.5 | 5.4 | 22.5 | 2 | 85 | 154 | 8.5 | 15.3 | 83 | 611 | 0.3 | |
| 25 | 42 | 71 | 65 | 52 | 26.5 | 193 | 348 | 15.4 | 27.7 | 173 | 1248 | 0.4 | ||||||
| 30 | 47 | 80 | 75 | 10 | 60 | 6.6 | 11 | 6.5 | 30 | 2.5 | 272 | 490 | 18.5 | 33.3 | 212 | 1581 | 0.57 | |
■ Straight Nuts
| No. | D (h6) | L | b | t (+0.05( 0 | d | α | Basic Rated Torque | Basic Load Rating | Allowable Static Moment | Mass (kg) | Dimensions of Key (Included) | |||||||||
| Tolerance | Dynamic Ct (N • m) | Static C0t (N • m) | Dynamic C (kN) | Static C0 (kN) | M01 (N • m) | M02 (N • m) | B | h | L1 | R | ||||||||||
| Tolerance | Tolerance | |||||||||||||||||||
| 6 | 14 | 25 | 2.5 | +0.014 0 | 1.2 | 1.5 | 15° | 3.8 | 7 | 1.2 | 2.1 | 5 | 36 | 0.012 | 2.5 | +0.016 +0.006 | 2.5 | 0 -0.025 | 10.5 | 1.25 |
| 8 | 16 | 25° | 4.8 | 8.7 | 1.2 | 2.1 | 5 | 36 | 0.013 | 10.5 | ||||||||||
| 10 | 21 | 40(33) | 3 | 1.5 | - | 19(11) | 34(21) | 3.8(2.4) | 6.9(4.3) | 26(15) | 181(102) | 0.06 | 3 | 3 | 17(14) | 1.5 | ||||
| 13 | 24 | 44(36) | 28(20) | 52(37) | 4.6(3.3) | 8.3(5.9) | 36(22) | 251(148) | 0.07 | 17(14) | ||||||||||
| 16 | 31 | 50 | 3.5 | +0.018 0 | 2 | 51 | 93 | 6.2 | 11.1 | 56 | 386 | 0.15 | 3.5 | +0.024 +0.012 | 3.5 | 0 -0.030 | 18 | 1.75 | ||
| 20 | 35 | 63 | 4 | 2.5 | 2 | 85 | 154 | 8.5 | 15.3 | 83 | 611 | 0.2 | 4 | 4 | 29 | 2 | ||||
| 25 | 42 | 71 | 193 | 348 | 15.4 | 27.7 | 173 | 1248 | 0.29 | 33 | ||||||||||
| 30 | 47 | 80 | 2.5 | 272 | 490 | 18.5 | 33.3 | 212 | 1581 | 0.37 | 42 | |||||||||
Alterations
Lista de números de pieza
Número de artículos
| Número de pieza |
|---|
Precio unitario (IVA no incluidos)(precio unitario IVA incluidos) | Fecha de envío estándar |
|---|
- ( - ) | 10 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 10 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 10 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 10 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 10 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 10 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 10 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 10 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 12 días laborables |
- ( - ) | 9 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 9 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 9 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 9 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 9 días laborables |
- ( - ) | 11 días laborables |
- ( - ) | 11 días laborables |
Información detallada
Información básica
Precaución
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Contorno y especificaciones
More Information
