Inserts (for Milling)（work material：Steel Page 3）

149

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 14 Days or Less

?* Information on days to ship and prices

CoroMill Tip

SANDVIK

Sharp cutting edge and high performance

Select to compare

Configure now
Starting from^∗ ：	33.10 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Milling Tip

SANDVIK

Unique material and shape using cutting edge technology to demonstrate high performance.

Select to compare

Configure now
Starting from^∗ ：	22.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tips for Phoenix Front Milling Octagon Type Bore Type

OSG

It is shaped to combine high rigidity and sharp cutting performance due to the negative cutting edge shape and positive clearance angle.

Select to compare

Configure now
Starting from^∗ ：	28.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tips for Phoenix Series Ball End Mills for Finishing

OSG

The high mounting accuracy of the body allows for a good machined surface and long tool life. Can be selected according to the application.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tips for Phoenix Series Radius End Mills for Finishing

OSG

It is an insert with high corner radius accuracy, fully profiled bottom edge and special treatment to improve cutting edge strength. Good machining accuracy can be achieved.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tips for Phoenix Series Round Cutters

OSG

An insert for OSG-PHENIX PCR. Can be adjusted according to the notch of the inserts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tips for Phoenix Series 4-Corner Shoulder Cutting Cutters

OSG

A positive square insert with 4 corners. A compact insert suitable for shallow depths of cut.

Select to compare

Configure now
Starting from^∗ ：	11.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tips for Phoenix Series Front Milling Square Type

OSG

The positive chipbreaker achieves high rigidity and reduced cutting force. Compatible with a wide range of machining operations from roughing to finishing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

PHC Tips for Phoenix Series High Feed Radius Cutters

OSG

Economical due to the use of 4 corners. Crusher shape emphasises sharpness while maintaining cutting rigidity.

Select to compare

Configure now
Starting from^∗ ：	13.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tips for Phoenix Series Front Milling Octagon Type

OSG

It is shaped to combine high rigidity and sharp cutting performance due to the negative cutting edge shape and positive clearance angle.

Select to compare

Configure now
Starting from^∗ ：	29.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

(Integrated) Insert for CoroMill 331 (Part Number List)

SANDVIK

A high-precision multi-purpose side milling cutter. [Features]·Diameter 40-315 mm· Shipped with the edge width tolerance preset to ±0.01 mm· Radial runout is ±0.02 mm.· Wide pocket· Strong clamping by wedge· Serration method· Adjustment range is 2-3 mm.· Unique spring-loaded mechanism for smooth adjustment and slip prevention

Select to compare

Configure now
Starting from^∗ ：	32.56 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Wiper Insert For CoroMill 345 - PW5, KW5PW8, KW8

SANDVIK

First choice for face milling machine with high productivity
8-corner inserts have achieved high cost-effective machining

Select to compare

Configure now
Starting from^∗ ：	37.80 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Insert For CoroMill 357 - 357R..M-PM / 357N..M-KH

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	88.06 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

8-Cutting-Edge Insert For CoroMill 331

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	45.50 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Grooving Insert For CoroMill 327 - Full R

SANDVIK

Wide range of sharp cutting edges for low cutting forces and high quality burr-free grooving, and shank lengths and diameters are available

Select to compare

Configure now
Starting from^∗ ：	90.51 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Chamfering Machining Insert For CoroMill 327

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	90.91 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Thread Milling Insert For CoroMill 327 (For Tapping), V-Shaped 60°

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	113.82 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Thread Milling Insert For CoroMill 327, Metric 60°

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	106.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insert For CoroMill 328, For Circlip Grooving

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	88.62 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insert For CoroMill 328 For Circlip Grooving With Chamfer

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	88.62 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Threading Insert for CoroMill 328

SANDVIK

For circlip grooving of holes with larger than 39 mm in diameter
Sharp cutting edge for precision grooves

Select to compare

Configure now
Starting from^∗ ：	115.17 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Peripheral Cutting Edge Insert For Long-Edge Cutter For Finishing

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	59.24 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Finishing Insert For Auto FS, SBENSBEXSBEX-11

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	47.39 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insert For CoroMill 210 - R210-E-M

SANDVIK

[Features]
Insert for CoroMill 210.
Carbide-coated insert.
Can be used for high feed machining.
For milling of high-hardness materials
For high-feed machining
For plunging

Select to compare

Configure now
Starting from^∗ ：	25.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Grooving Insert For CoroMill 327 - 327R-GMM

SANDVIK

[Features]
Insert for CoroMill 327.
A sharp blade tip for high-precision grooving.
Suitable for all types of work material.
For grooving with a milling cutter.

Select to compare

Configure now
Starting from^∗ ：	112.10 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Insert For CoroMill R216 Ball End Mill, R216-E-M

SANDVIK

[Features]
Allows for high cutting conditions
The same inserts are used for the center blade and peripheral cutting edge
For profiling
For molding
Ideal for everything from roughing right through to semi-finishing-type profiling

Select to compare

Configure now
Starting from^∗ ：	69.87 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insert For Milling SPMN

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	19.75 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Insert For Interchangeable-Blade-Type Face Milling Cutter CoroMill 345 - 345R

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	46.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Kyocera Turning Insert TN620 Cermet

KYOCERA

[Features]
· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.
· Achieves stable machining of steel and an excellent finished surface.
[Applications]
· For lathe turning
· TN620: The foremost recommended cermet for steel machining

Select to compare

Configure now
Starting from^∗ ：	14.22 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Kyocera Insert for Milling, Cermet TN100M

KYOCERA

[Features]
· TN100M: Tough cermet for milling.
· The oxidation resistance has improved, as has the thermal shock resistance, by a significant amount.
· Suppresses oxidation wear in high-speed milling of steel.
[Applications]
· For Milling
· TN100M: Cermet for steel and die steel high speed milling

Select to compare

Configure now
Starting from^∗ ：	8.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Kyocera Turning Insert PV720 PVD Cermet

KYOCERA

[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machining

Select to compare

Configure now
Starting from^∗ ：	17.57 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Sandvik Coro-Mill 327 Grooved, Full R Tip 1025

SANDVIK

[Features]
· CORO-MILL 327 tip.
· Sharp blade tip for high-precision grooves.
· Supports any kind of workpiece.
[Applications]
· For full radius groove machining with milling cutter.

Select to compare

Configure now
Starting from^∗ ：	90.51 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Swing Ball Eco SWE Type Compatible Tip

DIJET

[Applications]
· For Coarse Finishing / Shaping

Select to compare

Configure now
Starting from^∗ ：	21.96 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Mirror Radius Insert FRM Type

DIJET

"Mirror Radius RNM/MRN" insert for high-speed high-efficiency machining of molds, usable for medium finishing to finishing and also supports high hardness materials.
· [Features]
· Uses new material "DH102," a combination of "New DH (Dijet Hard) Coating" (a new PVD coating for hardened materials and high speed machining) and a micrograin ultra-hard alloy for hardened materials to attain long-life use. JC8015 material is available for general steel, etc.
· A positive blade shape is used, like the conventional HRM type, with low cutting resistance and favorable cutting quality.
· Tools can be consolidated by using 1 holder and changing the insert, handling from rough machining to finishing of any work material.

Select to compare

Configure now
Starting from^∗ ：	90.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Throw-Away Insert For End Mill CZH-140 / 141

NGK SPARK PLUG

Insert for indexable end mills.
Shape (initial letter of part number): others
Specifications: center blade
Compatible holder: REZ type
Wiper yes/no: with wiper

Select to compare

Configure now
Starting from^∗ ：	30.59 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Chamfering Mill M25 Series Insert SDMW

Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】

WIDIA

Chamfer mill, M25 Series, Insert, SDMW [10 Pcs. Included]
[Specifications]
Shape (initial letter of part number): S (square)
Relief angle: D (15°)
Work material: cast Iron / non-ferrous metals / heat resistant alloys, titanium alloys
Number of available corners: 4
Cutting edge length (mm): 9.53
Thickness (mm): 3.18
Grade: THM

Select to compare

Configure now
Starting from^∗ ：	16.76 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Insert For End Mills For Automatic Lathes MT-CP

THE CUT

[Dedicated Insert]
*5 inserts are contained in 1 case.
* The cutting conditions are for general guidance.
They are subject to change to the situation of the machine used, the rigidity of the chuck, cutting fluid, etc.
·Part number: MT-CP040102R-RH-CEM1
Supported work material: steel other than non-ferrous metal
·Part number: MT-CP040102R-SE-MK10
Supported work material: cast iron, non-ferrous metal
·Part number: MT-CP040102R-RH-VP20
Supported work material: steel and Rostfreier Stahl other than non-ferrous metal

Select to compare

Configure now
Starting from^∗ ：	18.33 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SANDVIK CoroMill 495 Insert for Milling

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	30.77 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroMill 357 Insert for Milling

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK CoroMill 328 Insert for Thread Milling

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK Auto AF Insert for Milling

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	34.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroMill 216 Insert for Milling

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	Quote

SANDVIK CoroMill 328 Insert for Groove Milling

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	81.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroMill 325 Carbide Blank

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	72.69 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK CoroMill 331 Insert for Side and Face Milling

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days


Brand
Product Series
Starting from^∗
Min. Shipping Days
Shape (initial letter of model number)
Clearance angle
work material
Available corners

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	SANDVIK	SANDVIK	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA	KYOCERA	KYOCERA	SANDVIK	DIJET	DIJET	NGK SPARK PLUG	WIDIA	THE CUT	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product Series	CoroMill Tip	Milling Tip	Tips for Phoenix Front Milling Octagon Type Bore Type	Tips for Phoenix Series Ball End Mills for Finishing	Tips for Phoenix Series Radius End Mills for Finishing	Tips for Phoenix Series Round Cutters	Tips for Phoenix Series 4-Corner Shoulder Cutting Cutters	Tips for Phoenix Series Front Milling Square Type	PHC Tips for Phoenix Series High Feed Radius Cutters	Tips for Phoenix Series Front Milling Octagon Type	(Integrated) Insert for CoroMill 331 (Part Number List)	Wiper Insert For CoroMill 345 - PW5, KW5PW8, KW8	Insert For CoroMill 357 - 357R..M-PM / 357N..M-KH	8-Cutting-Edge Insert For CoroMill 331	Grooving Insert For CoroMill 327 - Full R	Chamfering Machining Insert For CoroMill 327	Thread Milling Insert For CoroMill 327 (For Tapping), V-Shaped 60°	Thread Milling Insert For CoroMill 327, Metric 60°	Insert For CoroMill 328, For Circlip Grooving	Insert For CoroMill 328 For Circlip Grooving With Chamfer	Threading Insert for CoroMill 328	Peripheral Cutting Edge Insert For Long-Edge Cutter For Finishing	Finishing Insert For Auto FS, SBENSBEXSBEX-11	Insert For CoroMill 210 - R210-E-M	Grooving Insert For CoroMill 327 - 327R-GMM	Insert For CoroMill R216 Ball End Mill, R216-E-M	Insert For Milling SPMN	Insert For Interchangeable-Blade-Type Face Milling Cutter CoroMill 345 - 345R	Kyocera Turning Insert TN620 Cermet	Kyocera Insert for Milling, Cermet TN100M	Kyocera Turning Insert PV720 PVD Cermet	Sandvik Coro-Mill 327 Grooved, Full R Tip 1025	Swing Ball Eco SWE Type Compatible Tip	Mirror Radius Insert FRM Type	Throw-Away Insert For End Mill CZH-140 / 141	Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】	Insert For End Mills For Automatic Lathes MT-CP	SANDVIK CoroMill 495 Insert for Milling	SANDVIK CoroMill 357 Insert for Milling	SANDVIK CoroMill 328 Insert for Thread Milling	SANDVIK Auto AF Insert for Milling	SANDVIK CoroMill 216 Insert for Milling	SANDVIK CoroMill 328 Insert for Groove Milling	SANDVIK CoroMill 325 Carbide Blank	SANDVIK CoroMill 331 Insert for Side and Face Milling
Starting from^∗	33.10 € *Unit price with basic configuration	22.58 € *Unit price with basic configuration	28.00 € *Unit price with basic configuration	45.20 € *Unit price with basic configuration Volume Discount	35.00 € *Unit price with basic configuration Volume Discount	12.80 € *Unit price with basic configuration Volume Discount	11.60 € *Unit price with basic configuration	28.50 € *Unit price with basic configuration Volume Discount	13.30 € *Unit price with basic configuration	29.60 € *Unit price with basic configuration	32.56 € *Unit price with basic configuration	37.80 € *Unit price with basic configuration	88.06 € *Unit price with basic configuration	45.50 € *Unit price with basic configuration	90.51 € *Unit price with basic configuration	90.91 € *Unit price with basic configuration	113.82 € *Unit price with basic configuration	106.45 € *Unit price with basic configuration	88.62 € *Unit price with basic configuration	88.62 € *Unit price with basic configuration	115.17 € *Unit price with basic configuration	59.24 € *Unit price with basic configuration	47.39 € *Unit price with basic configuration	25.40 € *Unit price with basic configuration	112.10 € *Unit price with basic configuration	69.87 € *Unit price with basic configuration	19.75 € *Unit price with basic configuration	46.42 € *Unit price with basic configuration	14.22 € *Unit price with basic configuration	8.68 € *Unit price with basic configuration	17.57 € *Unit price with basic configuration	90.51 € *Unit price with basic configuration	21.96 € *Unit price with basic configuration	90.48 € *Unit price with basic configuration	30.59 € *Unit price with basic configuration	16.76 € *Unit price with basic configuration	18.33 € *Unit price with basic configuration	30.77 € *Unit price with basic configuration	-	-	34.88 € *Unit price with basic configuration	-	81.38 € *Unit price with basic configuration	72.69 € *Unit price with basic configuration	-
Min. Shipping Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	8 Days	6 Days	8 Days	8 Days	8 Days	8 Days	6 Days	6 Days	6 Days	8 Days	8 Days	6 Days	6 Days	8 Days	6 Days	8 Days	6 Days	9 Days	6 Days	9 Days	8 Days	8 Days	6 Days	8 Days	8 Days	8 Days	5 Days	5 Days	5 Days	5 Days	Quote	5 Days	5 Days	5 Days
Shape (initial letter of model number)	P (Regular pentagon)	S (Square)	O (Regular octagon)	Other	Other	R (Circular)	S (Square)	S (Square)	S (Square)	Other	Other	Other	P (Regular pentagon)	S (Square)	Other	Other	Other	Other	T (Equilateral Triangle Type)	T (Equilateral Triangle Type)	T (Equilateral Triangle Type)	Other	S (Square)	S (Square)	Other	Other	L (Rectangular)	S (Square)	-	-	-	Other	-	Other	Other	S (Square)	Other	-	-	-	-	-	-	-	-
Clearance angle	N (0°)	P (11°)	Other	-	-	P (11°)	D (15°)	N (0°)	D (15°) / Other	Other	N (0°)	N (0°)	N (0°)	N (0°)	Other	Other	Other	Other	N (0°)	N (0°)	Other	E (20°)	Other	C (7°)	Other	Other	P (11°)	N (0°)	-	-	-	Other	-	Other	-	D (15°)	-	Other	N (0°)	-	Other	P (11°)	-	-	N (0°)
work material	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel
Available corners	5	4	-	-	-	8	-	-	-	-	2	5	5	4	3	3	3 / 6	3	3	3	3	1	4	4	6	2	4	4	-	-	-	3	-	-	-	4	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Shape (initial letter of model number)
- O (Regular octagon)
- P (Regular pentagon)
- S (Square)
- T (Equilateral Triangle Type)
- C (80° Diamond-Shape)
- E (75°Diamond Shape)
- A (85° parallelogram)
- B (82° Parallelogram)
- L (Rectangular)
- W (Hexagonal Type)
- R (Circular)
- Other
Clear