Carbide Ball End Mills（work material：High Hardness Steel: to HRC55 Page 2）

Search by sub-category

106

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

2-Flute, Ball End, WXS-EBD

OSG

High-precision ball end mill that was subjected to a WX super coat of super-hard and ultra-heat. High-speed machining of general steel, of course, but even suitable for high speed direct carving machining of hardened steel.

Select to compare

Configure now
Starting from^∗ ：	30.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD

OSG

WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End (High Precision Type) FX-EBD-6

OSG

High precision ball end mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center. Ultra-fine carbide based material achieves long tool life in hardened steel high-speed machining.

Select to compare

Configure now
Starting from^∗ ：	89.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Shank, Ball End, FX-LS-MG-EBD

OSG

Depth of long shank can be processed

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS

OSG

Ball end mill for heavy cutting that allows high-speed, high-efficiency (large depth of the cut) machining. Shrink-HSK Just Fit short overall length types.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD

OSG

Ultra-high accuracy precision grade of ball end mill series for carpentes. Short overall length of shrink-fit holder. HP3 spec comes with a product precision guarantee.

Select to compare

Configure now
Starting from^∗ ：	86.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD

OSG

Oil hole is quite useful in the machining of deep parts with chip emission problem.

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS

OSG

Extremely increased rigidity ball end mill with oil hole for high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

OSG

Quality cutting is provided even in large protruding length, due to high rigidity pencil neck.

Select to compare

Configure now
Starting from^∗ ：	84.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD

OSG

[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	63.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

OSG

Ball end mill for deep engraving work that ordinary end mills can't reach.

Select to compare

Configure now
Starting from^∗ ：	239.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT

OSG

Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.

Select to compare

Configure now
Starting from^∗ ：	83.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

OSG

New concept ball end mill with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.

Select to compare

Configure now
Starting from^∗ ：	84.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD

OSG

Achieves stable cutting with not only HSK holders but also with L / D large shrink long arbors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck, Ball End CBN-LN-SXB

OSG

2-Flute Long Neck Ball End Type CBN-LN-SXB
-Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral cutting, both cutting edge strength and sharpness are achieved.
-CBN sintered body is used for flute material.

Select to compare

Configure now
Starting from^∗ ：	110.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

OSG

WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions

Select to compare

Configure now
Starting from^∗ ：	20.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD

OSG

Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	57.40 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD

OSG

Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

OSG

Long neck ball with choice of effective length according to machining form. High tenacity cemented carbide base material achieves a stable cutting in wide range of machining applications.

Select to compare

Configure now
Starting from^∗ ：	35.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)

UNION TOOL

[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.34 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HBL, HM Coated 2-Flute Long Shank Ball

UNION TOOL

[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet type

Select to compare

Configure now
Starting from^∗ ：	110.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

HLB, HM Coated 2-Flute Long Neck Ball

UNION TOOL

[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications

Select to compare

Configure now
Starting from^∗ ：	48.19 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

HTNB HM Coated High-Precision Taper Neck Ball

UNION TOOL

[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cut

Select to compare

Configure now
Starting from^∗ ：	69.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSB345 3-Flute Ball-End Mill

NS TOOL

Enables efficient machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	71.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSB200 CBN Super Speed Ball End Mill

NS TOOL

High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of use

Select to compare

Configure now
Starting from^∗ ：	160.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSBL200 CBN Super Speed Long Neck Ball End Mill

NS TOOL

Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

Select to compare

Configure now
Starting from^∗ ：	166.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SFB200 CBN Super Finish Ball End Mill

NS TOOL

The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

Select to compare

Configure now
Starting from^∗ ：	200.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)

NS TOOL

Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MRBH230 Long-Neck Ball, Hard (for High Hardness)

NS TOOL

The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	32.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSBH230 2-Flute Ball-End Mill for High-Hardness

NS TOOL

Standard type ball end mill for high hardness. Ideal for finishing

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	31.61 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

NS TOOL

The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

Select to compare

Configure now
Starting from^∗ ：	239.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

NS TOOL

Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

NS TOOL

Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

MSB230S MUGEN-COATING Short Ball End Mill

NS TOOL

The high-rigidity design enables high speed machining without chattering

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill

NS TOOL

The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

NS TOOL

Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSBL230 MUGEN-COATING Long Ball End Mill

NS TOOL

Machining utilizing the benefits of a long shank is possible

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels

NS TOOL

Large cutting depth can be set, with effective high-speed feed

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

UT Coat, 2-Flute Ball CSEB

UNION TOOL

[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.

Select to compare

Configure now
Starting from^∗ ：	38.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X Coated Ball-End Mill NSB-2X

NS TOOL

Ideal for high-precision 3D processing. A universal type for roughing, semi-finishing and finishing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230

NS TOOL

Infinity coating has been adopted for the extra long ball end mill. Machining utilizing the benefits of a long shank is possible

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	128.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck

OSG

A long neck ball nose cutter with WXS coating.
A corner radius shape that achieves both cutting force and cutting edge rigidity.
Peripheral cutting edge and undercutting specifications to suppress chatter vibration.
A special edge line prevents interference.
Optimum chip groove for excellent chip evacuation.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	62.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

OKAZAKI SEIKO

Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.35 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated

OKAZAKI SEIKO

Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

One Cut Ball (Slim Shank) DZ-OCUB

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Select to compare

Configure now
Starting from^∗ ：	93.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	NS TOOL	OSG	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET
Product Series	2-Flute, Ball End, WXS-EBD	2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD	2-Flute, Ball End (High Precision Type) FX-EBD-6	2-Flute, Long Shank, Ball End, FX-LS-MG-EBD	2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS	2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD	2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD	2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS	2-Flute Pencil Neck, Ball End FX-PC-MG-EBD	WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD	2-Flute Pencil Long Neck, Ball End FX-PCL-EBD	3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT	3-Flute Ball End, High-Cut High-Feed Type PHX-DBT	For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD	2-Flute Long Neck, Ball End CBN-LN-SXB	2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD	2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD	2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD	2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD	HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)	HBL, HM Coated 2-Flute Long Shank Ball	HLB, HM Coated 2-Flute Long Neck Ball	HTNB HM Coated High-Precision Taper Neck Ball	MSB345 3-Flute Ball-End Mill	SSB200 CBN Super Speed Ball End Mill	SSBL200 CBN Super Speed Long Neck Ball End Mill	SFB200 CBN Super Finish Ball End Mill	MACH225SF Short Shank, for High-Speed and High-Hardness Processing, Ball End Mill (for Thermal Insert)	MRBH230 Long-Neck Ball, Hard (for High Hardness)	MSBH230 2-Flute Ball-End Mill for High-Hardness	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)	MSB230S MUGEN-COATING Short Ball End Mill	MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	MSBL230 MUGEN-COATING Long Ball End Mill	MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels	UT Coat, 2-Flute Ball CSEB	X Coated Ball-End Mill NSB-2X	MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230	Carbide Long Neck Ball Series WXS Coat 3-Flute Long Neck	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated	One Cut Ball (Slim Shank) DZ-OCUB
Starting from^∗	30.41 € *Unit price with basic configuration	41.80 € *Unit price with basic configuration Volume Discount	89.48 € *Unit price with basic configuration	101.29 € *Unit price with basic configuration	87.89 € *Unit price with basic configuration Volume Discount	86.67 € *Unit price with basic configuration	91.40 € *Unit price with basic configuration	95.68 € *Unit price with basic configuration Volume Discount	84.69 € *Unit price with basic configuration	63.80 € *Unit price with basic configuration Volume Discount	239.02 € *Unit price with basic configuration	83.42 € *Unit price with basic configuration	84.50 € *Unit price with basic configuration	83.15 € *Unit price with basic configuration Volume Discount	110.50 € *Unit price with basic configuration	20.02 € *Unit price with basic configuration	57.40 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	49.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	35.60 € *Unit price with basic configuration	43.34 € Special price *Unit price with basic configuration Promotional pricing	110.99 € *Unit price with basic configuration	48.19 € *Unit price with basic configuration	69.30 € Special price *Unit price with basic configuration Promotional pricing	71.66 € *Unit price with basic configuration Volume Discount	160.01 € *Unit price with basic configuration	166.68 € *Unit price with basic configuration	200.00 € *Unit price with basic configuration	45.91 € *Unit price with basic configuration Volume Discount	32.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	31.61 € *Unit price with basic configuration Volume Discount	239.99 € *Unit price with basic configuration	37.33 € *Unit price with basic configuration Volume Discount	36.37 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	43.04 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	52.58 € *Unit price with basic configuration Volume Discount	31.61 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	110.77 € *Unit price with basic configuration Volume Discount	52.58 € *Unit price with basic configuration Volume Discount	38.11 € *Unit price with basic configuration	78.34 € *Unit price with basic configuration Volume Discount	128.70 € *Unit price with basic configuration Volume Discount	62.70 € *Unit price with basic configuration Volume Discount	101.35 € *Unit price with basic configuration Volume Discount	23.34 € *Unit price with basic configuration Volume Discount	93.50 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	8 Days	6 Days	7 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	6 Days	Same day	Same day	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	10 Days	6 Days	6 Days
Specifications																													Stock	Stock
R Size(mm)	0.75 ～ 2	0.1 ～ 6	0.1 ～ 3	3	0.5 ～ 6	4	3 ～ 10	3 ～ 10	0.3 ～ 6	0.1 ～ 6	2 ～ 6	0.5 ～ 6	0.5 ～ 10	0.5 ～ 6	0.2 ～ 1.5	0.3 ～ 1.5	0.1 ～ 3	0.05 ～ 3	0.1 ～ 3	0.1 ～ 0.75	1.5 ～ 6	0.4 ～ 3	0.1 ～ 2	0.5 ～ 6	0.1 ～ 1	0.05 ～ 1	0.1 ～ 1	0.1 ～ 3	0.05 ～ 3	0.05 ～ 6	0.01 ～ 0.05	0.1 ～ 6	0.1 ～ 1.5	0.1 ～ 6	0.1 ～ 2	0.05 ～ 3	0.1 ～ 5	0.1 ～ 3	0.1 ～ 6	1 ～ 6	0.5 ～ 5	0.5 ～ 3	1 ～ 12.5	0.5 ～ 12.5	3
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Tapered neck ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Tapered neck ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball
work material	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[◎]	High Hardness Steel: to HRC55[○]	High Hardness Steel: to HRC55[○]
Blade length (ℓ)(mm)	1.5 ～ 4	0.4 ～ 18	0.2 ～ 6	12	1 ～ 12	8	12 ～ 38	6 ～ 20	0.6 ～ 22	0.16 ～ 12	8 ～ 22	1.5 ～ 18	1.5 ～ 30	1 ～ 12	0.3 ～ 1.8	0.5 ～ 2.4	0.16 ～ 4.8	0.08 ～ 6	0.16 ～ 4.8	0.3 ～ 2.5	4.5 ～ 25	0.64 ～ 4.8	0.16 ～ 3.2	1.5 ～ 20	0.15 ～ 1.2	0.08 ～ 1.2	0.15 ～ 1.2	0.2 ～ 6	0.07 ～ 6	0.1 ～ 20	0.02 ～ 0.1	0.2 ～ 12	0.15 ～ 2.5	0.2 ～ 12	0.2 ～ 4	0.07 ～ 6	0.5 ～ 25	0.2 ～ 6	0.3 ～ 18	3 ～ 15	2.5 ～ 25	0.75 ～ 4.5	2 ～ 60	2 ～ 55	9
Number of flutes(sheet)	2	2	2	2	2	2	2	2	2	2	2	3	3	2	2	2	2	2	2	2	2	2	2	3	2	2	2	2	2	2	1	2	2	2	2	2	2	2	2	2	2	3	2	2	2
Coating	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiCN	TiCN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN
Overall Length (L)(mm)	50 ～ 60	35 ～ 70	50	140	50 ～ 80	60	90 ～ 160	90 ～ 160	60 ～ 160	45 ～ 160	200 ～ 250	60 ～ 220	60 ～ 200	50 ～ 80	45 ～ 50	35 ～ 40	45 ～ 90	45 ～ 120	45 ～ 120	50	80 ～ 200	45 ～ 80	50 ～ 120	60 ～ 120	52 ～ 53	50 ～ 53	50 ～ 52	35 ～ 45	45 ～ 120	50 ～ 100	50	35 ～ 60	35 ～ 50	50 ～ 110	50 ～ 110	45 ～ 120	70 ～ 200	50 ～ 60	50 ～ 110	60 ～ 110	100 ～ 250	50 ～ 70	80 ～ 230	60 ～ 180	120
Underneck length (ℓ1)(mm)	3 ～ 8	-	1.1 ～ 9	-	2.5 ～ 30	16	-	-	10 ～ 80	1 ～ 80	100 ～ 140	6 ～ 160.8	-	2.5 ～ 30	2 ～ 15	1.5 ～ 12	0.5 ～ 40	0.3 ～ 50	0.5 ～ 50	-	-	3 ～ 30	1.5 ～ 62	-	0.3 ～ 5	0.3 ～ 10	0.5 ～ 5	0.5 ～ 15	0.2 ～ 50	-	-	-	0.5 ～ 20	-	1 ～ 60	0.3 ～ 50	-	0.5 ～ 15	-	-	-	4 ～ 30	14 ～ 21	-	-
Shank diameter (d)(mm)	4	4 ～ 12	6	6	6 ～ 12	8	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 16	10 ～ 16	6 ～ 20	6 ～ 20	6 ～ 12	4 ～ 6	4	4 ～ 6	3 ～ 6	4 ～ 6	4	3 ～ 12	4 ～ 6	4 ～ 6	6 ～ 12	4	4	4	4 ～ 6	4 ～ 6	4 ～ 12	4	4 ～ 12	4	4 ～ 12	4 ～ 8	4 ～ 6	3 ～ 10	4 ～ 6	4 ～ 12	4 ～ 12	3 ～ 10	4 ～ 6	6 ～ 25	4 ～ 25	5
R Precision(μm)	-0.007～+0.007 ～ -0.005～+0.005	-0.007～+0.003 ～ -0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.015～+0.015 ～ -0.01	-0.003～+0.003	-0.01～+0.01	-0.01～+0.01	-0.01～0.01	-0.005 to +0.005 ～ -0.005～+0.005	-0.01～0.01	-	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005	-0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.005～0.005	-0.007～0.007 ～ -0.005～0.005	-0.002～0.002	-0.005～0.005	0.01～-0.01	0.005～-0.005 ～ 3 to -3	0.005～-0.005	0.003～-0.003 ～ 0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	-	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-0.007～0.007 ～ -0.005～0.005	0.01～-0.01 ～ 0.02～-0.02	0.02～-0.02	±0.07	-	-10～+10	10～-10
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / R Groove

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.9
- 18
- 19
- 20
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
[5-30/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

160

170

175

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25
- 26～26.8
  - 26
  - 26.8
- 27
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.5
  - 31
  - 31.5
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.2
  - 44
  - 44.2
- 45～45.2
  - 45
  - 45.2
- 46～46.5
  - 46
  - 46.5
- 47.5
- 48～48.9
  - 48
  - 48.9
- 49
- 50
- 52
- 54～54.5
  - 54
  - 54.5
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
[4-80/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7.80

7.94

8

9.52

9.70

10

11.70

12

12.7

14

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.03

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear