Registro

¡Estamos traduciendo nuestra tienda online al español! 

Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Condiciones del filtro

Despejar todo

  • Stock
  • Blade diameter (D)(φ)
  • Blade length (ℓ)(mm)
    [4-75/1mm unidades]
    • MSEM230 MUGEN-COATING 2-Flute Medium End Mill
      • Volume Discount

      NS TOOL

      MSEM230 MUGEN-COATING 2-Flute Medium End Mill

      The blade length is 4x the blade diameter and the torsion angle is 30°
      Más información
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]2 ~ 482SquareTiAlN4 ~ 1250 ~ 110-
      Precio (IVA no incluido) a partir de:
      41.38 €
      Fecha de envío normal:
      6 días laborables
      Configurar
    • Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model
      • Volume Discount
      • DIA
      • Graphite
      • 4 Flutes
      • L (Long)

      MISUMI

      Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model

      The premium diamond coated products are available at the industry's lowest price
      Más información
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      2 ~ 12Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]10 ~ 604SquareDia Coat4 ~ 1275 ~ 20020 ~ 85
      Precio (IVA no incluido) a partir de:
      94.44 €
      Fecha de envío normal:
      5 días laborables
      Configurar
    • MSE430 MUGEN-COATING 4-Flute End Mill
      • Volume Discount

      NS TOOL

      MSE430 MUGEN-COATING 4-Flute End Mill

      Adopts a unique Infinity coating for 4-flute end mill. Cuts a wide range of materials from raw materials to high-hardness materials
      Más información
      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
      1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]2.5 ~ 304SquareTiAlN4 ~ 1245 ~ 80-
      Precio (IVA no incluido) a partir de:
      29.46 €
      Fecha de envío normal:
      6 días laborables
      Configurar
    • Multifunctional Turning Tool EcoCut Mini ECM CTPP435

        OSG

        Multifunctional Turning Tool EcoCut Mini ECM CTPP435

        [Features]· Use EcoCut to consolidate your tools into one instrument and help dramatically reduce machining time. · 4 tools in one· Flat-base machining· High-efficiency machining of internal diameters
        Más información
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        4 ~ 8Cast Iron[○]--Square-6 ~ 835 ~ 579 ~ 32
        Precio (IVA no incluido) a partir de:
        71.25 €
        Fecha de envío normal:
        6 días laborables
        Configurar
      • DIA-BNC, Carbide end mills with diamond coating

          OSG

          DIA-BNC, Carbide end mills with diamond coating

          Carbide end mills with diamond coating - For CFRP milling - Multiflute, fine nick geometry
          Más información
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          ---------
          Precio (IVA no incluido) a partir de:
          231.40 €
          Fecha de envío normal:
          4 días laborables
          Configurar
        • XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
          • Volume Discount
          • XAL
          • General Steel
          • 4 Flutes

          MISUMI

          XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

          The Misumi's original fine intermediate flute length is available at a reasonable price
          Más información
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]3 ~ 604SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 130-
          Precio (IVA no incluido) a partir de:
          10.85 €
          Fecha de envío normal:
          5 días laborables
          Configurar
        • 2-Flute, Long Neck Short Type for Copper / Aluminium Alloy / Plastic, CRN-LN-EDS

            OSG

            2-Flute, Long Neck Short Type for Copper / Aluminium Alloy / Plastic, CRN-LN-EDS

            High efficiency even in large protruding, rigid higher short blade Long Neck shape that enables highly precise machining. Suitable for high-speed, high-precision machining of copper electrode.
            Más información
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            0.5 ~ 12Aluminum[○] / Copper[◎] / Resin[◎]0.7 ~ 182Long-Neck SquareCrN6 ~ 1260 ~ 1402.5 ~ 60
            Precio (IVA no incluido) a partir de:
            62.97 €
            Fecha de envío normal:
            6 días laborables
            Configurar
          • TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model
            • Volume Discount
            • TS
            • General Steel
            • 4 Flutes
            • R (Regular)

            MISUMI

            TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model

            [Features] -The cutter shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)-All-purpose cutter with 4 cutting edges for a wide range of applications-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°-The coating shows high oxidation resistance and high hardness and achieves a long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
            Más información
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 604SquareFor High Hardness (Silicon Group)4 ~ 2045 ~ 13023 ~ 92
            Fecha de envío normal:
            5 días laborables
            Configurar
          • XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model
            • Volume Discount
            • TiAlN
            • High-Hardness Steel
            • Multi-Flutes (5 ~)

            MISUMI

            XAC series carbide high-helical end mill for high-hardness steel machining, multi-blade, 45° torsion / long model

            The expensive long flute type for high hardness is offered at an affordable price
            Más información
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            6 ~ 20General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / Stainless Steel[○] / Cast Iron[○]26 ~ 766 ~ 8High HelicalTiAlN6 ~ 2070 ~ 140-
            Precio (IVA no incluido) a partir de:
            44.80 €
            Fecha de envío normal:
            5 días laborables
            Configurar
          • WXL-Coated 2-Flute Long Neck Short Type (Deep Ribbed Type) WXL-LN-EDS
            • DESCUENTO
            • Volume Discount

            OSG

            WXL-Coated 2-Flute Long Neck Short Type (Deep Ribbed Type) WXL-LN-EDS

            [Features]· WXL coating with excellent lubrication and wear resistance. Can be used with a wide range of work materials and cutting applications. Multiple variations available.
            Más información
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            0.1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.15 ~ 182Long-Neck SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 1400.3 ~ 60
            Precio (IVA no incluido) a partir de:
            44.60 €
            Precio especial
            Fecha de envío normal:
            Artículo en stock: 1 día laborable
            Algunos artículos se pueden enviar el mismo día
            Configurar
          • CRN-ES2000 for Copper Electrode Processing, 2-Flute, Square

              UNION TOOL

              CRN-ES2000 for Copper Electrode Processing, 2-Flute, Square

              [Features]· CrN coating, which is effective in copper cutting, achieves a longer operating life· The blade design dedicated for copper achieves excellent cutting quality
              Más información
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              0.2 ~ 12Aluminum[○] / Copper[◎] / Resin[○]0.6 ~ 402SquareCrN4 ~ 1240 ~ 100-
              Precio (IVA no incluido) a partir de:
              32.17 €
              Fecha de envío normal:
              6 días laborables
              Configurar
            • UT Coat, 4-Flute Square CZS

                UNION TOOL

                UT Coat, 4-Flute Square CZS

                [Features]· With the newly developed bottom blade shape, Z cuts can be processed on solid workpieces· Uses Chip-Resistant, High-Toughness Carbide Material· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance
                Más información
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[◎]1.5 ~ 404Square-4 ~ 2050 ~ 125-
                Precio (IVA no incluido) a partir de:
                52.78 €
                Fecha de envío normal:
                6 días laborables
                Configurar
              • Carbide Counterboring Series FX Coated For Counterboring 2 Flute Short FX-ZDS
                • Volume Discount

                OSG

                Carbide Counterboring Series FX Coated For Counterboring 2 Flute Short FX-ZDS

                End mill for countersinking. In addition to its use as a hexagonal bolt sinking hole drill, it can also be used as a pre-drilling processing tool for inclines.
                Más información
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                3 ~ 20General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]8 ~ 382SquareTiAlN6 ~ 2050 ~ 125-
                Precio (IVA no incluido) a partir de:
                56.45 €
                Fecha de envío normal:
                6 días laborables
                Configurar
              • PCD End Mill, Long Shank 5493

                  GUHRING

                  PCD End Mill, Long Shank 5493

                  Shows excellent performance for machining aluminum or composite material such as CFRP.
                  Más información
                  Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                  4 ~ 20--2Square-6 ~ 2070 ~ 150-
                  Precio (IVA no incluido) a partir de:
                  484.36 €
                  Fecha de envío normal:
                  24 días laborables
                  Configurar
                • EPL-WRESF, Carbide end mill

                    OSG

                    EPL-WRESF, Carbide end mill

                    Carbide end mill - For general applications - 4 flutes, roughing - Weldon shank
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    ---------
                    Precio (IVA no incluido) a partir de:
                    49.20 €
                    Fecha de envío normal:
                    4 días laborables
                    Configurar
                  • XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model
                    • Volume Discount
                    • XAL
                    • General Steel
                    • 4 Flutes

                    MISUMI

                    XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

                    The new "standard" square end mill with 45° spiral is available at an ultra-low price
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    2 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]5 ~ 384SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 125-
                    Precio (IVA no incluido) a partir de:
                    22.70 €
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • XAL series carbide square end mill, 2-flute / 3D Flute Length model
                    • Volume Discount
                    • XAL
                    • General Steel
                    • 2 Flutes

                    MISUMI

                    XAL series carbide square end mill, 2-flute / 3D Flute Length model

                    The Misumi's unique lineup of fine flute length is available at attractive low prices
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.3 ~ 602SquareFor General Steels (AlCrN, etc.)3 ~ 2040 ~ 110-
                    Precio (IVA no incluido) a partir de:
                    9.61 €
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model
                    • Volume Discount
                    • TS
                    • General Steel
                    • 4 Flutes
                    • B (Stub)

                    MISUMI

                    TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model

                    [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Suitable for high-speed machining with 1.5 times groove length-Optimal for low to medium speed machining due to universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    2 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 184SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 75-
                    Precio (IVA no incluido) a partir de:
                    20.56 €
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • Carbide square end mill, 2-flute / 2D Flute Length (short) model
                    • Volume Discount
                    • Non-Coated
                    • General Steel
                    • 2 Flutes
                    • S (Short)

                    MISUMI

                    Carbide square end mill, 2-flute / 2D Flute Length (short) model

                    Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.2 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.4 ~ 242SquareNon-Coated3 ~ 1235 ~ 7517 ~ 45
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • Carbide square end mill, 2-flute / 3D Flute Length (regular) model
                    • Volume Discount
                    • Non-Coated
                    • General Steel
                    • 2 Flutes
                    • R (Regular)

                    MISUMI

                    Carbide square end mill, 2-flute / 3D Flute Length (regular) model

                    The 3D flute length type that produces high-quality finish supports a wide range of machining areas
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.2 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ~ 362SquareNon-Coated3 ~ 1240 ~ 8523 ~ 55
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model
                    • Volume Discount
                    • TS
                    • Titanium
                    • 4 Flutes
                    • S (Short)

                    MISUMI

                    TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model

                    An end mill for titanium machining that performs medium roughing and finish machining at the same time
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    6 ~ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]14 ~ 424SquareFor High Hardness (Silicon Group)6 ~ 2060 ~ 120-
                    Precio (IVA no incluido) a partir de:
                    109.35 €
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
                    • Volume Discount

                    MISUMI

                    XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model

                    The long-awaited long-neck type joins the popular XAL Series
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.1 ~ 6General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.2 ~ 92Long-Neck SquareFor General Steels (AlCrN, etc.)4 ~ 650 ~ 1000.3 ~ 60
                    Precio (IVA no incluido) a partir de:
                    10.81 €
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model
                    • Volume Discount

                    MISUMI

                    XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

                    Introducing a regular type with 45° spiral in the popular XAL Series
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]4 ~ 484SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 105-
                    Precio (IVA no incluido) a partir de:
                    23.28 €
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model
                    • Volume Discount

                    MISUMI

                    XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

                    Introducing a long type with 45° spiral in the popular XAL Series
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]5 ~ 604SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 105-
                    Precio (IVA no incluido) a partir de:
                    28.66 €
                    Fecha de envío normal:
                    5 días laborables
                    Configurar
                  • WXL-Coated 2-Flute 1.5D Flute Length Type WXL-1.5D-DE
                    • Volume Discount

                    OSG

                    WXL-Coated 2-Flute 1.5D Flute Length Type WXL-1.5D-DE

                    [Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.15 ~ 182SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 75-
                    Precio (IVA no incluido) a partir de:
                    25.40 €
                    Fecha de envío normal:
                    6 días laborables
                    Configurar
                  • 2-Flute 3D Type WXL-3D-DE
                    • DESCUENTO
                    • Volume Discount

                    OSG

                    2-Flute 3D Type WXL-3D-DE

                    2-bladed end mill treated with the high hardness lubricating film WXL coat.ing Effective at grinding copper alloys in addition to steel. Recommended for both wet and dry machining.
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.3 ~ 602SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 130-
                    Precio (IVA no incluido) a partir de:
                    25.40 €
                    Precio especial
                    Fecha de envío normal:
                    Artículo en stock: 1 día laborable
                    Algunos artículos se pueden enviar el mismo día
                    Configurar
                  • 2-Flute, for Steel / Aluminium Alloy, Short, CA-RG-EDS
                    • Volume Discount

                    OSG

                    2-Flute, for Steel / Aluminium Alloy, Short, CA-RG-EDS

                    For copper, aluminum alloy. Well suited for finishing work on surfaces thanks to good cutting capabilities and a unique chatter preventing blade design.
                    Más información
                    Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                    4.5 ~ 10Aluminum[◎] / Copper[◎] / Resin[○]11 ~ 222SquareNon-Coated6 ~ 1045 ~ 70-
                    Precio (IVA no incluido) a partir de:
                    76.20 €
                    Fecha de envío normal:
                    6 días laborables
                    Configurar
                  • 4-Flute, for Steel / Aluminium Alloy, Balance Check Short CRN-EMS

                      OSG

                      4-Flute, for Steel / Aluminium Alloy, Balance Check Short CRN-EMS

                      Precise finishing of copper and copper alloys possible with the CRN coated, well sharpened blade shape.
                      Más información
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 12Aluminum[○] / Copper[◎] / Resin[◎]8 ~ 264SquareCrN6 ~ 1270 ~ 140-
                      Precio (IVA no incluido) a partir de:
                      69.29 €
                      Fecha de envío normal:
                      6 días laborables
                      Configurar
                    • High Helix Short Type FX-MG-EHS
                      • Volume Discount

                      OSG

                      High Helix Short Type FX-MG-EHS

                      4-flute groove cutting has fantastic chip evacuation, and prevents burrs with its excellent sharpness. 3-flute strong against chatter vibrations is also available.
                      Más información
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]83SquareTiAlN650-
                      Precio (IVA no incluido) a partir de:
                      86.80 €
                      Fecha de envío normal:
                      6 días laborables
                      Configurar
                    • AL3D-2DLC Aluminium-Only End Mill (DLC Coating)
                      • Volume Discount

                      NS TOOL

                      AL3D-2DLC Aluminium-Only End Mill (DLC Coating)

                      Capable of stable high efficiency machining under all conditions. Adopts a uniquely adhesive high DLC coating suited to long periods of machining
                      Más información
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 12Aluminum[◎]3 ~ 362SquareDLC4 ~ 1245 ~ 90-
                      Precio (IVA no incluido) a partir de:
                      54.22 €
                      Fecha de envío normal:
                      6 días laborables
                      Configurar
                    • MHRH430 4-Flute Long Neck End Mill for High-Hardness
                      • DESCUENTO
                      • Volume Discount

                      NS TOOL

                      MHRH430 4-Flute Long Neck End Mill for High-Hardness

                      Adopts premium Infinity coating to achieve longer life in machining of materials with high hardness. Also enhances machining accuracy.
                      Más información
                      Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 6General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]0.8 ~ 94Long-Neck SquareFor High Hardness (Silicon Group)4 ~ 650 ~ 1104 ~ 50
                      Precio (IVA no incluido) a partir de:
                      41.08 €
                      Precio especial
                      Fecha de envío normal:
                      Artículo en stock: 1 día laborable
                      Algunos artículos se pueden enviar el mismo día
                      Configurar
                    • DCES DIA Coated, for Graphite Processing, 2-Flute Square

                        UNION TOOL

                        DCES DIA Coated, for Graphite Processing, 2-Flute Square

                        [Features]· 2-Flute Diamond Coated End Mill for Graphite Electrode Machining· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
                        Más información
                        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                        0.2 ~ 6Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]0.6 ~ 184SquareDia Coat4 ~ 645 ~ 60-
                        Precio (IVA no incluido) a partir de:
                        125.02 €
                        Fecha de envío normal:
                        7 días laborables
                        Configurar
                      • Champion Solid, End Mill NC-4
                        • Volume Discount

                        NS TOOL

                        Champion Solid, End Mill NC-4

                        General purpose type with 2x blade length
                        Más información
                        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                        1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○]2 ~ 244SquareNon-Coated4 ~ 1245 ~ 75-
                        Precio (IVA no incluido) a partir de:
                        57.89 €
                        Fecha de envío normal:
                        6 días laborables
                        Configurar
                      • MUGEN-COATING 4-Flute End Mill MSE445
                        • DESCUENTO
                        • Volume Discount

                        NS TOOL

                        MUGEN-COATING 4-Flute End Mill MSE445

                        Adopts a unique Infinity coating for 4-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion
                        Más información
                        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                        2 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] / Resin[◎]5 ~ 304SquareTiAlN4 ~ 1245 ~ 80-
                        Precio (IVA no incluido) a partir de:
                        45.97 €
                        Precio especial
                        Fecha de envío normal:
                        Artículo en stock: 1 día laborable
                        Algunos artículos se pueden enviar el mismo día
                        Configurar
                      • Carbide End Mill CFRP Router Series With Fine Pitch Nick

                          OSG

                          Carbide End Mill CFRP Router Series With Fine Pitch Nick

                          Diamond-coated router with an superior abrasion resistance.
                          Más información
                          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                          4 ~ 12Resin[◎]12 ~ 366 ~ 14RoughingDia Coat4 ~ 1262 ~ 94-
                          Precio (IVA no incluido) a partir de:
                          110.50 €
                          Fecha de envío normal:
                          6 días laborables
                          Configurar
                        • Carbide End Mill CFRP Router Series Herringbone Type

                            OSG

                            Carbide End Mill CFRP Router Series Herringbone Type

                            Diamond-coated router with an superior abrasion resistance.
                            Más información
                            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                            6 ~ 10-15 ~ 254RoughingDia Coat6 ~ 1065 ~ 75-
                            Precio (IVA no incluido) a partir de:
                            98.04 €
                            Fecha de envío normal:
                            6 días laborables
                            Configurar
                          • Router Series for CFRP, Iris Melter DIA-DCR

                              OSG

                              Router Series for CFRP, Iris Melter DIA-DCR

                              Diamond coated knurled head routers. End mill cutting edge.
                              Más información
                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              3.175 ~ 6.35-10 ~ 19-RoughingDia Coat3.175 ~ 6.3538.1 ~ 63.5-
                              Precio (IVA no incluido) a partir de:
                              101.94 €
                              Fecha de envío normal:
                              6 días laborables
                              Configurar
                            • SAE3 High-Helix End Mill for Aluminium, 3-Flute, Non-Coated
                              • Volume Discount

                              OKAZAKI SEIKO

                              SAE3 High-Helix End Mill for Aluminium, 3-Flute, Non-Coated

                              High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.
                              Más información
                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              3 ~ 20Aluminum[◎] / Copper[○]10 ~ 453High HelicalNon-Coated6 ~ 2045 ~ 105-
                              Precio (IVA no incluido) a partir de:
                              50.67 €
                              Fecha de envío normal:
                              8 días laborables
                              Configurar
                            • SED4A Square End Mill, 4-Flute, OK Coated
                              • Volume Discount

                              OKAZAKI SEIKO

                              SED4A Square End Mill, 4-Flute, OK Coated

                              A 4-flute OK coated end mill which can be used for a wide range of machining applications, from raw materials to stainless steel.
                              Más información
                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              2 ~ 32General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]6 ~ 554SquareTiAlN4 ~ 3245 ~ 130-
                              Precio (IVA no incluido) a partir de:
                              48.65 €
                              Fecha de envío normal:
                              6 días laborables
                              Configurar
                            • Solid End Mill OCFS4-L Type
                              • Volume Discount

                              DIJET

                              Solid End Mill OCFS4-L Type

                              Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                              Más información
                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              3 ~ 25-20 ~ 804SquareNon-Coated6 ~ 2560 ~ 150-
                              Precio (IVA no incluido) a partir de:
                              111.29 €
                              Fecha de envío normal:
                              8 días laborables
                              Configurar
                            • End Mill with 2 Carbide Flutes and Corner C Face KSC-2
                              • Volume Discount

                              KYOWA SEIKO

                              End Mill with 2 Carbide Flutes and Corner C Face KSC-2

                              [Features] It can be used for flat surface machining, side machining, grooving, and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
                              Más información
                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              1 ~ 6General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]3 ~ 132SquareNon-Coated4 ~ 640 ~ 50-
                              Precio (IVA no incluido) a partir de:
                              77.02 €
                              Fecha de envío normal:
                              6 días laborables
                              Configurar
                            • Carbide Miniature End Mill KMSE‐2
                              • Volume Discount

                              KYOWA SEIKO

                              Carbide Miniature End Mill KMSE‐2

                              [Features] It can be used for flat surface, side, groove, plunge (Z-feed), oblique cutting, and countersink machining. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel, and cast iron.
                              Más información
                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              0.1 ~ 3General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]0.2 ~ 82SquareNon-Coated340-
                              Precio (IVA no incluido) a partir de:
                              72.80 €
                              Fecha de envío normal:
                              6 días laborables
                              Configurar
                            • Carbide Long Blade End Mill KSEL-2
                              • Volume Discount

                              KYOWA SEIKO

                              Carbide Long Blade End Mill KSEL-2

                              Carbide long flute end mill, KSEL-2An end mill with 4 to 12 times the flute length.Rank angle: Standard helix angle (30 to 44°).
                              Más información
                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              0.1 ~ 6General Steel[○] / Quenched and tempered steel[○] / Aluminum[○]0.3 ~ 602SquareNon-Coated3 ~ 640 ~ 100-
                              Precio (IVA no incluido) a partir de:
                              83.36 €
                              Fecha de envío normal:
                              6 días laborables
                              Configurar
                            • End Mill For Roughing & Semi-Finishing (Center Cut / Double Fluted) Hardness: 43 ≦ HRC ≦ 63
                              • Volume Discount

                              SANDVIK

                              End Mill For Roughing & Semi-Finishing (Center Cut / Double Fluted) Hardness: 43 ≦ HRC ≦ 63

                              [Features]A solid end mill for maximum productivity with all types of work material and machining processesThe double-fluted shape ensures both rigidity and the effective handling of cutting chipsFor end milling of all types of work material
                              Más información
                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              2 ~ 20General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]7 ~ 383 ~ 4SquareTiCN6 ~ 2057 ~ 125-
                              Precio (IVA no incluido) a partir de:
                              118.69 €
                              Fecha de envío normal:
                              6 días laborables
                              Configurar
                            • CoroMill Plura End Mill For Roughing, With Lubrication Hole R215.34 (Hardness < 28 HRC)
                              • Volume Discount

                              SANDVIK

                              CoroMill Plura End Mill For Roughing, With Lubrication Hole R215.34 (Hardness < 28 HRC)

                              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                              6 ~ 20General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]7 ~ 384RoughingTiCN6 ~ 2054 ~ 104-
                              Precio (IVA no incluido) a partir de:
                              151.23 €
                              Fecha de envío normal:
                              6 días laborables
                              Configurar