Registro

¡Estamos traduciendo nuestra tienda online al español! 

Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Condiciones del filtro

Despejar todo

  • Stock
  • R Size(mm)
  • Blade length (ℓ)(mm)
    [5-30/1mm unidades]
  • Number of flutes(sheet)
    • CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)
      • Volume Discount

      SANDVIK

      CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)

      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      2 ~ 10BallGeneral Steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]11 ~ 384Other80 ~ 125-6 ~ 20
      Precio (IVA no incluido) a partir de:
      101.61 €
      Fecha de envío normal:
      6 días laborables
      Configurar
    • 2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S

        UNION TOOL

        2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S

        [Features] · Can be used for machining at short overhang lengths.
        Más información
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.1 ~ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.16 ~ 4.82-35 ~ 500.5 ~ 204 ~ 6
        Precio (IVA no incluido) a partir de:
        44.94 €
        Fecha de envío normal:
        6 días laborables
        Configurar
      • TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

        [Features] -High rigidity, 2 flute type with longitudinal taper-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Más información
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.15 ~ 5Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.3 ~ 82For High Hardness (Silicon Group)50 ~ 1101.5 ~ 604 ~ 12
        Precio (IVA no incluido) a partir de:
        33.49 €
        Fecha de envío normal:
        5 días laborables
        Configurar
      • UT Coat, 2-Flute Ball CSEB

          UNION TOOL

          UT Coat, 2-Flute Ball CSEB

          [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
          Más información
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          R0.05 ~ R6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]0.1 ~ 222TiCN50 ~ 110-4 ~ 12
          Precio (IVA no incluido) a partir de:
          38.11 €
          Fecha de envío normal:
          6 días laborables
          Configurar
        • SANDVIK CoroMill 216 Ball Nose Milling Cutter

            SANDVIK

            SANDVIK CoroMill 216 Ball Nose Milling Cutter

            [Specifications] - eClass-5.1: 21010503 - Milling Application: Profile milling cutter - Number of Insert Holders: 2 - Milling Cutter Type: CoroMill 216 Ball Nose Mill
            Más información
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            ---7.874 ~ 45.49--20 ~ 50-9.52 ~ 50.8
            Precio (IVA no incluido) a partir de:
            513.00 €
            Fecha de envío normal:
            5 días laborables
            Configurar
          • 2-Flute, Ball End, FX-MG-EBD
            • Volume Discount

            OSG

            2-Flute, Ball End, FX-MG-EBD

            Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.
            Más información
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ~ 15BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]2.5 ~ 552TiAlN50 ~ 180-4 ~ 25
            Precio (IVA no incluido) a partir de:
            91.40 €
            Fecha de envío normal:
            6 días laborables
            Configurar
          • Spherical Ball End GX-EQD-SF

              OSG

              Spherical Ball End GX-EQD-SF

              Ball end mills having spherical cutting tips developed for shrink fitting.
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              10Spherical BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]152For General Steels (AlCrN, etc.)58-12
              Precio (IVA no incluido) a partir de:
              142.46 €
              Fecha de envío normal:
              6 días laborables
              Configurar
            • 2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD
              • DESCUENTO
              • Volume Discount

              OSG

              2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD

              Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.08 ~ 62For General Steels (AlCrN, etc.)45 ~ 1200.3 ~ 503 ~ 6
              Precio (IVA no incluido) a partir de:
              49.20 €
              Precio especial
              Fecha de envío normal:
              Artículo en stock: 1 día laborable
              Algunos artículos se pueden enviar el mismo día
              Configurar
            • HSB, HM Coated 2-Flute Ball
              • DESCUENTO
              • Volume Discount
              • Stock

              UNION TOOL

              HSB, HM Coated 2-Flute Ball

              [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.03 ~ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.06 ~ 222For High Hardness (Silicon Group)50 ~ 110-4 ~ 12
              Precio (IVA no incluido) a partir de:
              37.04 €
              Precio especial
              Fecha de envío normal:
              Artículo en stock: 1 día laborable
              Algunos artículos se pueden enviar el mismo día
              Configurar
            • MSB230 MUGEN-COATING 2-Flute Ball End Mill
              • DESCUENTO
              • Volume Discount

              NS TOOL

              MSB230 MUGEN-COATING 2-Flute Ball End Mill

              Supports three-dimensional precision machining from low to high speeds
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.05 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.1 ~ 202TiAlN50 ~ 110-4 ~ 12
              Precio (IVA no incluido) a partir de:
              27.64 €
              Precio especial
              Fecha de envío normal:
              Artículo en stock: 1 día laborable
              Algunos artículos se pueden enviar el mismo día
              Configurar
            • MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill
              • Volume Discount

              NS TOOL

              MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill

              The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.1 ~ 2Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.2 ~ 42TiAlN50 ~ 1101 ~ 604 ~ 8
              Precio (IVA no incluido) a partir de:
              50.56 €
              Fecha de envío normal:
              6 días laborables
              Configurar
            • MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
              • DESCUENTO
              • Volume Discount

              NS TOOL

              MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

              Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.07 ~ 62TiAlN45 ~ 1200.3 ~ 504 ~ 6
              Precio (IVA no incluido) a partir de:
              30.38 €
              Precio especial
              Fecha de envío normal:
              Artículo en stock: 1 día laborable
              Algunos artículos se pueden enviar el mismo día
              Configurar
            • XAL series carbide ball end mill, 2-flute / short model
              • Volume Discount
              • XAL
              • General Steel
              • 2 Flutes

              MISUMI

              XAL series carbide ball end mill, 2-flute / short model

              XAL Series is the definitive choice for cost-sensitive customers
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.05 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]0.2 ~ 382For General Steels (AlCrN, etc.)40 ~ 160-3 ~ 20
              Precio (IVA no incluido) a partir de:
              14.53 €
              Fecha de envío normal:
              5 días laborables
              Configurar
            • TSC series carbide ball end mill, short model
              • Volume Discount
              • TS
              • General Steel
              • 2 Flutes
              • S (Short)

              MISUMI

              TSC series carbide ball end mill, short model

              [Features] -Good surface finish can be expected for the rough surface of the workpiece after machiningIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.05 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.2 ~ 252For High Hardness (Silicon Group)40 ~ 15015 ~ 753 ~ 20
              Fecha de envío normal:
              5 días laborables
              Configurar
            • TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
              • Volume Discount
              • TS
              • General Steel
              • 3 Flutes

              MISUMI

              TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

              [Features] -High feed, high rigidity 3-spiral taper shape with taper length-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.5 ~ 3Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ~ 63For High Hardness (Silicon Group)50 ~ 1107 ~ 604 ~ 8
              Fecha de envío normal:
              5 días laborables
              Configurar
            • TSC series carbide long neck ball end mill, 2-flute / long neck model
              • Volume Discount
              • TS
              • General Steel
              • 2 Flutes

              MISUMI

              TSC series carbide long neck ball end mill, 2-flute / long neck model

              [Features] -Long neck shape suitable for deep cavity milling-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.07 ~ 82For High Hardness (Silicon Group)40 ~ 1100.2 ~ 603 ~ 8
              Fecha de envío normal:
              5 días laborables
              Configurar
            • Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)
              • Volume Discount
              • DIA
              • Graphite
              • 2 Flutes

              MISUMI

              Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

              Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.2 ~ 3Long-Neck BallAluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]0.6 ~ 7.52Dia Coat50 ~ 1102 ~ 604 ~ 6
              Precio (IVA no incluido) a partir de:
              87.71 €
              Fecha de envío normal:
              5 días laborables
              Configurar
            • MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model
              • Volume Discount
              • MR
              • General Steel
              • 2 Flutes
              • R (Regular)

              MISUMI

              MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

              The user friendly regular flute length type is released simultaneously
              Más información
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.2 ~ 8BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]1.5 ~ 302MRC50 ~ 140-4 ~ 16
              Precio (IVA no incluido) a partir de:
              22.98 €
              Fecha de envío normal:
              5 días laborables
              Configurar
            • HBL, HM Coated 2-Flute Long Shank Ball

                UNION TOOL

                HBL, HM Coated 2-Flute Long Shank Ball

                [Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type
                Más información
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                1.5 ~ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]4.5 ~ 252For High Hardness (Silicon Group)80 ~ 200-3 ~ 12
                Precio (IVA no incluido) a partir de:
                110.99 €
                Fecha de envío normal:
                8 días laborables
                Configurar
              • HTNB HM Coated High-Precision Taper Neck Ball
                • DESCUENTO

                UNION TOOL

                HTNB HM Coated High-Precision Taper Neck Ball

                [Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut
                Más información
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.1 ~ 2Tapered neck ballGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.16 ~ 3.22For High Hardness (Silicon Group)50 ~ 1201.5 ~ 624 ~ 6
                Precio (IVA no incluido) a partir de:
                69.30 €
                Precio especial
                Fecha de envío normal:
                Artículo en stock: 1 día laborable
                Algunos artículos se pueden enviar el mismo día
                Configurar
              • DCB 2-Flute Diamond-Coated Ball for Graphite Processing

                  UNION TOOL

                  DCB 2-Flute Diamond-Coated Ball for Graphite Processing

                  [Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
                  Más información
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.5 ~ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]5 ~ 552Dia Coat60 ~ 180-4 ~ 12
                  Precio (IVA no incluido) a partir de:
                  277.34 €
                  Fecha de envío normal:
                  6 días laborables
                  Configurar
                • DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing
                  • DESCUENTO

                  UNION TOOL

                  DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing

                  [Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
                  Más información
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.2 ~ 3Long-Neck BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]0.32 ~ 62Dia Coat45 ~ 1202 ~ 804 ~ 6
                  Precio (IVA no incluido) a partir de:
                  105.36 €
                  Precio especial
                  Fecha de envío normal:
                  Artículo en stock: 1 día laborable
                  Algunos artículos se pueden enviar el mismo día
                  Configurar
                • UT COAT 2-Flute Long-Neck Ball CSLEB
                  • DESCUENTO

                  UNION TOOL

                  UT COAT 2-Flute Long-Neck Ball CSLEB

                  [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
                  Más información
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.05 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]0.08 ~ 4.82TiCN45 ~ 1200.3 ~ 603 ~ 6
                  Precio (IVA no incluido) a partir de:
                  45.25 €
                  Precio especial
                  Fecha de envío normal:
                  Artículo en stock: 1 día laborable
                  Algunos artículos se pueden enviar el mismo día
                  Configurar
                • HM Coated 2-Flute, Long Neck Ball HSLB
                  • DESCUENTO
                  • Volume Discount
                  • Stock

                  UNION TOOL

                  HM Coated 2-Flute, Long Neck Ball HSLB

                  [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
                  Más información
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.2 ~ 2Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.32 ~ 3.22For High Hardness (Silicon Group)45 ~ 701 ~ 163 ~ 4
                  Precio (IVA no incluido) a partir de:
                  28.03 €
                  Precio especial
                  Fecha de envío normal:
                  Artículo en stock: 1 día laborable
                  Posible envío el mismo día
                  Configurar
                • WXL-Coated 2-Flute Ball End Type WXL-EBD
                  • DESCUENTO
                  • Volume Discount

                  OSG

                  WXL-Coated 2-Flute Ball End Type WXL-EBD

                  [Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.
                  Más información
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.05 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.2 ~ 382For General Steels (AlCrN, etc.)40 ~ 160-4 ~ 20
                  Precio (IVA no incluido) a partir de:
                  49.20 €
                  Precio especial
                  Fecha de envío normal:
                  Artículo en stock: 1 día laborable
                  Algunos artículos se pueden enviar el mismo día
                  Configurar
                • Solid Ball End Mill SBEL
                  • Volume Discount

                  DIJET

                  Solid Ball End Mill SBEL

                  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                  Más información
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.5 ~ 15BallGeneral Steel[○] / Quenched and tempered steel[○] / Graphite[○]5 ~ 802Non-Coated45 ~ 150-4 ~ 32
                  Precio (IVA no incluido) a partir de:
                  107.03 €
                  Fecha de envío normal:
                  8 días laborables
                  Configurar
                • Carbide Solid Ball End Mill CSBE
                  • Volume Discount

                  EIKOSHA

                  Carbide Solid Ball End Mill CSBE

                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.4 ~ 20BallGeneral Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]3 ~ 702-45 ~ 180-4 ~ 32
                  Precio (IVA no incluido) a partir de:
                  99.57 €
                  Fecha de envío normal:
                  6 días laborables
                  Configurar
                • EPL-SB-LN-EBD, Carbide end mill

                    OSG

                    EPL-SB-LN-EBD, Carbide end mill

                    Carbide end mill - For general applications - 2 flutes, long neck, ball nose
                    Más información
                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                    ---------
                    Precio (IVA no incluido) a partir de:
                    44.60 €
                    Fecha de envío normal:
                    4 días laborables
                    Configurar
                  • SANDVIK CoroMill 216F Ball Nose Milling Cutter

                      SANDVIK

                      SANDVIK CoroMill 216F Ball Nose Milling Cutter

                      [Specifications] - Milling Cutter Tool Chuck Type: Straight shank - eClass-5.1: 21010503 - Milling Application: Profile milling cutter
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      ---1.2 ~ 4.8----8 ~ 30/32
                      Precio (IVA no incluido) a partir de:
                      450.15 €
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill (R accuracy ±3μm)
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide ball end mill (R accuracy ±3μm)

                      [Features] -Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      1.5 ~ 3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ~ 92For High Hardness (Silicon Group)60 ~ 90-6
                      Precio (IVA no incluido) a partir de:
                      48.69 €
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

                      [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.3 ~ 2BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ~ 42For High Hardness (Silicon Group)40-6
                      Precio (IVA no incluido) a partir de:
                      66.91 €
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

                      [Features] -Compatible with shrink fit chucks for high precision machining-Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.2 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.4 ~ 122For High Hardness (Silicon Group)40 ~ 65-4 ~ 12
                      Precio (IVA no incluido) a partir de:
                      25.08 €
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • XAC series carbide ball end mill, 2-flute / short model
                      • Volume Discount
                      • TiAlN
                      • General Steel
                      • 2 Flutes
                      • S (Short)

                      MISUMI

                      XAC series carbide ball end mill, 2-flute / short model

                      [Features] All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling-For rough machining of workpieces that are expected to have a good surface finish after machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.2 ~ 12.5BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ~ 502TiAlN40 ~ 180-3 ~ 25
                      Precio (IVA no incluido) a partir de:
                      22.45 €
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • XAC series carbide ball end mill, 2-flute / short, long shank model
                      • Volume Discount
                      • TiAlN
                      • General Steel
                      • 2 Flutes

                      MISUMI

                      XAC series carbide ball end mill, 2-flute / short, long shank model

                      [Features] -Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation-For rough machining of the workpiece, a good surface finish can be expected after machining.-Long shank type, ideal for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      2 ~ 8BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]8 ~ 302TiAlN100 ~ 250-4 ~ 16
                      Precio (IVA no incluido) a partir de:
                      43.83 €
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill, regular model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • R (Regular)

                      MISUMI

                      TSC series carbide ball end mill, regular model

                      [Features] -Regular bridge length allows for many regrinding times-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.2 ~ 8BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ~ 302For High Hardness (Silicon Group)50 ~ 14017 ~ 804 ~ 16
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill, 2-flute / short, long shank model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide ball end mill, 2-flute / short, long shank model

                      [Features] -Long shank, ideal for deep cavity millingIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.5 ~ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 302For High Hardness (Silicon Group)70 ~ 28015 ~ 803 ~ 25
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

                      A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.5 ~ 5Long-Neck Ball / Spherical BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-2For High Hardness (Silicon Group)70 ~ 904 ~ 556 ~ 10
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill, 3-flute / short model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 3 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide ball end mill, 3-flute / short model

                      [Features] -The 3-edge shape is resistant to chattering and enables high feed rate-The surface of the workpiece is very well finished after machining.-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.5 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 253For High Hardness (Silicon Group)50 ~ 15015 ~ 756 ~ 20
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill, 3-flute / regular model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 3 Flutes
                      • R (Regular)

                      MISUMI

                      TSC series carbide ball end mill, 3-flute / regular model

                      [Features] -The 3-edge shape is chatter resistant and enables high feed-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      1 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 223For High Hardness (Silicon Group)50 ~ 11017 ~ 726 ~ 12
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill, short model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide ball end mill, short model

                      [Features] -The surface of the workpiece is very good after machining.-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      1 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 254For High Hardness (Silicon Group)50 ~ 15015 ~ 756 ~ 20
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide ball end mill, 4-flute / regular model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • R (Regular)

                      MISUMI

                      TSC series carbide ball end mill, 4-flute / regular model

                      [Features] -The surface of the workpiece is very good after machining.-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      1.5 ~ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 224For High Hardness (Silicon Group)60 ~ 11017 ~ 726 ~ 12
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • Carbide ball end mill, 2-flute / short model
                      • Volume Discount
                      • Non-Coated
                      • General Steel
                      • 2 Flutes
                      • S (Short)

                      MISUMI

                      Carbide ball end mill, 2-flute / short model

                      Highly versatile due to the non-coated specification
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.2 ~ 10BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]0.8 ~ 252Non-Coated40 ~ 150-3 ~ 20
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide long neck ball end mill, 3-flute / long neck model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 3 Flutes

                      MISUMI

                      TSC series carbide long neck ball end mill, 3-flute / long neck model

                      [Features] -Long-neck ball with 3 cutting edges, suitable for high-speed machining of deep cutting areas-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.5 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ~ 4.82 ~ 3For High Hardness (Silicon Group)50 ~ 1103 ~ 504 ~ 6
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TSC series carbide long neck ball end mill, 4-flute / long neck model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes

                      MISUMI

                      TSC series carbide long neck ball end mill, 4-flute / long neck model

                      [Features] -Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      1 ~ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.6 ~ 64For High Hardness (Silicon Group)50 ~ 704 ~ 304 ~ 6
                      Fecha de envío normal:
                      5 días laborables
                      Configurar
                    • TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 2 Flutes

                      MISUMI

                      TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

                      [Features] -Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
                      Más información
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      1 ~ 5BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]1 ~ 52For High Hardness (Silicon Group)50 ~ 905 ~ 106 ~ 10
                      Precio (IVA no incluido) a partir de:
                      108.89 €
                      Fecha de envío normal:
                      5 días laborables
                      Configurar