Linear shafts / stepped on both sides, internal thread

Linear shafts / stepped on both sides, internal thread

Click on this image to zoom in.

Click on this image to zoom in.

  • Linear shafts / stepped on both sides, internal thread
  • Linear shafts / stepped on both sides, internal thread
  • Order quantities extended (D-JIT)

(i)Remark

  • SFAH has been localized according to European needs and requirements. Please have a look on the EU version SFAHEU. SFAHEU is available in EN 1.1213 (Cf53) and h6 / h7.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

 

Both Ends Stepped and Tapped/Both Ends Stepped:Related Image

 

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

 

TypeMaterialHardness
Surface Treatment
Both Ends Stepped and TappedBoth Ends Stepped
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. h5D Tol. f8
SFAHSFUH-SFAJSFUJ-EN 1.3505 Equiv.Effective Hardened Depth of Induction Hardening >>P.112
EN 1.3505 Equiv. 58HRC~
EN 1.4037 Equiv. 56HRC~
-
SSFAHSSFUH-SSFAJSSFUJ-EN 1.4037 Equiv.
PSFAHPSFUH-PSFAJPSFUJ-EN 1.3505 Equiv.Hard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More
PSSFAHPSSFUH-PSSFAJPSSFUJ-EN 1.4037 Equiv.
RSFAH--RSFAJ--EN 1.3505 Equiv.LTBC Plating
EN 1.4037 Equiv.
--PSFGH--PSFGJEN 1.1191 Equiv.-Hard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 10µ or More
--PSSFGH--PSSFGJEN 1.4301 Equiv.

 

Further specifications can be found under the tab More Information.

 

Composition of a Product Code - Linear Shafts

 

Part Number-L-F-P-M-T
SSFAH18
SFAH20
SFAJ20
-
-
-
200
400
400
-
-
-
F20
F25
F25
-
-
-
P15
P16
P16
-
-

 
M8
M10

 
-
-
-
T20
T20
T20

 

Alterations - Linear Shafts


Both Ends Stepped and Tapped/Both Ends Stepped:Related Image

You find further options in detail under Option Overview.

 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
PSFAH8-[25-996/1]-F[2-24/1]-P6-M3-T[2-24/1]
PSFAH10-[25-996/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-32/1]
PSFAH12-[25-1196/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-T[2-40/1]
PSFAH13-[25-1196/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-T[2-44/1]
PSFAH15-[25-1196/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-T[2-52/1]
PSFAH15-[25-1196/1]-F[2-52/1]-P[6-13/1]-MD[6,​8,​10]-T[2-52/1]
PSFAH16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-T[2-56/1]
PSFAH18-[25-1196/1]-F[2-64/1]-P[8-16/1]-M[4,​5,​6,​8,​10,​12]-T[2-64/1]
PSFAH20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-T[2-68/1]
PSFAH25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-T[2-88/1]
PSFAH25-[25-1196/1]-F[2-88/1]-P[8-22/1]-MD[6,​8,​10,​12,​16]-T[2-88/1]
PSFAH30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-108/1]
PSFAH30-[25-1496/1]-F[2-108/1]-P[9-27/1]-MD[6,​8,​10,​12,​16,​20]-T[2-108/1]
PSFAH35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-128/1]
PSFAH40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-148/1]
PSFAH50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-188/1]
PSFAJ8-[25-996/1]-F[2-24/1]-P6-T[2-24/1]
PSFAJ10-[25-996/1]-F[2-32/1]-P[6-8/1]-T[2-32/1]
PSFAJ12-[25-1196/1]-F[2-40/1]-P[6-10/1]-T[2-40/1]
PSFAJ13-[25-1196/1]-F[2-44/1]-P[6-11/1]-T[2-44/1]
PSFAJ15-[25-1196/1]-F[2-52/1]-P[6-13/1]-T[2-52/1]
PSFAJ16-[25-1196/1]-F[2-56/1]-P[6-14/1]-T[2-56/1]
PSFAJ18-[25-1196/1]-F[2-64/1]-P[8-16/1]-T[2-64/1]
PSFAJ20-[25-1196/1]-F[2-68/1]-P[8-17/1]-T[2-68/1]
PSFAJ25-[25-1196/1]-F[2-88/1]-P[8-22/1]-T[2-88/1]
PSFAJ30-[25-1496/1]-F[2-108/1]-P[9-27/1]-T[2-108/1]
PSFAJ35-[25-1496/1]-F[2-128/1]-P[9-32/1]-T[2-128/1]
PSFAJ40-[25-1496/1]-F[2-148/1]-P[11-37/1]-T[2-148/1]
PSFAJ50-[25-1496/1]-F[2-188/1]-P[11-47/1]-T[2-188/1]
PSFGH8-[25-796/1]-F[2-24/1]-P6-M3-T[2-24/1]
PSFGH10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-32/1]
PSFGH12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-T[2-40/1]
PSFGH13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-T[2-44/1]
PSFGH15-[25-1196/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-T[2-52/1]
PSFGH15-[25-1196/1]-F[2-52/1]-P[6-13/1]-MD[6,​8,​10]-T[2-52/1]
PSFGH16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-T[2-56/1]
PSFGH18-[25-1196/1]-F[2-64/1]-P[8-16/1]-M[4,​5,​6,​8,​10,​12]-T[2-64/1]
PSFGH20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-T[2-68/1]
PSFGH25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-T[2-88/1]
PSFGH25-[25-1196/1]-F[2-88/1]-P[8-22/1]-MD[6,​8,​10,​12,​16]-T[2-88/1]
PSFGH30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-108/1]
PSFGH30-[25-1496/1]-F[2-108/1]-P[9-27/1]-MD[6,​8,​10,​12,​16,​20]-T[2-108/1]
PSFGH35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-128/1]
PSFGH40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-148/1]
PSFGH50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-188/1]
PSFGJ8-[25-796/1]-F[2-24/1]-P6-T[2-24/1]
PSFGJ10-[25-796/1]-F[2-32/1]-P[6-8/1]-T[2-32/1]
PSFGJ12-[25-996/1]-F[2-40/1]-P[6-10/1]-T[2-40/1]
PSFGJ13-[25-996/1]-F[2-44/1]-P[6-11/1]-T[2-44/1]
PSFGJ15-[25-1196/1]-F[2-52/1]-P[6-13/1]-T[2-52/1]
PSFGJ16-[25-1196/1]-F[2-56/1]-P[6-14/1]-T[2-56/1]
PSFGJ18-[25-1196/1]-F[2-64/1]-P[8-16/1]-T[2-64/1]
PSFGJ20-[25-1196/1]-F[2-68/1]-P[8-17/1]-T[2-68/1]
PSFGJ25-[25-1196/1]-F[2-88/1]-P[8-22/1]-T[2-88/1]
PSFGJ30-[25-1496/1]-F[2-108/1]-P[9-27/1]-T[2-108/1]
PSFGJ35-[25-1496/1]-F[2-128/1]-P[9-32/1]-T[2-128/1]
PSFGJ40-[25-1496/1]-F[2-148/1]-P[11-37/1]-T[2-148/1]
PSFGJ50-[25-1496/1]-F[2-188/1]-P[11-47/1]-T[2-188/1]
PSFUH8-[25-996/1]-F[2-24/1]-P6-M3-T[2-24/1]
PSFUH10-[25-996/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-32/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft)
(mm)
[L] Length (Shaft)
(mm)
Material Heat Treatment Surface Treatment ISO Tolerance Hardness [MD] Size (thread - depth 3xM)
(mm)
[F] Length (stud - offset - front side)
(mm)
[P] Diameter (stepped - front side)
(mm)
[T] Length (stud - stepped - back side)
(mm)
[M] Size (thread - depth 2xM)
(mm)

-

1 4 Days 10Internal threadInternal thread825 ~ 996[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 2462 ~ 243

-

1 4 Days 10Internal threadInternal thread1025 ~ 996[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 326 ~ 82 ~ 323 ~ 5

-

1 4 Days 10Internal threadInternal thread1225 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 406 ~ 102 ~ 403 ~ 6

-

1 4 Days 10Internal threadInternal thread1325 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 446 ~ 112 ~ 443 ~ 8

-

1 4 Days 10Internal threadInternal thread1525 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 526 ~ 132 ~ 523 ~ 10

-

1 4 Days 10Internal threadInternal thread1525 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)6 ~ 102 ~ 526 ~ 132 ~ 52-

-

1 4 Days 10Internal threadInternal thread1625 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 566 ~ 142 ~ 563 ~ 10

-

1 8 Days 10Internal threadInternal thread1825 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 648 ~ 162 ~ 644 ~ 12

-

1 4 Days 10Internal threadInternal thread2025 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 688 ~ 172 ~ 684 ~ 12

-

1 4 Days 10Internal threadInternal thread2525 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 888 ~ 222 ~ 884 ~ 16

-

1 4 Days 10Internal threadInternal thread2525 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)6 ~ 162 ~ 888 ~ 222 ~ 88-

-

1 4 Days 10Internal threadInternal thread3025 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 1089 ~ 272 ~ 1085 ~ 24

-

1 4 Days 10Internal threadInternal thread3025 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)6 ~ 202 ~ 1089 ~ 272 ~ 108-

-

1 8 Days 10Internal threadInternal thread3525 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 1289 ~ 322 ~ 1285 ~ 24

-

1 8 Days 10Internal threadInternal thread4025 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 14811 ~ 372 ~ 1486 ~ 30

-

1 8 Days 10Internal threadInternal thread5025 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 18811 ~ 472 ~ 1886 ~ 30

-

1 4 Days 10StraightStraight825 ~ 996[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 2462 ~ 24-

-

1 4 Days 10StraightStraight1025 ~ 996[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 326 ~ 82 ~ 32-

-

1 4 Days 10StraightStraight1225 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 406 ~ 102 ~ 40-

-

1 4 Days 10StraightStraight1325 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 446 ~ 112 ~ 44-

-

1 4 Days 10StraightStraight1525 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 526 ~ 132 ~ 52-

-

1 4 Days 10StraightStraight1625 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 566 ~ 142 ~ 56-

-

1 8 Days 10StraightStraight1825 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 648 ~ 162 ~ 64-

-

1 4 Days 10StraightStraight2025 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 688 ~ 172 ~ 68-

-

1 4 Days 10StraightStraight2525 ~ 1196[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 888 ~ 222 ~ 88-

-

1 4 Days 10StraightStraight3025 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 1089 ~ 272 ~ 108-

-

1 8 Days 10StraightStraight3525 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 1289 ~ 322 ~ 128-

-

1 8 Days 10StraightStraight4025 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 14811 ~ 372 ~ 148-

-

1 8 Days 10StraightStraight5025 ~ 1496[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingg6Induction Hardening (58HRC~)-2 ~ 18811 ~ 472 ~ 188-

-

1 6 Days 10Internal threadInternal thread825 ~ 796[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 2462 ~ 243

-

1 6 Days 10Internal threadInternal thread1025 ~ 796[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 326 ~ 82 ~ 323 ~ 5

-

1 6 Days 10Internal threadInternal thread1225 ~ 996[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 406 ~ 102 ~ 403 ~ 6

-

1 6 Days 10Internal threadInternal thread1325 ~ 996[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 446 ~ 112 ~ 443 ~ 8

-

1 6 Days 10Internal threadInternal thread1525 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 526 ~ 132 ~ 523 ~ 10

-

1 6 Days 10Internal threadInternal thread1525 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening6 ~ 102 ~ 526 ~ 132 ~ 52-

-

1 6 Days 10Internal threadInternal thread1625 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 566 ~ 142 ~ 563 ~ 10

-

1 8 Days 10Internal threadInternal thread1825 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 648 ~ 162 ~ 644 ~ 12

-

1 6 Days 10Internal threadInternal thread2025 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 688 ~ 172 ~ 684 ~ 12

-

1 6 Days 10Internal threadInternal thread2525 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 888 ~ 222 ~ 884 ~ 16

-

1 6 Days 10Internal threadInternal thread2525 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening6 ~ 162 ~ 888 ~ 222 ~ 88-

-

1 6 Days 10Internal threadInternal thread3025 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 1089 ~ 272 ~ 1085 ~ 24

-

1 6 Days 10Internal threadInternal thread3025 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening6 ~ 202 ~ 1089 ~ 272 ~ 108-

-

1 7 Days 10Internal threadInternal thread3525 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 1289 ~ 322 ~ 1285 ~ 24

-

1 7 Days 10Internal threadInternal thread4025 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 14811 ~ 372 ~ 1486 ~ 30

-

1 7 Days 10Internal threadInternal thread5025 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 18811 ~ 472 ~ 1886 ~ 30

-

1 6 Days 10StraightStraight825 ~ 796[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 2462 ~ 24-

-

1 6 Days 10StraightStraight1025 ~ 796[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 326 ~ 82 ~ 32-

-

1 6 Days 10StraightStraight1225 ~ 996[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 406 ~ 102 ~ 40-

-

1 6 Days 10StraightStraight1325 ~ 996[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 446 ~ 112 ~ 44-

-

1 6 Days 10StraightStraight1525 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 526 ~ 132 ~ 52-

-

1 6 Days 10StraightStraight1625 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 566 ~ 142 ~ 56-

-

1 8 Days 10StraightStraight1825 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 648 ~ 162 ~ 64-

-

1 6 Days 10StraightStraight2025 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 688 ~ 172 ~ 68-

-

1 6 Days 10StraightStraight2525 ~ 1196[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 888 ~ 222 ~ 88-

-

1 6 Days 10StraightStraight3025 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 1089 ~ 272 ~ 108-

-

1 7 Days 10StraightStraight3525 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 1289 ~ 322 ~ 128-

-

1 7 Days 10StraightStraight4025 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 14811 ~ 372 ~ 148-

-

1 7 Days 10StraightStraight5025 ~ 1496[Unalloyed Steel] EN 1.1191 Equiv.No TreatmentHard Chrome Platingf8No Induction Hardening-2 ~ 18811 ~ 472 ~ 188-

-

1 4 Days 10Internal threadInternal thread825 ~ 996[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)-2 ~ 2462 ~ 243

-

1 4 Days 10Internal threadInternal thread1025 ~ 996[Alloyed Steel] EN 1.3505 Equiv.Induction HardenedHard Chrome Platingh5Induction Hardening (58HRC~)-2 ~ 326 ~ 82 ~ 323 ~ 5

Loading...

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

 

Both Ends Stepped and Tapped/Both Ends Stepped:Related Image

 

Specification Tables - Linear Shafts

 

Overview of the shaft designs as PDF

 

D Tol.
Dg6h5f8
8-0.005
-0.014
0
-0.006
-0.013
-0.035
10
12-0.006
-0.017
0
-0.008
-0.016
-0.043
13
15
16
18
20-0.007
-0.020
0
-0.009
-0.020
-0.053
25
30
35-0.009
-0.025
0
-0.011
-0.025
-0.064
40
50
 
Part Number1mm IncrementM (Coarse)
Selection
(Y)Max.RC
TypeDLF, TP
Both Ends Stepped and Tapped
(D Tolerance g6)
SFAH
SSFAH
PSFAH
PSSFAH
RSFAH

(D≤30, L≤500)
(D Tolerance f8)
PSFGH
PSSFGH
(D Tolerance h5)
SFUH
SSFU
H
PSFUH

PSSFUH


 
Both Ends Stepped
(D Tolerance g6)
SFAJ
SSFAJ
PSFAJ
PSSFAJ
RSF
AJ
(D≤30, L≤500)
(D Tol. f8)
PSFGJ
PSSFGJ
(D Tolerance h5)
SFUJ
SSFUJ
PSFUJ
PSSFUJ



 
825~7962≤F≤Px4

2≤T≤Px4
63          8000.3 or Less0.5 or Less
1025~7966~8345        800
1225~9966~103456       1000
1325~9966~1134568      1000
1525~9966~133456810     1000
1625~11966~143456810     1200
1825~11968~16 45681012    1200
2025~11968~17 45681012    12001.0 or Less
2525~11968~22 4568101216   1200
3025~14969~27  5681012162024 1500
3525~14969~32  5681012162024 15000.5 or Less
4025~149611~37   681012162024301500
5025~149611~47   681012162024301500
• Both Ends Tapped P dimensions require M+3≤P. When (Mx2.5+4)x2≥(Y), tap pilot hole may go through.

 

Alterations - Linear Shafts


Both Ends Stepped and Tapped/Both Ends Stepped:Related Image

You find further options in detail under Option Overview.

Basic information

Basic Shape Solid, Both Ends Stepped Shaft end Perpendicularity 0.2

Frequently Asked Questions (FAQ)

Question:

What is the difference between a hollow shaft and a solid shaft?

Answer:

With the same size, there are three differences between a hollow shaft and a solid shaft. Hollow shafts weigh less. The inner cavity of a hollow shaft is suitable for use as a channel (cable channel). Solid shafts are a bit more rigid (higher resistance torque).

Question:

What is the minimum order of linear shafts from MISUMI?

Answer:

MISUMI supplies solid shafts, hollow shafts and precision shafts starting at a lot size of 1. This also applies to all other items in our product range.

Question:

Noises and vibrations occur with a linear shaft. In addition, there are jerky movements. What could cause this?

Answer:

In general, it may be caused if the steel shaft is not properly lubricated. In addition, an incorrectly selected diameter tolerance of the linear shafts may also make the cycle of motion more difficult. When using MISUMI linear ball bearings, a g6 shaft tolerance is recommended (tolerance recommendations may vary depending on the manufacturer).

Question:

What is the strength of a solid shaft?

Answer:

The strength of a linear shaft, although it is a solid shaft, hollow shaft or precision shaft, should always be selected in consideration of the strength of the material used.

Question:

What are the advantages of a hollow shaft over a solid shaft?

Answer:

There are various advantages of a hollow shaft compared to a solid shaft. If the outer diameter is the same, the weight of a hollow shaft is lower than that of a solid shaft. However, the cavity of the hollow shaft can also be used as a cable channel or for cooling. A hollow shaft is at the same weight or with the same cross-sectional area more rigid than a solid shaft, because the outer diameter is larger. However, the question that needs to be answered is whether the advantage is a greater room utilization or less weight.

Question:

Is a hollow shaft stiffer than a solid shaft?

Answer:

The rigidity of a hollow shaft is slightly lower with the same outer diameter than that of a solid shaft. However, with the same cross-sectional area or with the same weight, the stiffness of a hollow shaft is higher than that of a solid shaft, because the outer diameter of the hollow shaft is larger.

Question:

Why do I have running grooves on the linear shafts of my 3D printers?

Answer:

The running grooves on the linear shaft may have been created, for example, by using a linear ball bearing. To prevent grooves from forming on a steel shaft, it should be hardened and hard chromium plated, making it more durable and resistant to the wear and tear from ball bearings.

Question:

How do the flexure properties of hollow shafts and solid shafts differ?

Answer:

With an equally large outer diameter, a solid shaft has better flexure properties than an equally large hollow shaft. However, the solid shaft is not much stiffer than a hollow shaft with the same outer diameter, since the outer sections mainly carry the load. Hollow shafts with the same cross-sectional area are more rigid than solid shafts, because they have a larger outer diameter. Therefore, there is physically more material in the outer sections for the bending, which bears the loads.

Question:

I need a lacquered or matted shaft because reflections cause problems with the optics. Does MISUMI have something like that?

Answer:

MISUMI LTBC-coated linear shafts are an alternative to painted or matted steel shafts. The LTBC coating is low-reflection and has the same effect as painted and matte shafts. In addition, LTBC-coated linear shafts are more resistant to wear and tear and flaking. You can find further information on LTBC coating here .

Question:

It has been shown that a hollow shaft is stronger than a solid shaft made of the same material. Why?

Answer:

A hollow shaft with the same outer dimensions is principally not stronger than a solid shaft. However, a hollow shaft per weight unit is stronger.

Show more FAQ Close

Complementary Products

MISUMI Unit еxample related to this product

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360