Carbide Square End Mills（Blade tip shape：C plane）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

XAC series carbide roughing end mill, fine pitch / regular model

MISUMI

Strongly supports the cost reduction of roughing with the limited special price for standard sizes

Volume Discount

TiAlN
General Steel
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	63.49 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TAC2, 2-Flute, A-Cut End Mill MA

ASAHI TOOLS

It has a wide chip space and excellent chip discharge performance. Uses an MA tip suitable for steel machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	99.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill with 2 Carbide Flutes and Corner C Face KSC-2

KYOWA SEIKO

[Features] It can be used for flat surface machining, side machining, grooving, and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	77.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide roughing end mill, 45° spiral / fine pitch / short model

MISUMI

[Features]
-High-speed rotary machining is possible with 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model

MISUMI

Volume Discount

TS
General Steel
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

MISUMI

[Features]
-High-speed rotary machining is possible by adopting 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
L (Long)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

MISUMI

[Features]
-High-speed rotary machining is possible by using a 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-Long shank, ideal for milling deep cavities
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating features.

Volume Discount

TS
General Steel
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

MISUMI

Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

Volume Discount

TS
SUS
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	75.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

MISUMI

Ideal for the standing-wall finish of stainless steel

Volume Discount

TS
SUS
3 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	105.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Roughing End Mill for Stainless Steel Machining

MISUMI

Ideal for the medium-finishing of difficult-to-cut SUS, etc.

Volume Discount

TS
SUS
3 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	81.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model

MISUMI

An end mill for titanium machining that performs medium roughing and finish machining at the same time

Volume Discount

TS
Titanium
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	104.92 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Roughing Series WX Coated Roughing

OSG

Since the wavy blade shape reduces the cutting power, big cutting is possible. High efficiency of strong roughing can be done even in chatter vibration.

Select to compare

Configure now
Starting from^∗ ：	126.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

FAGCNα FA Coated Carbide Nα Nick

SANKO MFG

[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· New shape and new surface processing provide excellent chipping resistance and chip discharge.
· A new standard considering usability of the blade length is adopted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	125.18 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCVα SA Coated Carbide Victory α Nick

SANKO MFG

[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· Newly developed nick/cross-section shape provide excellent chipping resistance and chip discharge.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	94.29 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SAGCα SA Coated Carbide α Nick

SANKO MFG

[Features]
· With a unique roughing blade shape, heavy machining and high speed machining are possible

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	126.61 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

TAC2, 2-Flute, A-Cut End Mill G2

ASAHI TOOLS

It has a wide chip space and excellent chip discharge performance. Adopts a G2 specification tip suitable for cast iron and nonferrous metal machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	99.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TAC4, 4-Flute, A-Cut End Mill MA

ASAHI TOOLS

Ideal for improving side milling efficiency.
Machining applications (machining shape): Side milling / Grooving
-Materials: Tungsten carbide
-Machining material: General steel / Heat treated steel / Stainless steel / Cast iron / Aluminium / Copper / Resin
・-Coating: Uncoated.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	141.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

LSU Long Shank Ultra 30 End Mill AH10

ASAHI TOOLS

Long underneck: Ideal for end milling in deep areas. Tip material is a G2 tip suitable for cast iron and nonferrous metals.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	163.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

LSU Special Long Shank Ultra 30 End Mill AH10

ASAHI TOOLS

Long underneck: Ideal for end milling in deep areas. Tip material is a G2 tip suitable for cast iron and nonferrous metals.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	207.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SCT S Cut End Mill MX30

ASAHI TOOLS

JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	440.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SCT Long S-Cut End Mill MX30

ASAHI TOOLS

JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	533.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

BED2 Brazed Square End Mill, 2-Flute, Non-Coated

OKAZAKI SEIKO

Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	154.29 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

BPD4 Brazed Square End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	236.30 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated

OKAZAKI SEIKO

Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	305.01 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	343.42 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

Ultrafine particle tip (Z-10) enables a wide range of machining from cast iron to steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	472.71 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat

OKAZAKI SEIKO

Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

High torsion roughing endmill ideal for roughing aluminum material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	117.35 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated

OKAZAKI SEIKO

The weld prevention effect of the pure DLC coating provides an astonishingly long service life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	135.08 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Spiral Cut End Mill SPC Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	264.58 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS2-L Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	105.59 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS2-S Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	59.65 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS4-L Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	111.29 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid End Mill OCFS4-S Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	86.01 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Long One-Cut End Mill OC-L

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	214.12 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

End Mill with Blades OCEB

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	142.97 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide Silent Roughing End Mill SI-WC-RESF

OSG

Select to compare

Configure now
Starting from^∗ ：	93.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

For CFRP / Aluminum, Non-Coated 1-Flute

VAN_HOORN

[Features]
· Sharp cutting edge smoothly processes aluminum and resin.
· Excellent for everything from roughing machining to finish machining.
· Comes with one blade and plenty of space for chip discharge.
· European-made high quality for peace of mind.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Diacoat Router

VAN_HOORN

[Features]
· Diamond coated roughing router.
· It is effective in roughing of graphite, improving efficiency.
· Outstanding stability and long tool life.
· European-made high quality for peace of mind.

Select to compare

Configure now
Starting from^∗ ：	178.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

GSX MILL VL Roughing 2.5D GSXVLRE4-2.5D

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	123.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare
Brand	MISUMI	ASAHI TOOLS	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	SANKO MFG	SANKO MFG	SANKO MFG	ASAHI TOOLS	ASAHI TOOLS	ASAHI TOOLS	ASAHI TOOLS	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	DIJET	OSG	VAN_HOORN	VAN_HOORN	NACHI(FUJIKOSHI)
Product Series	XAC series carbide roughing end mill, fine pitch / regular model	TAC2, 2-Flute, A-Cut End Mill MA	End Mill with 2 Carbide Flutes and Corner C Face KSC-2	TSC series carbide roughing end mill, 45° spiral / fine pitch / short model	TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / long model	TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	TSC Series Carbide Roughing End Mill for Stainless Steel Machining	TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model	Carbide Roughing Series WX Coated Roughing	FAGCNα FA Coated Carbide Nα Nick	SAGCVα SA Coated Carbide Victory α Nick	SAGCα SA Coated Carbide α Nick	TAC2, 2-Flute, A-Cut End Mill G2	TAC4, 4-Flute, A-Cut End Mill MA	LSU Long Shank Ultra 30 End Mill AH10	LSU Special Long Shank Ultra 30 End Mill AH10	SCT S Cut End Mill MX30	SCT Long S-Cut End Mill MX30	BED2 Brazed Square End Mill, 2-Flute, Non-Coated	BPD4 Brazed Square End Mill, 4-Flute, Non-Coated	BED2L Brazed Long Square End Mill, 2-Flute, Non-Coated	BPD4L Brazed Long Square End Mill, 4-Flute, Non-Coated	BPD4U Brazed Extra-Long Square End Mill, 4-Flute, Non-Coated	SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat	SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated	SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated	Spiral Cut End Mill SPC Type	Solid End Mill OCFS2-L Type	Solid End Mill OCFS2-S Type	Solid End Mill OCFS4-L Type	Solid End Mill OCFS4-S Type	Long One-Cut End Mill OC-L	End Mill with Blades OCEB	Carbide Silent Roughing End Mill SI-WC-RESF	For CFRP / Aluminum, Non-Coated 1-Flute	Diacoat Router	GSX MILL VL Roughing 2.5D GSXVLRE4-2.5D
Starting from^∗	63.49 € *Unit price with basic configuration Volume Discount	99.36 € *Unit price with basic configuration Volume Discount	77.02 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	75.33 € *Unit price with basic configuration Volume Discount	105.15 € *Unit price with basic configuration Volume Discount	81.46 € *Unit price with basic configuration Volume Discount	104.92 € *Unit price with basic configuration Volume Discount	126.21 € *Unit price with basic configuration	125.18 € *Unit price with basic configuration Volume Discount	94.29 € *Unit price with basic configuration Volume Discount	126.61 € *Unit price with basic configuration Volume Discount	99.36 € *Unit price with basic configuration Volume Discount	141.11 € *Unit price with basic configuration Volume Discount	163.57 € *Unit price with basic configuration Volume Discount	207.75 € *Unit price with basic configuration Volume Discount	440.94 € *Unit price with basic configuration Volume Discount	533.65 € *Unit price with basic configuration Volume Discount	154.29 € *Unit price with basic configuration Volume Discount	236.30 € *Unit price with basic configuration Volume Discount	305.01 € *Unit price with basic configuration Volume Discount	343.42 € *Unit price with basic configuration Volume Discount	472.71 € *Unit price with basic configuration Volume Discount	74.91 € *Unit price with basic configuration Volume Discount	117.35 € *Unit price with basic configuration Volume Discount	135.08 € *Unit price with basic configuration Volume Discount	264.58 € *Unit price with basic configuration Volume Discount	105.59 € *Unit price with basic configuration Volume Discount	59.65 € *Unit price with basic configuration Volume Discount	111.29 € *Unit price with basic configuration Volume Discount	86.01 € *Unit price with basic configuration Volume Discount	214.12 € *Unit price with basic configuration Volume Discount	142.97 € *Unit price with basic configuration Volume Discount	93.17 € *Unit price with basic configuration	38.48 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	178.56 € *Unit price with basic configuration	123.74 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	8 Days	8 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	10 Days	10 Days	10 Days	10 Days	10 Days	6 Days	10 Days	10 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	6 Days	Same day	5 Days	6 Days
Specifications	TiAlN General Steel R (Regular)			TS General Steel S (Short)	TS General Steel R (Regular)	TS General Steel L (Long)	TS General Steel R (Regular)	TS SUS 3 Flutes S (Short)	TS SUS 3 Flutes R (Regular)	TS SUS 3 Flutes R (Regular)	TS Titanium 4 Flutes S (Short)
Blade diameter (D)(φ)	6 ～ 20	10 ～ 40	1 ～ 6	5 ～ 20	3 ～ 20	6 ～ 20	6 ～ 20	3 ～ 16	3 ～ 12	6 ～ 20	6 ～ 20	14 ～ 25	3 ～ 25	5 ～ 20	5 ～ 25	10 ～ 60	15 ～ 50	13 ～ 40	13 ～ 40	20 ～ 40	20 ～ 40	20 ～ 50	20 ～ 50	20 ～ 50	20 ～ 50	20 ～ 50	5 ～ 25	6 ～ 20	6 ～ 20	15 ～ 38	3 ～ 25	1 ～ 30	3 ～ 25	3 ～ 30	10 ～ 60	10.5 ～ 60	6 ～ 12H	3	12 ～ 16	4 ～ 20
work material	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Cast Iron[○]	General Steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎]	Graphite[◎] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○]
Blade length (ℓ)(mm)	16 ～ 38	20 ～ 50	3 ～ 13	10 ～ 38	15 ～ 45	25 ～ 65	15 ～ 45	7 ～ 35	10.5 ～ 38	15 ～ 50	14 ～ 42	26 ～ 45	10 ～ 62	13 ～ 38	15 ～ 60	20 ～ 70	25 ～ 60	20 ～ 50	20 ～ 50	40 ～ 80	60 ～ 120	32 ～ 63	32 ～ 63	55 ～ 125	55 ～ 125	85 ～ 150	12 ～ 45	15 ～ 45	15 ～ 45	26 ～ 55	20 ～ 80	3 ～ 60	20 ～ 80	10 ～ 60	10 ～ 200	20 ～ 70	13 ～ 26	4	36	10 ～ 50
Number of flutes(sheet)	3 ～ 4	2	2	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3	3	3	4	4 ～ 6	3 ～ 4	4	4	2	4	2	2	4	4	2	4	2	4	4	4	3	3	4 ～ 6	2	2	4	4	2	2	4	1	2	4
Type	Roughing	Square	Square	Roughing	Roughing	Roughing	Roughing	Square	Square	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square	Roughing	Roughing	Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Roughing	Roughing	Roughing	Square	Square	Square	Square	Square	Square	Square	Roughing	Square	Roughing	Roughing
Coating	TiAlN	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	Non-Coated	DLC	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	Non-Coated	Dia Coat	For General Steels (AlCrN, etc.)
Shank diameter (d)(mm)	6 ～ 20	12 ～ 32	4 ～ 6	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 16	6 ～ 12	6 ～ 20	6 ～ 20	12 ～ 25	3 ～ 25	6 ～ 20	6 ～ 25	12 ～ 42	16 ～ 42	16 ～ 42	16 ～ 42	20 ～ 42	20 ～ 42	20 ～ 42	20 ～ 42	20 ～ 42	20 ～ 42	25 ～ 42	4 ～ 25	6 ～ 20	6 ～ 20	16 ～ 32	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 32	12 ～ 42	12 ～ 42	6 ～ 12	6	12 ～ 16	6 ～ 20
Overall Length (L)(mm)	57 ～ 104	70 ～ 130	40 ～ 50	60 ～ 110	60 ～ 130	100 ～ 150	100 ～ 150	60 ～ 105	60 ～ 100	60 ～ 130	60 ～ 120	85 ～ 120	50 ～ 140	50 ～ 110	60 ～ 140	70 ～ 160	80 ～ 160	140 ～ 270	180 ～ 320	130 ～ 180	150 ～ 220	115 ～ 160	115 ～ 160	140 ～ 240	140 ～ 240	185 ～ 265	50 ～ 120	50 ～ 105	50 ～ 105	84 ～ 123	60 ～ 150	45 ～ 130	60 ～ 150	45 ～ 130	100 ～ 310	80 ～ 170	60 ～ 80	51	89 ～ 150	45 ～ 100
Underneck length (ℓ1)(mm)	-	-	-	17 ～ 72	20 ～ 92	30 ～ 112	20 ～ 95	-	-	-	-	-	22 ～ 57	18	22 ～ 55	-	-	80 ～ 150	120 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50 ～ 70	-
Machining Application	Plane / Side / Groove / Inclined Cuts	Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove / Countersinking	Side / Groove	Side / Groove / Countersinking	Side / Groove / Countersinking	Side / Groove	Side / Groove	Plane / Groove	Plane / Side	Plane / Groove	Plane / Side	Plane / Side	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Groove / Plunging (Z feed)	Groove / Plunging (Z feed)	Groove / Plunging (Z feed)	Groove / Plunging (Z feed)	Groove / Plunging (Z feed)	-	Side / Groove	Plane / Side / Inclined Cuts	-	-	Side / Groove
Blade tip shape	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane
Torsion Angle (θ)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚) / High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Variable lead	-	-	Variable lead

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.775
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6H
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8H
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.525
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10H
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12H
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.875
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.4
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.96
  - 3
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
  - 3.96
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.3688
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.78
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.5626
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9502
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.5438
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.9502
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.1186
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.52
  - 9.525
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.3124
  - 10.4
  - 10.49
  - 10.5
  - 10.6
  - 10.7
  - 10.7188
  - 10.8
  - 10.9
- 11～11.9126
  - 11
  - 11.0998
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.5062
  - 11.6
  - 11.7
  - 11.8
  - 11.9
  - 11.9126
- 12
- 12～12.9
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.8938
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.4874
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.8938
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.2748
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.875
  - 15.88
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.4498
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.2626
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.05
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.6502
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.4376
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.225
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.4188
  - 23.5
  - 23.6
  - 23.7998
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.1874
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.0002
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7876
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.575
  - 28.8
- 29～29.8
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
  - 29.8
- 30～30.9626
  - 30
  - 30.1752
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
  - 30.9626
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.75
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.3502
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.8
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
- 36～36.8
  - 36
  - 36.4
  - 36.4998
  - 36.5
  - 36.8
- 37～37.6936
  - 37
  - 37.2
  - 37.5
  - 37.6
  - 37.6936
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.7002
  - 39
  - 39.2
  - 39.5
  - 39.6
  - 39.7002
- 40～40.8
  - 40
  - 40.4
  - 40.4876
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.28
  - 41.5
  - 41.6
- 42～42.8498
  - 42
  - 42.4
  - 42.5
  - 42.8
  - 42.8498
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.4312
  - 46.5
  - 46.8
- 47～47.8
  - 47
  - 47.2
  - 47.5
  - 47.6
  - 47.8
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.2252
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.1876
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57～57.5
  - 57
  - 57.15
  - 57.5
- 58～58.7502
  - 58
  - 58.5
  - 58.7502
- 59～59.5376
  - 59
  - 59.5
  - 59.5376
- 60～60.5
  - 60
  - 60.5
- 62
- 63～63.5
  - 63
  - 63.5
- 64
- 65
- 66
- 67
- 70～70.5
  - 70
  - 70.5
- 72
- 75
- 76
- 77.95
- 78
- 80
- 82
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 115
- 120
- 125
- 130
- 150
- 200
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

Outer Diameter 6/Bottom Blade 3

7

8

Outer Diameter 8/Bottom Blade 4

10

Outer Diameter 10/Bottom Blade 5

12

14

Outer Diameter 14/Bottom Blade 7

16

Outer Diameter 16/Bottom Blade 8

Bur End
Clear

Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Shank diameter (d)(mm)
1

1.5

2

2.9

3

3.17

3.175

3.8

4

4.75

4.8

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.53

9.7

9.8

10

11

11.7

12

12.7

13

14

15

15.5

15.7

15.88

16

17

18

19.05

19.3

19.7

20

22

24

24.2

25

25.4

30

32

42
Drawing

Clear

Overall Length (L)(mm)
30

35

36

37

38

38.1

39

40

41

42

43

45

48

49

50

50.8

51

52

53

54

55

57

58

60

62

63

63.5

64

65

66

67

68

69

70

72

73

74

75

76

76.2

79

80

82

83

84

85

86

87

88

88.9

89

90

92

93

94

95

97

99

100

101.6

104

105

107

108

109

110

111

112

113

115

118

120

121

123

124

125

126

127

128

130

135

140

145

150

152.4

153

155

156

160

165

170

175

177.8

180

185

190

200

210

215

220

225

230

240

250

260

265

270

280

300

310

320

350

800
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.8
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
- 1～1.8
  - 1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.5
  - 2
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11.25
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15～15.75
  - 15
  - 15.75
- 16～16.5
  - 16
  - 16.5
- 17.5
- 18
- 19～19.6
  - 19
  - 19.6
- 20
- 21
- 22
- 23
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35～35.3
  - 35
  - 35.3
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 57
- 58
- 60
- 62
- 63
- 64
- 65
- 66
- 67
- 70
- 74
- 75
- 76
- 79
- 80
- 82
- 85
- 94
- 99
- 100
- 108
- 120
- 125
- 130
- 140
- 150
- 200
[17-112/1mm Unit(s)]

Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15˚ to 25˚)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
- Variable lead
Drawing

Clear

Brand

- MISUMI (9)
- Cost Efficient Products ()
- OKAZAKI SEIKO (8)
- ASAHI TOOLS (7)
- DIJET (7)
- SANKO MFG (3)
- OSG (2)
- VAN_HOORN (2)
- KYOWA SEIKO (1)
- NACHI(FUJIKOSHI) (1)
- WIDIN (0)
- EIKOSHA (0)
- PROCHI (0)
- ATOM (0)
- KYOCERA (0)
- SANDVIK (0)
- NS TOOL (0)
- TAIYO-TOOL (0)
- TOYO DRILL (0)
- UNION TOOL (0)
- 7 LEADERS (0)
- GCT (0)
- GUHRING (0)
- THE CUT (0)
- SPEED TIGER (0)
Clear