8 Series / slot width 10 / 40x80mm

 

Part Number	-	L
HFS8-4080	-	800
KHFS8-4080	-	1000
KHFS8-4080	-	4000

■Configurable Length Extrusions

Type	Material	Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm2	Cross Sectional Moment of Inertia mm4
							ℓx	ℓy
HFS	EN AC-51400-T5 Equiv.	Clear Anodize	HFS8-4080	50~4000	3	1109	19.8x104	71.9x104
HFS	EN AC-51400-T5 Equiv.	Black Anodize	HFSB8-4080	50~4000	3	1109	19.8x104	71.9x104
HFS	EN AC-51400-T5 Equiv.	Clear Coating	CAF8-4080	50~4000	3	1109	19.8x104	71.9x104
HFSL	EN AC-51400-T5 Equiv.	Clear Anodize	HFSL8-4080	50~4000	2.12	785	13.4x104	52.9x104
HFSL	EN AC-51400-T5 Equiv.	Black Anodize	HFSLB8-4080	50~4000	2.12	785	13.4x104	52.9x104
EFS	EN AC-51400-T5 Equiv.	Clear Anodize	EFS8-4080	50~4000	2.79	1034	19.9x104	72.6x104
EFS	EN AC-51400-T5 Equiv.	Black Anodize	EFSB8-4080	50~4000	2.79	1034	19.9x104	72.6x104
GFS	EN AW-6061-T6 Equiv.	Clear Anodize	GFS8-4080	50~4000	3.62	1340	25.21x104	90.87x104
NEFS	EN AW-6063-T5 Equiv.	Clear Anodize	NEFS8-4080	50~4000	2.79	1034	19.9x104	72.6x104
NEFS	EN AW-6063-T5 Equiv.	Black Anodize	NEFSB8-4080	50~4000	2.79	1034	19.9x104	72.6x104
NFSL	EN AW-6063-T5 Equiv.	Clear Anodize	NFSL8-4080	50~4000	2.12	785	13.4x104	52.9x104

Applicable to 6000mm depending on products.
For some extrusions, MISUMI may be unable to accept the order.
Refer to Information of Special Orders (P.103) and contact the person in charge of Special Orders at MISUMI QCT Center.

■Fixed Length Extrusions (Effective Length 4000mm, 1000mm)
Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type	Material	Surface Treatment	Part Number	L mm	Sectional Area mm2	Cross Sectional Moment of Inertia mm4
						ℓx	ℓy
HFS	EN AC-51400-T5 Equiv.	Clear Anodize	KHFS8-4080	4000	1109	19.8x104	71.9x104
HFS	EN AC-51400-T5 Equiv.	Clear Anodize	KHFS8-4080	1000	1109	19.8x104	71.9x104
HFS	EN AC-51400-T5 Equiv.	Black Anodize	KHFSB8-4080	4000	1109	19.8x104	71.9x104
HFS	EN AC-51400-T5 Equiv.	Clear Coating	KCAF8-4080	4000	1109	19.8x104	71.9x104
HFSL	EN AC-51400-T5 Equiv.	Clear Anodize	KHFSL8-4080	4000	785	13.4x104	52.9x104
HFSL	EN AC-51400-T5 Equiv.	Black Anodize	KHFSLB8-4080	4000	785	13.4x104	52.9x104
EFS	EN AC-51400-T5 Equiv.	Clear Anodize	KEFS8-4080	4000	1034	19.9x104	72.6x104
EFS	EN AC-51400-T5 Equiv.	Black Anodize	KEFSB8-4080	4000	1034	19.9x104	72.6x104
GFS	EN AW-6061-T6 Equiv.	Clear Anodize	KGFS8-4080	4000	1340	25.21x104	90.87x104
NEFS	EN AW-6063-T5 Equiv.	Clear Anodize	KNEFS8-4080	4000	1034	19.9x104	72.6x104
NEFS	EN AW-6063-T5 Equiv.	Black Anodize	KNEFSB8-4080	4000	1034	19.9x104	72.6x104
NFSL	EN AW-6063-T5 Equiv.	Clear Anodize	KNFSL8-4080	4000	785	13.4x104	52.9x104

"Effective Length 4000mm" represents the extrusion with 4000mm or more effective length.
The actual length with extra lengths on ends is more than 4000mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.