Multiturn Solid Shaft Encoder (RM9003)

Basic Attributes

• Electrical Connection - Plug

  • Connector: 1 x M12; Moulded body: stainless steel (1.4401 / 316)

  Clear

• Storage Temperature(°C)

  • -40-85

  Clear

• Code Signal

  • Clock input; TTL-compatible signals; clock and clock (inv.) from drivers to RS 422; data output; synchronous serial; TTL-compatible signals, data, and data (inv.)

  Clear

• Transmission Standard

  • DPV2

  Clear

• Shaft Material

  • 6steel (1.4104)
    Max. shaft load axial (at the shaft end) [N]: 40
    Max. shaft load radial (at the shaft end) [N]: 110
    Fixing flange: synchro-flange
  • 6steel
    Max. shaft load axial (at the shaft end) [N]: 40
    Max. shaft load radial (at the shaft end) [N]: 110
  • 10steel (1.4104)
    Max. shaft load axial (at the shaft end) [N]: 40
    Max. shaft load radial (at the shaft end) [N]: 110
    Fixing flange: clamping flange
  • 10steel (1.4104)
    Max. shaft load axial (at the shaft end) [N]: 180
    Max. shaft load radial (at the shaft end) [N]: 180
    Fixing flange: synchro-flange
  • 10steel
    Max. shaft load axial (at the shaft end) [N]: 40
    Max. shaft load radial (at the shaft end) [N]: 110
  • 10stainless steel
    Max. shaft load axial (at the shaft end) [N]: 180
    Max. shaft load radial (at the shaft end) [N]: 180
    Fixing flange: synchro-flange

  Clear

• Detection System

  • magnetic

  Clear

• Max. Relative Air Humidity(%)

  • 98
  • 98; (condensation not permissible)

  Clear

• Inputs

  • reversal of direction of rotation; reset to zero

  Clear

• Max. Revolution Electrical(U/min)

  • 6000
  • 12000

  Clear

• Max. Power-On Delay Time(ms)

  • 1000

  Clear

• Rated Insulation Voltage(V)

  • 30

  Clear

• IO-Link Revision

  • 1.1

  Clear

• Required Master Port Type

  • A

  Clear

• Transmission Type

  • COM3 (230.4 kBaud)

  Clear

• Reference Temperature Torque(°C)

  • 20
  • 25

  Clear

• Protection

  • IP 65
  • IP 65; (on the housing: IP 65; on the shaft: IP 64)
  • IP 65; (on the housing: IP 67; on the shaft: IP 64)
  • IP 65; (on the housing: IP 67; on the shaft: IP 65)
  • IP 67
  • IP 67; (on the housing: IP 67; on the shaft: IP 67)
  • IP 68; IP 69K

  Clear

• Materials

  • flange: stainless steel (1.4404 / 316L); housing: stainless steel (1.4404 / 316L)
  • flange: aluminium; housing: stainless steel (1.4521 / 444)
  • Aluminium
  • Housing cap: aluminium; Housing: steel
  • flange: aluminium; housing cap: steel scratch-resistant cathodic dip coating
  • flange: aluminium; housing: steel powder-coated

  Clear

• Current Consumption(mA)

  • < 30
  • < 75
  • < 100; ((10 V DC) ; ≤ 50 (24 V DC))
  • 100; ((24 V))
  • 230; ((10 V DC); 100 (24 V DC))

  Clear

• Protection Class

  • III

  Clear

• Accuracy(°)

  • 0.08
  • 0.1

  Clear

• Operating Voltage(V)

  • 4.5-30 DC
  • 9-30 DC
  • 9-30 DC; ("supply class 2" to cULus)
  • 10-30 DC
  • 18-30 DC; (to PELV)

  Clear

• Electrical Connection

  • Cable: 0.2 m, PUR; axial
  • Connector: 1 x M12, axial
  • Connector: 1 x M12, radial
  • Connector: 1 x M12, axial; Moulded body: stainless steel (1.4401 / 316)

  Clear

• Ambient Temperature(°C)

  • -40-85
  • -25-85

  Clear

• Reverse Polarity Protection

  • Yes

  Clear

• Output Function

  • CANopen interface

  Clear

• Protocol

  • CANopen
  • CIP (Common Industrial Protocol)

  Clear

• Max. Revolution, Mechanical(U/min)

  • 6000
  • 12000

  Clear

• Short-Circuit Protection

  • Yes

  Clear

• Communication Interface

  • CAN
  • DeviceNet
  • IO-Link
  • PROFIBUS DP
  • SSI data interface

  Clear

• Max. Starting Torque(Nm)

  • 1
  • 3
  • 5

  Clear

• Resolution

  • 4096 steps; 4096 revolutions; 24 bit
  • 4096 resolution; 8192 revolutions; 25 bit
  • 8192 steps; 4096 revolutions; 25 bit
  • 65536 steps; 32768 revolutions; 31 bit

  Clear

• Code

  • Gray code; (increasing code values when turned clockwise (seen on the shaft))
  • binary

  Clear

• Dimensions(mm)

  • Ø 36 / L = 65
  • Ø 36.5 / L = 69.5
  • Ø 36.5 / L = 79
  • Ø 36.5 / L = 100
  • Ø 36.8 / L = 76
  • Ø 42 / L = 107.9
  • Ø 58 / L = 79
  • Ø 58 / L = 94
  • Ø 58 / L = 110

  Clear

• Shaft Diameter(mm)

  • 6
  • 10

  Clear