Registro
Condiciones del filtro
  • [D] Diameter (Shaft)(mm)
  • [L] Length (Shaft)(mm)
      [25-1493/1mm unidades]
    • Material
      • Alloyed Steel
    • Heat Treatment
    • Surface Treatment
      • ISO Tolerance
      • [SC] Distance (wrench flat)(mm)
          [0-1483/1mm unidades]
        • [NSC] Size (fine thread - depth 2xN)(mm)
        • [MMS] Size (fine thread)(mm)
        • [ND] Size (thread - depth 3xN)(mm)
        • [F] Length (stud - offset - front side)(mm)
            [2-72/1mm unidades]
          • [H](mm)
              [0-500/1mm unidades]
            • [N] Size (thread - depth 2xN)(mm)
            • [M] Size (thread - depth 2xM)(mm)
            • [MMC] Size (fine thread)(mm)
            • CAD
            • Días estimados de envío
              • Todo
              • En el plazo de 12 días laborables

            Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread / undercut / flat / radial bore

            Número de pieza:

            Sin liquidar. 156 candidatos encontrados.
            Cantidad:

            Plano de contorno y tabla de especificaciones

            Back to Linear Shaft Category

            Technical Drawing - Linear Shafts

             

            One End Threaded/One End Tapped with Undercut and Wrench Flats/Cross-Drilled Hole:Related Image

             

            Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

             

            TypeMaterialHardness
            Surface Treatment
            With Wrench FlatsWith Cross-Drilled Hole
            D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. f8
            SAFZSFBU-SAHD-EN 1.3505 Equiv.Effective Hardened Depth of Induction Hardening >>P.112
            EN 1.3505 Equiv. 58HRC~
            EN 1.4037 Equiv. 56HRC~
            -
            SSAFZSSFBU-SSAHD-EN 1.4037 Equiv.
            PSAFZPSFBU-PSAHD-EN 1.3505 Equiv.Hard Chrome Plating
            Plating Hardness: HV750 ~
            Plating Thickness: 5µ or More
            PSSAFZPSSFBU-PSSAHD-EN 1.4037 Equiv.
            RSAFZ--RSAHD-EN 1.3505 Equiv.LTBC Plating
            --PSAGZ-PSHGDEN 1.1191 Equiv.-Hard Chrome Plating
            Plating Hardness: HV750 ~
            Plating Thickness: 10µ or More
            --PSSAGZ--EN 1.4301 Equiv.

             

            D Tol.
            Dg6h5f8
            8-0.005
            -0.014
            0
            -0.006
            -0.013
            -0.035
            10
            12-0.006
            -0.017
            0
            -0.008
            -0.016
            -0.043
            13
            15
            16
            18
            20-0.007
            -0.020
            0
            -0.009
            -0.020
            -0.053
            25
            30
            35-0.009
            -0.025
            0
            -0.011
            -0.025
            -0.064
            40
            50
             

            Further specifications can be found under the tab More Information.

             

            Composition of a Product Code - Linear Shafts

             

            Part Number-L-F-M-N-SC-H
            SAFZ20
            SSAHD20
            -
            -
            277
            277
            -
            -
            F25
            F25
            -
            -
            M10
            M12
            -
            -
            N12
            N12
            -SC10
            -

            H10

             

            Alterations - Linear Shafts


            One End Threaded/One End Tapped with Undercut and Wrench Flats/Cross-Drilled Hole:Related Image

            You find further options in detail under Option Overview.

             

            Lista de números de pieza

            Número de artículos
            Número de pieza

            [D] Diameter (Shaft)

            (mm)

            [L] Length (Shaft)

            (mm)

            Material

            Heat Treatment

            Surface Treatment

            ISO Tolerance

            Hardness

            [SC] Distance (wrench flat)

            (mm)

            [NSC] Size (fine thread - depth 2xN)

            (mm)

            [MMS] Size (fine thread)

            (mm)

            [ND] Size (thread - depth 3xN)

            (mm)

            [F] Length (stud - offset - front side)

            (mm)

            [H]

            (mm)

            [N] Size (thread - depth 2xN)

            (mm)

            [M] Size (thread - depth 2xM)

            (mm)

            [MMC] Size (fine thread)

            (mm)

            RoHS?Cantidad mínima de pedido
            8
            25 ~ 795
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 790
            -
            -
            -
            5 ~ 18
            -
            3 ~ 5
            6
            -
            10
            1 piezas
            8
            25 ~ 795
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 790
            -
            -
            -
            5 ~ 18
            -
            3 ~ 5
            -
            6
            10
            1 piezas
            10
            25 ~ 795
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 780
            -
            -
            -
            5 ~ 24
            -
            3 ~ 6
            6 ~ 8
            -
            10
            1 piezas
            10
            25 ~ 795
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 780
            -
            -
            6
            5 ~ 24
            -
            -
            6 ~ 8
            -
            10
            1 piezas
            10
            25 ~ 795
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 780
            -
            -
            -
            5 ~ 24
            -
            3 ~ 6
            -
            6 ~ 8
            10
            1 piezas
            10
            25 ~ 795
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 780
            -
            -
            6
            5 ~ 24
            -
            -
            -
            6 ~ 8
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            -
            5 ~ 30
            -
            4 ~ 8
            6 ~ 10
            -
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            6 ~ 8
            5 ~ 30
            -
            -
            6 ~ 10
            -
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8
            -
            -
            5 ~ 30
            -
            -
            6 ~ 10
            -
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            -
            5 ~ 30
            -
            4 ~ 8
            -
            6 ~ 10
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            6 ~ 8
            5 ~ 30
            -
            -
            -
            6 ~ 10
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8
            -
            -
            5 ~ 30
            -
            -
            -
            6 ~ 10
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            10
            -
            5 ~ 30
            -
            4 ~ 8
            -
            -
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            10
            6 ~ 8
            5 ~ 30
            -
            -
            -
            -
            10
            1 piezas
            12
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8
            10
            -
            5 ~ 30
            -
            -
            -
            -
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            -
            5 ~ 36
            -
            4 ~ 8
            6 ~ 12
            -
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            6 ~ 8
            5 ~ 36
            -
            -
            6 ~ 12
            -
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8
            -
            -
            5 ~ 36
            -
            -
            6 ~ 12
            -
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            -
            5 ~ 36
            -
            4 ~ 8
            -
            6 ~ 10
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            6 ~ 8
            5 ~ 36
            -
            -
            -
            6 ~ 10
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8
            -
            -
            5 ~ 36
            -
            -
            -
            6 ~ 10
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            10
            -
            5 ~ 36
            -
            4 ~ 8
            -
            -
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            10
            6 ~ 8
            5 ~ 36
            -
            -
            -
            -
            10
            1 piezas
            13
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8
            10
            -
            5 ~ 36
            -
            -
            -
            -
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            -
            5 ~ 36
            -
            4 ~ 10
            6 ~ 12
            -
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            6 ~ 10
            5 ~ 36
            -
            -
            6 ~ 12
            -
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8 ~ 10
            -
            -
            5 ~ 36
            -
            -
            6 ~ 12
            -
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            -
            5 ~ 36
            -
            4 ~ 10
            -
            6 ~ 12
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            -
            6 ~ 10
            5 ~ 36
            -
            -
            -
            6 ~ 12
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8 ~ 10
            -
            -
            5 ~ 36
            -
            -
            -
            6 ~ 12
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            10 ~ 12
            -
            5 ~ 36
            -
            4 ~ 10
            -
            -
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            -
            10 ~ 12
            6 ~ 10
            5 ~ 36
            -
            -
            -
            -
            10
            1 piezas
            15
            25 ~ 995
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 988
            8 ~ 10
            10 ~ 12
            -
            5 ~ 36
            -
            -
            -
            -
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            -
            5 ~ 36
            -
            4 ~ 10
            6 ~ 12
            -
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            6 ~ 10
            5 ~ 36
            -
            -
            6 ~ 12
            -
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 10
            -
            -
            5 ~ 36
            -
            -
            6 ~ 12
            -
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            -
            5 ~ 36
            -
            4 ~ 10
            -
            6 ~ 12
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            6 ~ 10
            5 ~ 36
            -
            -
            -
            6 ~ 12
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 10
            -
            -
            5 ~ 36
            -
            -
            -
            6 ~ 12
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            10 ~ 14
            -
            5 ~ 36
            -
            4 ~ 10
            -
            -
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            10 ~ 14
            6 ~ 10
            5 ~ 36
            -
            -
            -
            -
            10
            1 piezas
            16
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 10
            10 ~ 14
            -
            5 ~ 36
            -
            -
            -
            -
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            -
            5 ~ 48
            -
            4 ~ 12
            6 ~ 16
            -
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            6 ~ 12
            5 ~ 48
            -
            -
            6 ~ 16
            -
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 12
            -
            -
            5 ~ 48
            -
            -
            6 ~ 16
            -
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            -
            5 ~ 48
            -
            4 ~ 12
            -
            6 ~ 15
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            6 ~ 12
            5 ~ 48
            -
            -
            -
            6 ~ 15
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 12
            -
            -
            5 ~ 48
            -
            -
            -
            6 ~ 15
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            10 ~ 14
            -
            5 ~ 48
            -
            4 ~ 12
            -
            -
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            10 ~ 14
            6 ~ 12
            5 ~ 48
            -
            -
            -
            -
            10
            1 piezas
            18
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 12
            10 ~ 14
            -
            5 ~ 48
            -
            -
            -
            -
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            -
            5 ~ 48
            -
            4 ~ 12
            6 ~ 16
            -
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            6 ~ 12
            5 ~ 48
            -
            -
            6 ~ 16
            -
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 14
            -
            -
            5 ~ 48
            -
            -
            6 ~ 16
            -
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            -
            5 ~ 48
            -
            4 ~ 12
            -
            6 ~ 17
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            -
            6 ~ 12
            5 ~ 48
            -
            -
            -
            6 ~ 17
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 14
            -
            -
            5 ~ 48
            -
            -
            -
            6 ~ 17
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            10 ~ 18
            -
            5 ~ 48
            -
            4 ~ 12
            -
            -
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            -
            10 ~ 18
            6 ~ 12
            5 ~ 48
            -
            -
            -
            -
            10
            1 piezas
            20
            25 ~ 1195
            [Alloyed Steel] EN 1.3505 Equiv.
            Induction Hardened
            LTBC Plating
            g6
            Induction Hardening (58HRC~)
            0 ~ 1188
            8 ~ 14
            10 ~ 18
            -
            5 ~ 48
            -
            -
            -
            -
            10
            1 piezas
            Precio unitario (IVA no incluidos)(precio unitario IVA incluidos)
            Fecha de envío estándar
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables
            -
            ( - )
            12 días laborables

            Información detallada

            Información básica

            Precaución

            • SAFZ has been localized according to European needs and requirements. Please have a look on the EU version SAFZEU. SAFZEU is available in EN 1.1213 (Cf53) and h6 / h7.

            Contorno y especificaciones

            Back to Linear Shaft Category

            Technical Drawing - Linear Shafts

             

            One End Threaded/One End Tapped with Undercut and Wrench Flats/Cross-Drilled Hole:Related Image

             

            Specification Tables - Linear Shafts

             

            Overview of the shaft designs as PDF

             

            Part Number1mm IncrementM (Coarse)
            Selection
            N (Coarse)
            Selection
            Wrench Flats DimensionsCross-Drilled Hole Dimensions(Y)Max.C
            TypeDLFSCW1Hd
            (With Wrench Flats)

            (Tol. g6)
            SAFZ
            SSAFZ

            PSAFZ
            PSSAFZ
            RSAFZ


            (D≤30, L≤500)
            (Tol. f8)
            PSAGZ
            PSS
            AGZ
            (With Wrench Flats)

            (Tol. h5)
            SFBU
            SSFBU
            PSFBU
            PSSFBU
            (With Cross-Drilled Hole)
            D≤30, L≤500
            (Tol. g6)
            SAHD
            SSAHD
            PSAHD

            PSSAHD
            RSAHD


            (Tol. f8)
            SHGD
            825~795


            5≤F≤Mx3




            F-g≥Pitchx3
            6       345        SC=1mm Increment

            SC+1≤L
            SC≥0

            Details of Wrench Flats >>P.112
            78H=1mm Increment
            L≥H+d/2+6+Nx2.5
            H≥d/2+2
            38000.5 or Less
            1025~79568      3456       8800
            1225~9956810      4568      10101000
            1325~995681012     4568      1141000
            1525~995681012     456810     131000
            1625~1195681012     456810     141200
            1825~119568101216    45681012    1661200
            2025~119568101216    45681012    1712001.0 or Less
            2525~1193 81012162024  4568101216   2271200
            3025~1493 81012162024    6810121620  27151500
            3525~1492  101216202430    81012162024 30-1500
            4040~1490   1216202430     10121620243036201500
            5050~1490    16202430      1216202430411500
             
            Coarse Thread Undercut Dimension
            MPitchMCUndercut (g)
            61.04.42
            81.256.03
            101.57.7
            121.759.44
            162.013.0
            202.516.45
            243.019.6
            303.525.0
            Overall length L requires Nx3≤L.

             

            Alterations - Linear Shafts


            One End Threaded/One End Tapped with Undercut and Wrench Flats/Cross-Drilled Hole:Related Image

            You find further options in detail under Option Overview.

            Surface Limits / Hardness - Linear Shafts

             

            Limits of hardness and hardening depth

            The linear shafts are processed after the base material has undergone inductive hardening. Therefore, the processed surfaces may result in a deviating hardness.
            In the following example, you can view the affected areas of the linear shaft, which may be affected after processing by e.g. threads, level surfaces, key surfaces and transverse bores.

             

            Limitation of linear shaft induction hardening

             

            Cause for deviating hardness

            The raw material of the linear shaft is treated via thermal induction before grinding. Thus, a configured linear shaft can be custom-made not only cost-effectively, but also with short delivery times. The linear shaft is hardened at the boundary layer (boundary layer hardening) of the liner shaft. The depth of the hardened boundary layer depends on the material used and the diameter of the linear shaft. The following table shows the hardening depth of linear shafts.
            Coatings and plating are applied to the raw material after hardening and grinding. For more information, see Coatings of the Linear Shaft.

             

            Boundary layer hardening of a linear shaft

            Figure of boundary layer hardening: hardened boundary layer in light gray

             

            Effective hardening depth of linear shafts

            Outside diameter (D)Effective hardening depth
            EN 1.1191 equiv.EN 1.3505 equiv.EN 1.4125 equiv.EN 1.4301 equiv.
            3-+0.5+0.5Without induction hardening
            4-
            5-
            6 - 10+0.3
            12 - 13+0.5+0.7+0.5
            15 - 20+0.7
            25 - 50+0.8+1

            Overview of the effective hardening depth as PDF

             

            Coatings of the linear shaft

            The surface coating is applied to the raw material before machining the linear shaft. Thanks to their coating, the usable surface or work surface of the linear shaft is not only protected against corrosion but also against wear.
            Machined positions of the linear shafts, such as plane surfaces or threads, may be uncoated, as they are added afterwards. This can lead to the machined surfaces being corroded in a linear shaft made of steel. If the linear shaft is used in a corrosive environment, it is recommended to use a stainless steel linear shaft.
            The following figure shows the areas of the linear shaft that are coated (crosshatched). 

             

            Surface coating after processing the linear shaft

            Figure: Coating of linear shafts

             

            You can find further information on surface treatment and hardness in this PDF .

             

            General Information - Linear Shafts

             

            Linear Shaft Selection Details

            - Material: steel, stainless steel

            - Coating/plating: uncoated, hard chrome plated, LTBC coated, chemically nickel-plated

            - Heat treatment: untreated, inductively hardened

            - ISO tolerances: h5, k5, g6, h6, h7, f8

            - Precision classes: perpendicularity 0.03, concentricity (with thread and increments) Ø0.02, perpendicularity 0.20, concentricity (thread and stepper) Ø0.10

            - Linearity/roundness: depends on diameter, here for the PDF

             

             

            Description / basics of the linear shaft

            Linear shafts are steel shafts that perform guiding tasks in combination with linear bearings, such as plain bearing bushings or linear ball bushings. Linear shaft holding functions can be adopted from shaft holders or linear ball bearing adapters. Most linear shafts are heat-treated (induction hardened) solid shafts. A special design of linear shafts is the hollow shaft, which is also called tubular shaft. Inductively hardened linear shafts have a high surface hardness and a tough core. The achievable surface hardness is approx. 55-58 HRC (see information on hardening depth). Linear shafts made of stainless steels can generally not be hardened. Therefore, these steel shafts should be chrome plated to protect them from wear.

             

            Materials

            Linear shafts are mainly hardened steel shafts. In addition to the selected heat treatment, the steel used in particular imparts its properties to the linear shaft, although it is a hollow shaft or a solid shaft. Therefore, special aspects such as hardness, corrosion and wear must be considered when selecting the shaft steel.

             

            Coatings

            To protect linear shafts from corrosion, the surface can be chemically nickel-plated. As an alternative to chemical nickel-plating, steel shafts can also be coated with LTBC. The LTBC coating is an anti-corrosive surface coating and it is a low-reflection coating, made of a 5 μm thick film of fluoropolymer, which in essence is a black film. In addition, the LTBC coating is resistant to bursting pressure by extreme or repeated bending. LTBC-coated linear shafts are thus particularly suitable for locations where corrosion or light reflections are undesirable. Linear shafts that require particularly high surface hardness and wear resistance can be hard chrome plated.

             

            Function

            The form and function of linear shafts differ from linear guiderails. Linear guiderails are square rails that work in combination with carriers (rotary elements, carriages) according to the rolling or sliding principle. Linear shafts on the other hand are precision-ground round steel shafts that take on a linear guide function in conjunction with linear ball bushings or plain bearing bushings (maintenance-free bushings).

             

            Areas of Application

            Linear shafts are intended for axial motion. Whether horizontal or vertical linear motion, all linear motions can be implemented with linear shafts. Common applications are stroke mechanisms and other applications with high demands on smoothness, precision and service life. Linear shafts can therefore be used in almost all industries of plant construction and mechanical engineering. Linear shafts are often found in 3D printers, metering equipment, measuring devices, positioning devices, alignment devices, bending devices and sorting equipment.

             

            Instructions for Use / Installation  - Linear Shafts

             

            For product selection, please observe the linear shaft tolerances (e.g. h5, k5, g6, h6, h7, f8) in conjunction with the diameter tolerance of the plain bearing bushing (sliding bearing) after pressing in or the running circle diameter of the linear ball bearing (ball bushing).

             

            Diameter change of linear ball bushings after pressing  Inner diameter of linear ball bushings or ball bushings

             

            Shaft Fasteners

             

            Application Example of a Linear Shaft - Linear Shafts with Linear Ball Bushings - Linear Shafts with Shaft Holder
            Application Example of a Linear Shaft Application Example - Linear Shaft with Linear Ball Bearings - Linear Ball Bearings with an Adjusting Ring
            Application Example of a Linear Shaft - Linear Shaft with Shaft Holder
            Application Example of a Linear Shaft - Linear Shaft with Circlip Groove - Linear Shaft with Circlip
            Application Example of a Linear Shaft - Linear Shaft with Holding Washer
            Application Example of a Linear Shaft - Linear Thread - Outer Threaded Linear Shaft - Linear Threaded with inner and outer threads
            Application Example of a Linear Shaft - Cross Bore Linear Shaft - Inner Thread Linear Shaft
            Application Example of a Linear Shaft - Cross Bore Linear Shaft - Outer Thread Linear Shaft

               

            Supplementary Article

             

            Shaft holder

            Product range of shaft holders

             

            Adjusting rings/clamping rings

            Product range of adjusting rings - product range of clamping rings

             

            Linear ball bearing

            Product range of linear ball bearings - product range of ball sleeves - linear ball bearing with housing

             

            Plain bearing bushings

            Product range of sliding bearing bushings - plain bearing with housing

             

            Ball guides

            Ball guide product range

             

            Industrial Applications

             

            3D printer industry
            3D printer industry
            Automotive industry
            Automotive industry
            Pharmaceutical industry
            Pharmaceutical industry
            Packaging industry
            Packaging industry