Carbide Ball End Mills（work material：High Hardness Steel: to HRC60）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

MSBH345 3-Flute Ball-End Mill for High-Hardness

NS TOOL

Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

HSB, HM Coated 2-Flute Ball

UNION TOOL

[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	37.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Single Cut Ball 70 End Mill DH-OCHB Type

DIJET

[Features]
· One mill for roughing to finishing high-hardness material.
· 4-blade solid ball end mill, capable of machining even 70 HRC hardness.
· Reduces chattering by using high tool rigidity and unequal divisions.
· Implements good cutting performance with low resistance, with a torsion angle of 45°.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	105.49 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

NS TOOL

Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.37 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

NS TOOL

Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

HM Coated 2-Flute, Long Neck Ball HSLB

UNION TOOL

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	28.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

MISUMI

The user friendly regular flute length type is released simultaneously

Volume Discount

MR
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	22.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

2-Flute, Ball End, FX-MG-EBD

OSG

Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT

OSG

Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.

Select to compare

Configure now
Starting from^∗ ：	83.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spherical Ball End FXS-EQD

OSG

Spherical cutting edge prevent chattering in the machining of standing wall. Machining undercut enabled.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	121.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSB200 CBN Super Speed Ball End Mill

NS TOOL

High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of use

Select to compare

Configure now
Starting from^∗ ：	160.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSPB220 CBN Super Spiral Ball End Mill

NS TOOL

[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°

Select to compare

Configure now
Starting from^∗ ：	172.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63)

SANDVIK

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	160.55 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

MISUMI

[Features]
-Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).
-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	113.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

MISUMI

The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

Volume Discount

TS
High-Hardness Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.27 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

MISUMI

[Features]
The shape with 3 flutes and short flute length prevents chatter and enables high feed machining
The tapered neck effectively suppresses chatter
Machining of high hardness steel up to 65HRC is possible
The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes

Select to compare

Configure now
Starting from^∗ ：	71.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

CBN Ball End Mill, 2-Flute

MISUMI

CBN ball end mill that's ideal for precision finishing is available at a value price

Volume Discount

High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	136.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

MISUMI

High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

Volume Discount

MR
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	18.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

MISUMI

High-performance MRC series is available in the industry's largest number of sizes

Volume Discount

MR
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	19.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

GS MILL Long Neck Hard Ball GSBNH2

NACHI(FUJIKOSHI)

Suitable for microfabrication of mold. A variety of size alignment allows for multiple types of machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	47.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo Ball Long Shank 2GEOLSR

NACHI(FUJIKOSHI)

[Features]
A carbide end mill with 2 cutting edges.
The high cutting speed and high production efficiency result in a reduction in overall production costs.
The long shank enables contour milling in deep places and can be extended depending on the application.
[Features]
Suitable for side milling, milling of curved surfaces, engraving and R-slot milling.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	118.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CBN Mold Finish Master BNBP

NACHI(FUJIKOSHI)

-CBN ball nose end mill.
-Suitable for high speed finishing of tools made of high hardness materials.

Select to compare

Configure now
Starting from^∗ ：	339.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GS MILL Hard Ball GSBH

NACHI(FUJIKOSHI)

Suitable for high-speed finishing of high hardness material machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	112.06 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GS MILL Ball 2GSR

NACHI(FUJIKOSHI)

Supports a wide variety of materials such as green wood and hardened steel. Suitable for diemilling metal molds.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	131.29 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Mold Meister Ball 2MMR

NACHI(FUJIKOSHI)

Ideal for polishing of precision molds. R accuracy ± 3μm, R accuracy range 180 °

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	188.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo Ball 2GEOR

NACHI(FUJIKOSHI)

Supports a wide range of materials such as molded steel to high hardness steel. Suitable for mold finish machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Slim Shank, Ball End, FX-SS-EBD

OSG

Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	245.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Pencil Short Neck, Ball End (High Precision Type) FX-PCS-EBD-6

OSG

High pencil neck of stiffness and ultra-fine cemented carbide achieves high-speed, high-precision, ultra-life. Eliminate chatter problems in fine shape processing and dug processing.

Select to compare

Configure now
Starting from^∗ ：	83.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, Miniature, FX-MG-EBD-3

OSG

The use of FX coating and high strength carbide allows a wide range of machining.
Coated for steel
Standard/Alternation category: Manufacturer's standard product
Number of blades (pcs.) 2
Shaft diameter (mm) 3, Total length (mm) 40, Spiral angle: standard spiral (30 to 44°)
R Accuracy (µm) ±10.

Select to compare

Configure now
Starting from^∗ ：	84.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, CBN-EBD

OSG

2-Flute Ball End Type CBN-EBD
-Demonstrates high performance when machining high strength materials and cast iron
-The wide selection of CBN tools allows you to choose the best tool for your application.

Select to compare

Configure now
Starting from^∗ ：	235.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, CBN-SXB

OSG

Spiral ball blade with its own twist achieve deep cuts in acute sharpness and small diameter. CBN end mill that can be used in the cut of the Carbide

Select to compare

Configure now
Starting from^∗ ：	125.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, WX-EBD

OSG

General-purpose ball end mill for a wide range of workpieces and machining. High toughness carbide-based materials achieve a stable long-term continuous machining.

Select to compare

Configure now
Starting from^∗ ：	33.32 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, WXS-EBD

OSG

High-precision ball end mill that was subjected to a WX super coat of super-hard and ultra-heat. High-speed machining of general steel, of course, but even suitable for high speed direct carving machining of hardened steel.

Select to compare

Configure now
Starting from^∗ ：	30.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End (High Precision Type) FX-EBD-6

OSG

High precision ball end mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center. Ultra-fine carbide based material achieves long tool life in hardened steel high-speed machining.

Select to compare

Configure now
Starting from^∗ ：	89.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long Shank, Ball End, FX-LS-MG-EBD

OSG

Depth of long shank can be processed

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	88.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS

OSG

Ball end mill for heavy cutting that allows high-speed, high-efficiency (large depth of the cut) machining. Shrink-HSK Just Fit short overall length types.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	87.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD

OSG

Ultra-high accuracy precision grade of ball end mill series for carpentes. Short overall length of shrink-fit holder. HP3 spec comes with a product precision guarantee.

Select to compare

Configure now
Starting from^∗ ：	86.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD

OSG

Oil hole is quite useful in the machining of deep parts with chip emission problem.

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS

OSG

Extremely increased rigidity ball end mill with oil hole for high hardness steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

OSG

Quality cutting is provided even in large protruding length, due to high rigidity pencil neck.

Select to compare

Configure now
Starting from^∗ ：	84.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

OSG

Ball end mill for deep engraving work that ordinary end mills can't reach.

Select to compare

Configure now
Starting from^∗ ：	239.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Long Shank Ball End (High-Efficacy) FXS-LS-EBT

OSG

In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.

Select to compare

Configure now
Starting from^∗ ：	104.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Pencil Neck, Ball End (High-Efficacy) FXS-PC-EBT

OSG

In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.

Select to compare

Configure now
Starting from^∗ ：	91.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Ball End (High-Efficacy) FXS-EBT

OSG

Allows high efficiency machining with up to 50% increased table feed due to the ball geometry formed by 3-blades to the center.

Select to compare

Configure now
Starting from^∗ ：	83.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

OSG

New concept ball end mill with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.

Select to compare

Configure now
Starting from^∗ ：	84.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	NS TOOL	UNION TOOL	DIJET	NS TOOL	NS TOOL	UNION TOOL	MISUMI	OSG	OSG	OSG	NS TOOL	NS TOOL	SANDVIK	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	MSBH345 3-Flute Ball-End Mill for High-Hardness	HSB, HM Coated 2-Flute Ball	Single Cut Ball 70 End Mill DH-OCHB Type	MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	HM Coated 2-Flute, Long Neck Ball HSLB	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	2-Flute, Ball End, FX-MG-EBD	3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT	Spherical Ball End FXS-EQD	SSB200 CBN Super Speed Ball End Mill	SSPB220 CBN Super Spiral Ball End Mill	Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63)	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	CBN Ball End Mill, 2-Flute	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model	GS MILL Long Neck Hard Ball GSBNH2	X's Mill Geo Ball Long Shank 2GEOLSR	CBN Mold Finish Master BNBP	GS MILL Hard Ball GSBH	GS MILL Ball 2GSR	Mold Meister Ball 2MMR	X's Mill Geo Ball 2GEOR	2-Flute, Slim Shank, Ball End, FX-SS-EBD	2-Flute, Pencil Short Neck, Ball End (High Precision Type) FX-PCS-EBD-6	2-Flute, Ball End, Miniature, FX-MG-EBD-3	2-Flute, Ball End, CBN-EBD	2-Flute, Ball End, CBN-SXB	2-Flute, Ball End, WX-EBD	2-Flute, Ball End, WXS-EBD	2-Flute, Ball End (High Precision Type) FX-EBD-6	2-Flute, Long Shank, Ball End, FX-LS-MG-EBD	2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS	2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD	2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD	2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS	2-Flute Pencil Neck, Ball End FX-PC-MG-EBD	2-Flute Pencil Long Neck, Ball End FX-PCL-EBD	3-Flute Long Shank Ball End (High-Efficacy) FXS-LS-EBT	3-Flute Pencil Neck, Ball End (High-Efficacy) FXS-PC-EBT	3-Flute Ball End (High-Efficacy) FXS-EBT	3-Flute Ball End, High-Cut High-Feed Type PHX-DBT
Starting from^∗	96.47 € *Unit price with basic configuration Volume Discount	37.04 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	105.49 € *Unit price with basic configuration Volume Discount	36.37 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	31.61 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	28.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	22.05 € *Unit price with basic configuration Volume Discount	91.40 € *Unit price with basic configuration Volume Discount	83.42 € *Unit price with basic configuration	121.20 € *Unit price with basic configuration Volume Discount	160.01 € *Unit price with basic configuration	172.90 € *Unit price with basic configuration	160.55 € *Unit price with basic configuration Volume Discount	113.26 € *Unit price with basic configuration Volume Discount	64.27 € *Unit price with basic configuration Volume Discount	71.52 € *Unit price with basic configuration Volume Discount	136.38 € *Unit price with basic configuration Volume Discount	18.61 € *Unit price with basic configuration Volume Discount	19.88 € *Unit price with basic configuration Volume Discount	47.98 € *Unit price with basic configuration Volume Discount	118.74 € *Unit price with basic configuration Volume Discount	339.04 € *Unit price with basic configuration	112.06 € *Unit price with basic configuration Volume Discount	131.29 € *Unit price with basic configuration Volume Discount	188.08 € *Unit price with basic configuration Volume Discount	101.45 € *Unit price with basic configuration Volume Discount	245.50 € *Unit price with basic configuration Volume Discount	83.69 € *Unit price with basic configuration	84.73 € *Unit price with basic configuration	235.08 € *Unit price with basic configuration	125.12 € *Unit price with basic configuration	33.32 € *Unit price with basic configuration	30.41 € *Unit price with basic configuration	89.48 € *Unit price with basic configuration	88.71 € *Unit price with basic configuration Volume Discount	87.89 € *Unit price with basic configuration Volume Discount	86.67 € *Unit price with basic configuration	91.40 € *Unit price with basic configuration	95.68 € *Unit price with basic configuration Volume Discount	84.69 € *Unit price with basic configuration	239.02 € *Unit price with basic configuration	104.54 € *Unit price with basic configuration	91.00 € *Unit price with basic configuration	83.96 € *Unit price with basic configuration	84.50 € *Unit price with basic configuration
Min. Shipping Days	6 Days	Same day	6 Days	Same day	Same day	Same day	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	10 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications		Stock				Stock	MR General Steel 2 Flutes R (Regular)							TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes	High-Hardness Steel 2 Flutes	MR General Steel 2 Flutes S (Short)	MR General Steel 2 Flutes S (Short)
R Size(mm)	0.5 ～ 3	0.03 ～ 6	-	0.1 ～ 1.5	0.05 ～ 3	0.05 ～ 3	0.2 ～ 8	0.5 ～ 15	0.5 ～ 6	0.5 ～ 6	0.1 ～ 1	0.1 ～ 3	0.5 ～ 8	1 ～ 5	0.3 ～ 3	0.5 ～ 3	0.3 ～ 1	0.1 ～ 10	0.05 ～ 3	0.1 ～ 3	0.5 ～ 15	0.2 ～ 1	0.2 ～ 6	5	0.5 ～ 6	0.5 ～ 15	3 ～ 6	0.1 ～ 2	0.2 ～ 1.5	3 ～ 6	0.2 ～ 1.5	0.6	0.75 ～ 8	0.1 ～ 3	0.5 ～ 15	0.5 ～ 6	4	3 ～ 10	3 ～ 10	0.3 ～ 6	2 ～ 6	3 ～ 10	1 ～ 6	1 ～ 10	0.5 ～ 10
Type	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Spherical Ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball
work material	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[○]	High Hardness Steel: to HRC60[◎]	High Hardness Steel: to HRC60[○]
Blade length (ℓ)(mm)	1.5 ～ 10	0.06 ～ 22	7.5 ～ 9	0.15 ～ 2.5	0.07 ～ 6	0.08 ～ 4.8	1.5 ～ 30	2.5 ～ 55	1.5 ～ 18	0.7 ～ 8.1	0.15 ～ 1.2	0.15 ～ 3.6	2 ～ 15	1 ～ 5	0.6 ～ 6	0.8 ～ 4.8	0.5 ～ 1.2	0.4 ～ 25	0.07 ～ 6	0.2 ～ 6	1.5 ～ 45	0.3 ～ 1.4	0.4 ～ 12	15	1.5 ～ 18	1.5 ～ 45	12 ～ 22	0.16 ～ 3.2	0.8 ～ 8	4 ～ 7	0.3 ～ 1.8	3	1.5 ～ 24	0.2 ～ 6	2.5 ～ 55	1 ～ 12	8	12 ～ 38	6 ～ 20	0.6 ～ 22	8 ～ 22	12 ～ 38	2 ～ 12	5 ～ 38	1.5 ～ 30
Number of flutes(sheet)	3	2	4	2	2	2	2	2	3	2	2	2	2 ～ 4	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	3	3	3
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Other	TiAlN	TiAlN	For High Hardness (Silicon Group)	MRC	TiAlN	For High Hardness (Silicon Group)	TiAlN	Non-Coated	Non-Coated	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	MRC	MRC	TiAlN	TiAlN	-	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN
Overall Length (L)(mm)	60 ～ 80	50 ～ 110	-	35 ～ 50	45 ～ 120	45 ～ 120	50 ～ 140	50 ～ 180	60 ～ 220	60 ～ 110	52 ～ 53	52 ～ 70	75 ～ 150	50 ～ 90	40	70 ～ 110	50	50 ～ 150	50 ～ 110	45 ～ 120	80 ～ 230	50	50 ～ 110	100	50 ～ 120	50 ～ 200	120 ～ 160	50 ～ 100	40	90 ～ 110	45 ～ 50	50	50 ～ 140	50	70 ～ 280	50 ～ 80	60	90 ～ 160	90 ～ 160	60 ～ 160	200 ～ 250	140 ～ 250	70 ～ 160	50 ～ 160	60 ～ 200
Underneck length (ℓ1)(mm)	-	-	24 ～ 36	0.5 ～ 20	0.3 ～ 50	0.3 ～ 60	-	-	6 ～ 160.8	5 ～ 60	0.3 ～ 5	0.3 ～ 18	20 ～ 61	5 ～ 10	-	20 ～ 50	1.5 ～ 5	-	0.2 ～ 60	-	10 ～ 100	1.2 ～ 5.5	0.6 ～ 7.5	-	-	3 ～ 80	-	1 ～ 30	-	20	1.2 ～ 6	-	3 ～ 8	1.1 ～ 9	-	2.5 ～ 30	16	-	-	10 ～ 80	100 ～ 140	-	20 ～ 85	-	-
Shank diameter (d)(mm)	6	4 ～ 12	-	4	4 ～ 6	3 ～ 6	4 ～ 16	4 ～ 25	6 ～ 20	6 ～ 12	4	-	6 ～ 16	6 ～ 10	6	4 ～ 8	4	4 ～ 20	4 ～ 6	4 ～ 6	4 ～ 32	4 ～ 6	4 ～ 12	10	4 ～ 12	4 ～ 32	5 ～ 11	6	3	6 ～ 12	4 ～ 6	4	4 ～ 16	6	3 ～ 25	6 ～ 12	8	6 ～ 20	6 ～ 20	6 ～ 16	10 ～ 16	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 20
R Precision(μm)	0.01～-0.01	-0.007～0.007 ～ -0.002～0.002	±8	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	-0.005～0.005 ～ -0.002～0.002	±0.005 ～ ±0.01	-0.01～+0.01	-	-	0.005～-0.005 ～ 3 to -3	3 to -3 ～ 5 to -5	-	±0.01	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.005	±0.005 ～ ±0.01	±0.005	-	0～-0.04 ～ 0～-0.03	-	-	-0.01～+0.01	-0.003～+0.003	0～-0.04 ～ 0～-0.03	-0.01～+0.01	-0.005～+0.005	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005	-0.01～+0.01	-0.01～+0.01 ～ -0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.015～+0.015 ～ -0.01	-0.003～+0.003	-0.01～+0.01	-0.01～+0.01	-0.01～0.01	-0.01～0.01	-0.015～+0.015	-0.015～+0.015	-0.015～+0.015	-0.01～+0.01
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

R 4.0

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.5
  - 17.9
- 18
- 19
- 20
- 21～21.5
  - 21
  - 21.5
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 27
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

49

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

155

160

170

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.8
  - 7
  - 7.5
  - 7.8
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25～25.6
  - 25
  - 25.6
- 26～26.8
  - 26
  - 26.8
- 27～27.6
  - 27
  - 27.6
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.6
  - 31
  - 31.5
  - 31.6
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36～36.1
  - 36
  - 36.1
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.7
  - 44
  - 44.2
  - 44.7
- 45～45.2
  - 45
  - 45.2
- 46～46.7
  - 46
  - 46.5
  - 46.7
- 47.5
- 48～48.9
  - 48
  - 48.7
  - 48.9
- 49
- 50～50.7
  - 50
  - 50.7
- 52
- 54～54.5
  - 54
  - 54.5
- 57
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7

7.80

7.94

8

9

9.52

9.70

10

11

11.70

12

12.7

14

15

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.04

0～-0.03

0 ～−0.02

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear