Carbide Radius End Mills

• 

  Radius End Mills (Carbide) (142)

• 

  Long Neck Radius End Mills (Carbide) (46)

• 

  UNION TOOL

  HRRS, HM Coated 4-Flute Radius

  [Features]· Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool· The optimized corner radius size enables processing with larger feed than conventional· Seamless Corner Radius Shape· High hardness materials up to 65 HRC can also be machined

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 12	0.3 ～ 4	Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○]	2 ～ 12	4	Long-Neck Radius	70 ～ 120	3 ～ 12	6 ～ 36

  Precio (IVA no incluido) a partir de:

  76.38 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • DESCUENTO

  UNION TOOL

  HLRS 4-Flute Long-Neck Radius

  [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Rigidity-oriented blade shape provides long life even when machining high hardness materials· Capable of stable machining for both dry and wet type· New HARDMAX coating adopted to improve oxidation resistance.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  0.8 ～ 6	0.05 ～ 1	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○] / Copper[○]	0.48 ～ 4.8	4	Long-Neck Radius	50 ～ 120	4 ～ 6	2 ～ 48

  Precio (IVA no incluido) a partir de:

  55.58 €

  Precio especial

  Fecha de envío normal:

  Artículo en stock: 1 día laborable

  Algunos artículos se pueden enviar el mismo día

  Configurar
• 

  • DESCUENTO
  • Volume Discount
  • Stock

  NS TOOL

  MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels

  Superior surface finish with excellent chipping prevention and reduced chattering due to the use of MUGEN coating for hardened steels and a new shape

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  1 ～ 6	0.05 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.8 ～ 5	4	Long-Neck Radius	50 ～ 110	4 ～ 6	2 ～ 48

  Precio (IVA no incluido) a partir de:

  53.49 €

  Precio especial

  Fecha de envío normal:

  Artículo en stock: 1 día laborable

  Algunos artículos se pueden enviar el mismo día

  Configurar
• 

  UNION TOOL

  HRRS, HM Coated 4-Flute Short Shank Radius

  [Features]· Unique corner rounding creates larger cutting depth and pick feed than with a ball· The seamless corner radius shape reduces cutting resistance and chattering· High hardness materials up to 65 HRC can also be machined

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 12	0.3 ～ 4	Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○]	2 ～ 12	4	Long-Neck Radius	45 ～ 75	3 ～ 12	6 ～ 36

  Precio (IVA no incluido) a partir de:

  76.10 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount
  • XAL
  • General Steel
  • 4 Flutes

  MISUMI

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  4-Flute Radius for High-Efficiency and High-Speed Machining

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  4 ～ 12	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	18 ～ 38	4	Radius	60 ～ 100	6 ～ 12	-

  Precio (IVA no incluido) a partir de:

  23.73 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR

  High-precision bull nose (radius) end mill for shape machining of mold. Performs also high-speed cutting of hardened steel due to WXS coating with excellent heat resistance.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  0.4 ～ 4	0.05 ～ 0.5	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎]	0.3 ～ 4	2 ～ 4	Long-Neck Radius	50 ～ 70	4 ～ 6	1 ～ 20

  Precio (IVA no incluido) a partir de:

  72.80 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  OSG

  EPL-HP-4FL, Carbide end mill

  Carbide end mill - For general applications - 4 flutes, variable helix and unequal spacing, corner radius - Weldon shank

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  -	-	-	-	-	-	-	-	-

  Precio (IVA no incluido) a partir de:

  42.20 €

  Fecha de envío normal:

  4 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  4 ～ 12	0.813 ～ 2.438	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 24	4	High-Feed Radius	80 ～ 160	6 ～ 12	35 ～ 108

  Precio (IVA no incluido) a partir de:

  96.97 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • XAL
  • General Steel
  • 2 Flutes

  MISUMI

  XAL series carbide radius end mill, 2-flute / short model

  Radius end mills are available at low prices

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  1 ～ 12	0.1 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	3 ～ 30	2	Radius	50 ～ 75	4 ～ 12	-

  Precio (IVA no incluido) a partir de:

  14.52 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / short model

  [Features] -Multi-function end mill with radius-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 20	0.2 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	5 ～ 38	4	Radius	60 ～ 110	6 ～ 20	18 ～ 73

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute / short model

  [Features] -Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  1 ～ 12	0.1 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	2 ～ 24	4	Radius	40 ～ 75	4 ～ 12	17 ～ 45

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • DLC
  • Aluminum
  • 2 Flutes
  • R (Regular)

  MISUMI

  DLC Coated Carbide Radius End Mill for Aluminium Machining, 2-Flute / Regular Model

  In addition to the standard products, the radius can be selected extensively for manufactured products

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 12	0.2 ～ 1	Aluminum[◎] / Copper[○] / Resin[○]	5 ～ 36	2	Radius	40 ～ 80	4 ～ 12	23 ～ 50

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • Non-Coated
  • Aluminum
  • 3 Flutes

  MISUMI

  Carbide Radius End Mill for Aluminium Machining, 3-Flute / Stub, Long Shank Model

  Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  5 ～ 22	0.5 ～ 2	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	9 ～ 33	3	Radius	80 ～ 200	4 ～ 20	-

  Precio (IVA no incluido) a partir de:

  109.63 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • DIA
  • Graphite
  • 4 Flutes
  • Long

  MISUMI

  Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

  The diamond coated radius shape that's ideal for shaping graphite

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  6 ～ 12	0.5 ～ 3	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	30 ～ 60	4	Radius	150 ～ 200	6 ～ 12	60 ～ 85

  Precio (IVA no incluido) a partir de:

  166.75 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Non-Coated
  • General Steel

  MISUMI

  Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

  [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  1 ～ 20	0.1 ～ 3	General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 60	2 ～ 4	Radius	40 ～ 125	4 ～ 20	-

  Fecha de envío normal:

  7 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS

  Suppressing chatter due to the effect of evolutionary "unequal lead".

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 10	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6 ～ 20	4	Radius	50 ～ 70	6 ～ 10	-

  Precio (IVA no incluido) a partir de:

  109.70 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  UNION TOOL

  HLRS2000 HM Coated 2 Flute Long-Neck Radius

  [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  0.4 ～ 6	0.05 ～ 1	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	0.4 ～ 6	2	Long-Neck Radius	50 ～ 120	4 ～ 6	1 ～ 60

  Precio (IVA no incluido) a partir de:

  43.45 €

  Precio especial

  Fecha de envío normal:

  Artículo en stock: 1 día laborable

  Algunos artículos se pueden enviar el mismo día

  Configurar
• 

  NS TOOL

  SSR200 CBN Super Speed Radius End Mill

  Achieves high-efficiency machining of corner radius due to outstanding CBN durability

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  0.2 ～ 2	0.02 ～ 0.5	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.08 ～ 1.2	2	Radius	48 ～ 53	4	0.5 ～ 10

  Precio (IVA no incluido) a partir de:

  126.93 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  NS TOOL

  Power Radius End Mill MSXH440R

  Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 12	0.3 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	8 ～ 26	4	Radius	60 ～ 80	6 ～ 12	-

  Precio (IVA no incluido) a partir de:

  69.81 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  GUHRING

  Square End Mill, Regular, 4-Flute Corner R 3562

  [Features]· Ideal for corner rounding of molds and machine parts.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  6 ～ 20	-	-	-	4	Radius	57 ～ 104	6 ～ 20	-

  Precio (IVA no incluido) a partir de:

  84.67 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  SANDVIK

  CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

  [Features]· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  -	0.5 ～ 2	General Steel[○] / Cast Iron[○]	-	4	Radius	57 ～ 72	6 ～ 12	-

  Precio (IVA no incluido) a partir de:

  115.32 €

  Fecha de envío normal:

  8 días laborables

  Configurar
• 

  UNION TOOL

  DCLRS Diamond Coating 4-Flute Long Neck Radius

  [Features] · A 4-flute long neck radius end mill with diamond coating. Ideal for graphite electrode machining. · The unique diamond coating is ideal for graphite machining and provides excellent abrasion resistance. · Features a coating with excellent adhesive properties and an optimized blade shape, helping deliver a long service life.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  -	-	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	2 ～ 12	4	Long-Neck Radius	50 ～ 120	4 ～ 6	-

  Precio (IVA no incluido) a partir de:

  132.19 €

  Fecha de envío normal:

  7 días laborables

  Configurar
• 

  OSG

  EPL-HI-CR-EMS, Carbide end mill

  Carbide end mill - For general applications - 4 flutes, variable helix and unequal spacing, corner radius

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  -	-	-	-	-	-	-	-	-

  Precio (IVA no incluido) a partir de:

  46.60 €

  Fecha de envío normal:

  4 días laborables

  Configurar
• 

  OSG

  WXL-CR-EDS-6, Carbide end mill

  Carbide end mill - For general applications - 2 flutes, corner radius

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  -	-	-	-	-	-	-	-	-

  Precio (IVA no incluido) a partir de:

  59.60 €

  Fecha de envío normal:

  4 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  4 ～ 12	0.813 ～ 2.438	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 24	3	High-Feed Radius	50 ～ 100	6 ～ 12	-

  Precio (IVA no incluido) a partir de:

  122.52 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  4 ～ 20	0.813 ～ 2.607	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 40	4	High-Feed Radius	50 ～ 150	6 ～ 20	-

  Precio (IVA no incluido) a partir de:

  116.38 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

  [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  4 ～ 12	0.813 ～ 2.438	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 24	3	High-Feed Radius	80 ～ 160	6 ～ 12	35 ～ 108

  Precio (IVA no incluido) a partir de:

  93.37 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 4-flute / stub model

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 6	0.2 ～ 0.5	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	3 ～ 9	4	Radius	50	6	-

  Precio (IVA no incluido) a partir de:

  59.74 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • XAL
  • General Steel
  • 3 Flutes

  MISUMI

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 12	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	16 ～ 38	3	Radius	60 ～ 100	6 ～ 12	-

  Precio (IVA no incluido) a partir de:

  23.73 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • XAL
  • General Steel
  • 4 Flutes

  MISUMI

  XAL series carbide radius end mill, 4-flute / short model

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 20	0.1 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	8 ～ 38	4	Radius	50 ～ 100	4 ～ 20	-

  Precio (IVA no incluido) a partir de:

  18.89 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 12	0.5 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	2 ～ 12	3	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Precio (IVA no incluido) a partir de:

  87.94 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 12	0.5 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 24	3	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Precio (IVA no incluido) a partir de:

  83.28 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  [Features] -High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 12	0.75 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	1.2 ～ 5	4	High-Feed Radius	60 ～ 110	6 ～ 12	7.5 ～ 24

  Precio (IVA no incluido) a partir de:

  64.07 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-purpose for engraving, side face, rough and medium finishing-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 12	0.5 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	2 ～ 12	4	High-Feed Radius	50 ～ 100	4 ～ 12	-

  Precio (IVA no incluido) a partir de:

  56.61 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Variable design that can be used for engraving, side faces, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 20	0.5 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 40	4	High-Feed Radius	50 ～ 130	4 ～ 20	-

  Precio (IVA no incluido) a partir de:

  77.71 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  Long neck type with interference prevention can be selected from a number of effective lengths

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  4 ～ 16	1 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 24	4	Long-Neck Radius	70 ～ 180	4 ～ 16	-

  Precio (IVA no incluido) a partir de:

  81.35 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 12	0.3 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 18	3	Radius	40 ～ 65	6 ～ 12	-

  Precio (IVA no incluido) a partir de:

  76.51 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 12	0.3 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 18	4	Radius	40 ～ 65	6 ～ 12	-

  Precio (IVA no incluido) a partir de:

  82.35 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 12	0.5 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 18	3	Radius	60 ～ 100	6 ～ 12	14 ～ 68

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / short model

  [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 12	0.3 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	5 ～ 26	3	Radius	60 ～ 100	6 ～ 12	18 ～ 70

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 20	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	5 ～ 56	3	Radius	60 ～ 130	6 ～ 20	26 ～ 92

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

  [Features] -Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter-Long shank is ideal for milling deep cavities-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 22	0.2 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 30	4	Radius	80 ～ 200	6 ～ 20	10 ～ 18

  Precio (IVA no incluido) a partir de:

  76.72 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

  [Features] -Radius end mill-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 12	0.5 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	4.5 ～ 18	4	Radius	60 ～ 100	6 ～ 12	14 ～ 68

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  MISUMI

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  [Features] -Radius multi-function cutter-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  3 ～ 20	0.2 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	5 ～ 56	4	Radius	60 ～ 130	6 ～ 20	26 ～ 92

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  MISUMI

  TSC series carbide radius end mill, 2-flute stub model

  [Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.

  Más información

  Blade diameter (D) (φ)	R Size (mm)	work material	Blade length (ℓ) (mm)	Number of flutes (sheet)	Type	Overall Length (L) (mm)	Shank diameter (d) (mm)	Underneck length (ℓ1) (mm)
  2 ～ 12	0.2 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	3 ～ 18	2	Radius	35 ～ 60	4 ～ 12	-

  Precio (IVA no incluido) a partir de:

  34.89 €

  Fecha de envío normal:

  5 días laborables

  Configurar