¡Estamos traduciendo nuestra tienda online al español!  
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Página principal de MISUMI
Automation Components
Linear Motion
Linear Shafts
Linear shafts / stepped on one side / external thread(Lista de números de pieza: 3 página)

Condiciones del filtro

25%

[D] Diameter (Shaft) (mm)
- 4
- 5
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 18
- 20
- 25
- 30
- 35
- 40
- 50
[L] Length (Shaft) (mm)
[25-1498/1mm incrementos]
ISO Tolerance
- g6
- h5
Material
Stainless Steel (martensitic)
EN 1.4037 Equiv.
Heat Treatment
- Induction Hardened
Surface Treatment
- No Treatment
- Hard Chrome Plating
Hardness
- Induction Hardening (56HRC - )
[P] Diameter (stepped - front side) (mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- 24
- 30
[B] Length (thread) (mm)
[2-205/1mm incrementos]
[F] Length (stud - offset - front side) (mm)
[2-210/1mm incrementos]
[PMC] Size (fine thread) (mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 15
- 17
- 20
- 25
- 30
[PMS] Size (fine thread)
- 10
- 12
- 14
- 18
Type
CAD
- 2D
- 3D
Días estimados de envío
- Todo
- En el plazo de 4 días laborables
- En el plazo de 7 días laborables
- En el plazo de 9 días laborables

MISUMI

Linear shafts / stepped on one side / external thread(Lista de números de pieza: 3 página)

CatálogoP.1-163

Precaución

SFAN has been localized according to European needs and requirements. Please have a look on the EU version SFANEU. SFANEU is available in EN 1.1213 (Cf53) and h6 / h7.

Número de pieza:

Sin liquidar. 178 candidatos encontrados.

Plano de contorno y tabla de especificaciones
Lista de números de pieza
Información detallada
Catálogo

Plano de contorno y tabla de especificaciones

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

Type			Material	Hardness	Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	Material	Hardness	Surface Treatment
SFAN	SFUN	-	EN 1.3505 Equiv.	Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~	-
SSFAN	SSFUN	-	EN 1.4037 Equiv.		-
PSFAN	PSFUN	-	EN 1.3505 Equiv.		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
PSSFAN	PSSFUN	-	EN 1.4037 Equiv.
RSFAN	-	-	EN 1.3505 Equiv.		LTBC Plating
-	-	PSFGN	EN 1.1191 Equiv.	-	Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More
-	-	PSSFGN	EN 1.4301 Equiv.	-

Part Number			1mm Increment			P Selection											D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P Selection											g6	h5	f8	(Y)Max.	R	C
(D Tolerance g6) SFAN SSFAN PSFAN PSSFAN (D Tolerance f8) PSFGN (D≥6) PSSFGN (D≥6)	(D Tolerance h5) SFUN SSFUN PSFUN PSSFUN	4	25~ 298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 B≥Pitchx3	3											-0.004 -0.012	0 -0.005	-	300	0.2 or Less	0.2 or Less
		5	25~ 398			3	4										-0.004 -0.012	0 -0.005	-	400	0.2 or Less	0.2 or Less
		6	25~ 598			3	4	5									-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~ 798			3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~ 798				4	5	6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~ 998					5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~ 998					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~ 998					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	0.1 or Less
		25	25~1198							8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	0.1 or Less
		30	25~1498							8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	0.1 or Less
		35	25~1498								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	0.1 or Less
		40	25~1498									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	0.1 or Less
		50	25~1498										16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	0.1 or Less

For O.D. tolerance f8 type, D needs to be 6 or more.

Part Number		1mm Increment			P Selection										D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P Selection										g6	(Y)Max.	R	C
(D Tolerance g6) LTBC Plating RSFAN	4	25~298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 B≥Pitchx3	3										-0.004 -0.012	300	0.2 or Less	0.2 or Less
	5	25~398			3	4									-0.004 -0.012	400	0.2 or Less	0.2 or Less
	6	25~500			3	4	5								-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	0.1 or Less
	25	25~500							8	10	12	16	20	24	-0.007 -0.020	1200	0.3 or Less	0.1 or Less
	30	25~500							8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	0.1 or Less

Further specifications can be found under the tab More Information.

Composition of a Product Code - Linear Shafts

Part Number	-	L	-	F	-	B	-	P
SFAN12	-	500	-	F20	-	B15	-	P6
SFUN8	-	150	-	F20	-	B15	-	P6

Alterations - Linear Shafts

One End Threaded:Related Image

You find further options in detail under Option Overview.

Lista de números de pieza

Número de artículos

Número de pieza

SSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,10,12,16,20,24]

SSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,10,12,15,17,20,25]

SSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]

SSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[10,12,16,20,24,30]

SSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[10,12,15,17,20,25,30]

SSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]

SSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[12,16,20,24,30]

SSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[12,15,17,20,25,30]

SSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[12,14,18]

SSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[16,20,24,30]

SSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[15,17,20,25,30]

SSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[14,18]

SSFUN4-[25-298/1]-F[2-28/1]-B0-P3

SSFUN4-[25-298/1]-F[2-28/1]-B0-PMC3

SSFUN4-[25-298/1]-F[2-28/1]-B[2-28/1]-P3

SSFUN4-[25-298/1]-F[2-28/1]-B[2-28/1]-PMC3

SSFUN5-[25-398/1]-F[2-35/1]-B[2-35/1]-P[3,4]

SSFUN5-[25-398/1]-F[2-35/1]-B[2-35/1]-PMC[3,4]

SSFUN6-[25-798/1]-F[2-42/1]-B[2-42/1]-P[3,4,5]

SSFUN6-[25-798/1]-F[2-42/1]-B[2-42/1]-PMC[3,4,5]

SSFUN8-[25-998/1]-F[2-56/1]-B[2-53/1]-P[3,4,5,6]

SSFUN8-[25-998/1]-F[2-56/1]-B[2-53/1]-PMC[3,4,5,6]

SSFUN10-[25-998/1]-F[2-70/1]-B[2-70/1]-P[4,5,6,8]

SSFUN10-[25-998/1]-F[2-70/1]-B[2-70/1]-PMC[4,5,6,8]

SSFUN10-[25-998/1]-F[2-70/1]-B[2-70/1]-PMS10

SSFUN12-[25-1198/1]-F[2-84/1]-B[2-79/1]-P[5,6,8,10]

SSFUN12-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMC[5,6,8,10]

SSFUN12-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMS[10,12]

SSFUN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-P[5,6,8,10,12]

SSFUN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMC[5,6,8,10]

SSFUN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMS[10,12]

SSFUN15-[25-1198/1]-F[2-84/1]-B[2-84/1]-P[5,6,8,10,12]

SSFUN15-[25-1198/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10,12]

SSFUN15-[25-1198/1]-F[2-84/1]-B[2-84/1]-PMS[10,12,14]

SSFUN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12]

SSFUN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15]

SSFUN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14]

SSFUN18-[25-1398/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12,16]

SSFUN18-[25-1398/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15,17]

SSFUN18-[25-1398/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14,18]

SSFUN20-[25-1198/1]-F[2-140/1]-B[2-140/1]-P[6,8,10,12,16]

SSFUN20-[25-1198/1]-F[2-140/1]-B[2-140/1]-PMC[6,8,10,12,15,17]

SSFUN20-[25-1198/1]-F[2-140/1]-B[2-140/1]-PMS[10,12,14,18]

SSFUN25-[25-1198/1]-F[2-168/1]-B[2-163/1]-P[8,10,12,16,20,24]

SSFUN25-[25-1198/1]-F[2-168/1]-B[2-163/1]-PMC[8,10,12,15,17,20]

SSFUN25-[25-1198/1]-F[2-168/1]-B[2-163/1]-PMS[10,12,14,18]

SSFUN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,10,12,16,20,24]

SSFUN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,10,12,15,17,20,25]

SSFUN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]

SSFUN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[10,12,16,20,24,30]

SSFUN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[10,12,15,17,20,25]

SSFUN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]

SSFUN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[12,16,20,24,30]

SSFUN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[12,15,17,20,25,30]

SSFUN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[12,14,18]

SSFUN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[16,20,24,30]

SSFUN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[15,17,20,25,30]

SSFUN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[14,18]

[D] Diameter (Shaft)

(mm)

[L] Length (Shaft)

(mm)

ISO Tolerance

Material

Heat Treatment

Surface Treatment

Hardness

[P] Diameter (stepped - front side)

(mm)

[B] Length (thread)

(mm)

[F] Length (stud - offset - front side)

(mm)

[PMC] Size (fine thread)

(mm)

[PMS] Size (fine thread)

RoHS?

Cantidad mínima de pedido

30	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	8 - 24	2 - 205	2 - 210	-	-	10	1 piezas
30	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	8 - 25	-	10	1 piezas
30	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	-	10 - 18	10	1 piezas
35	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	10 - 30	2 - 205	2 - 210	-	-	10	1 piezas
35	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	10 - 30	-	10	1 piezas
35	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	-	10 - 18	10	1 piezas
40	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	12 - 30	2 - 205	2 - 210	-	-	10	1 piezas
40	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	12 - 30	-	10	1 piezas
40	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	-	12 - 18	10	1 piezas
50	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	16 - 30	2 - 205	2 - 210	-	-	10	1 piezas
50	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	15 - 30	-	10	1 piezas
50	25 - 1498	g6	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	-	14 - 18	10	1 piezas
4	25 - 298	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	3	0	2 - 28	-	-	10	1 piezas
4	25 - 298	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	0	2 - 28	3	-	10	1 piezas
4	25 - 298	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	3	2 - 28	2 - 28	-	-	10	1 piezas
4	25 - 298	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 28	2 - 28	3	-	10	1 piezas
5	25 - 398	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	3 - 4	2 - 35	2 - 35	-	-	10	1 piezas
5	25 - 398	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 35	2 - 35	3 - 4	-	10	1 piezas
6	25 - 798	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	3 - 5	2 - 42	2 - 42	-	-	10	1 piezas
6	25 - 798	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 42	2 - 42	3 - 5	-	10	1 piezas
8	25 - 998	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	3 - 6	2 - 53	2 - 56	-	-	10	1 piezas
8	25 - 998	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 53	2 - 56	3 - 6	-	10	1 piezas
10	25 - 998	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	4 - 8	2 - 70	2 - 70	-	-	10	1 piezas
10	25 - 998	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 70	2 - 70	4 - 8	-	10	1 piezas
10	25 - 998	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 70	2 - 70	-	10	10	1 piezas
12	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	5 - 10	2 - 79	2 - 84	-	-	10	1 piezas
12	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 79	2 - 84	5 - 10	-	10	1 piezas
12	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 79	2 - 84	-	10 - 12	10	1 piezas
13	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	5 - 12	2 - 79	2 - 84	-	-	10	1 piezas
13	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 79	2 - 84	5 - 10	-	10	1 piezas
13	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 79	2 - 84	-	10 - 12	10	1 piezas
15	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	5 - 12	2 - 84	2 - 84	-	-	10	1 piezas
15	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 84	2 - 84	5 - 12	-	10	1 piezas
15	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 84	2 - 84	-	10 - 14	10	1 piezas
16	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	5 - 12	2 - 107	2 - 112	-	-	10	1 piezas
16	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 107	2 - 112	5 - 15	-	10	1 piezas
16	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 107	2 - 112	-	10 - 14	10	1 piezas
18	25 - 1398	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	5 - 16	2 - 107	2 - 112	-	-	10	1 piezas
18	25 - 1398	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 107	2 - 112	5 - 17	-	10	1 piezas
18	25 - 1398	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 107	2 - 112	-	10 - 18	10	1 piezas
20	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	6 - 16	2 - 140	2 - 140	-	-	10	1 piezas
20	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 140	2 - 140	6 - 17	-	10	1 piezas
20	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 140	2 - 140	-	10 - 18	10	1 piezas
25	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	8 - 24	2 - 163	2 - 168	-	-	10	1 piezas
25	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 163	2 - 168	8 - 20	-	10	1 piezas
25	25 - 1198	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 163	2 - 168	-	10 - 18	10	1 piezas
30	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	8 - 24	2 - 205	2 - 210	-	-	10	1 piezas
30	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	8 - 25	-	10	1 piezas
30	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	-	10 - 18	10	1 piezas
35	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	10 - 30	2 - 205	2 - 210	-	-	10	1 piezas
35	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	10 - 25	-	10	1 piezas
35	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	-	10 - 18	10	1 piezas
40	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	12 - 30	2 - 205	2 - 210	-	-	10	1 piezas
40	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	12 - 30	-	10	1 piezas
40	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	-	12 - 18	10	1 piezas
50	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	16 - 30	2 - 205	2 - 210	-	-	10	1 piezas
50	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	15 - 30	-	10	1 piezas
50	25 - 1498	h5	[Stainless Steel (martensitic)] EN 1.4037 Equiv.	Induction Hardened	No Treatment	Induction Hardening (56HRC - )	-	2 - 205	2 - 210	-	14 - 18	10	1 piezas

Precio unitario (IVA no incluidos)(precio unitario IVA incluidos)	Fecha de envío estándar

- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	4 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables
- ( - )	7 días laborables

Información básica

Precaución

SFAN has been localized according to European needs and requirements. Please have a look on the EU version SFANEU. SFANEU is available in EN 1.1213 (Cf53) and h6 / h7.

Información técnica

Contorno y especificaciones

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Specification Tables - Linear Shafts

Overview of the shaft designs as PDF

Coarse Thread Dimension
M	pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations - Linear Shafts

One End Threaded:Related Image

You find further options in detail under Option Overview.

Surface Limits / Hardness - Linear Shafts

Limits of hardness and hardening depth

The linear shafts are processed after the base material has undergone inductive hardening. Therefore, the processed surfaces may result in a deviating hardness.
In the following example, you can view the affected areas of the linear shaft, which may be affected after processing by e.g. threads, level surfaces, key surfaces and transverse bores.

Limitation of linear shaft induction hardening

Cause for deviating hardness

The raw material of the linear shaft is treated via thermal induction before grinding. Thus, a configured linear shaft can be custom-made not only cost-effectively, but also with short delivery times. The linear shaft is hardened at the boundary layer (boundary layer hardening) of the liner shaft. The depth of the hardened boundary layer depends on the material used and the diameter of the linear shaft. The following table shows the hardening depth of linear shafts.
Coatings and plating are applied to the raw material after hardening and grinding. For more information, see Coatings of the Linear Shaft.

Boundary layer hardening of a linear shaft

Figure of boundary layer hardening: hardened boundary layer in light gray

Effective hardening depth of linear shafts

Outside diameter (D)	Effective hardening depth
	EN 1.1191 equiv.	EN 1.3505 equiv.	EN 1.4125 equiv.	EN 1.4301 equiv.
3	-	+0.5	+0.5	Without induction hardening
4	-
5	-
6 - 10	+0.3
12 - 13	+0.5	+0.7	+0.5
15 - 20			+0.7
25 - 50	+0.8	+1

Overview of the effective hardening depth as PDF

Coatings of the linear shaft

The surface coating is applied to the raw material before machining the linear shaft. Thanks to their coating, the usable surface or work surface of the linear shaft is not only protected against corrosion but also against wear.
Machined positions of the linear shafts, such as plane surfaces or threads, may be uncoated, as they are added afterwards. This can lead to the machined surfaces being corroded in a linear shaft made of steel. If the linear shaft is used in a corrosive environment, it is recommended to use a stainless steel linear shaft.
The following figure shows the areas of the linear shaft that are coated (crosshatched).

Surface coating after processing the linear shaft

Figure: Coating of linear shafts

You can find further information on surface treatment and hardness in this PDF .

General Information - Linear Shafts

Linear Shaft Selection Details

- Material: steel, stainless steel

- Coating/plating: uncoated, hard chrome plated, LTBC coated, chemically nickel-plated

- Heat treatment: untreated, inductively hardened

- ISO tolerances: h5, k5, g6, h6, h7, f8

- Precision classes: perpendicularity 0.03, concentricity (with thread and increments) Ø0.02, perpendicularity 0.20, concentricity (thread and stepper) Ø0.10

- Linearity/roundness: depends on diameter, here for the PDF

Description / basics of the linear shaft

Linear shafts are steel shafts that perform guiding tasks in combination with linear bearings, such as plain bearing bushings or linear ball bushings. Linear shaft holding functions can be adopted from shaft holders or linear ball bearing adapters. Most linear shafts are heat-treated (induction hardened) solid shafts. A special design of linear shafts is the hollow shaft, which is also called tubular shaft. Inductively hardened linear shafts have a high surface hardness and a tough core. The achievable surface hardness is approx. 55-58 HRC (see information on hardening depth). Linear shafts made of stainless steels can generally not be hardened. Therefore, these steel shafts should be chrome plated to protect them from wear.

Materials

Linear shafts are mainly hardened steel shafts. In addition to the selected heat treatment, the steel used in particular imparts its properties to the linear shaft, although it is a hollow shaft or a solid shaft. Therefore, special aspects such as hardness, corrosion and wear must be considered when selecting the shaft steel.

Coatings

To protect linear shafts from corrosion, the surface can be chemically nickel-plated. As an alternative to chemical nickel-plating, steel shafts can also be coated with LTBC. The LTBC coating is an anti-corrosive surface coating and it is a low-reflection coating, made of a 5 μm thick film of fluoropolymer, which in essence is a black film. In addition, the LTBC coating is resistant to bursting pressure by extreme or repeated bending. LTBC-coated linear shafts are thus particularly suitable for locations where corrosion or light reflections are undesirable. Linear shafts that require particularly high surface hardness and wear resistance can be hard chrome plated.

Function

The form and function of linear shafts differ from linear guiderails. Linear guiderails are square rails that work in combination with carriers (rotary elements, carriages) according to the rolling or sliding principle. Linear shafts on the other hand are precision-ground round steel shafts that take on a linear guide function in conjunction with linear ball bushings or plain bearing bushings (maintenance-free bushings).

Areas of Application

Linear shafts are intended for axial motion. Whether horizontal or vertical linear motion, all linear motions can be implemented with linear shafts. Common applications are stroke mechanisms and other applications with high demands on smoothness, precision and service life. Linear shafts can therefore be used in almost all industries of plant construction and mechanical engineering. Linear shafts are often found in 3D printers, metering equipment, measuring devices, positioning devices, alignment devices, bending devices and sorting equipment.

Instructions for Use / Installation - Linear Shafts

For product selection, please observe the linear shaft tolerances (e.g. h5, k5, g6, h6, h7, f8) in conjunction with the diameter tolerance of the plain bearing bushing (sliding bearing) after pressing in or the running circle diameter of the linear ball bearing (ball bushing).