¡Estamos traduciendo nuestra tienda online al español!
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.
Holding Tools for O.D. Tuning
215 artículos
* Información sobre días de envío, gastos de envío y precios
SANDVIK
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) V (35° Diamond-Shaped) Outer Diameter / Profiling Clamp-on Right-hand - 12 ～ 16 12 ～ 16 ConfigurarPrecio (IVA no incluido) a partir de:212.51 €Fecha de envío normal:6 días laborables
SANDVIK
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) - - - Right-hand / Left-hand - 50 47 ConfigurarPrecio (IVA no incluido) a partir de:580.42 €Fecha de envío normal:6 días laborables
KYOCERA
SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder
[Features] -This is the SDJC-FF type[Features] -For small tools, general turning holders, machining outside diameters and profiling.Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) D (55° Diamond-Shape) Outer Diameter / Profiling Screw-on Left-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:92.14 €Fecha de envío normal:10 días laborables
SANDVIK
T-Max S Shank Tool Bit For Turning, CTFPR / L
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) End Face Clamp-on Right-hand / Left-hand - 12 ～ 20 12 ～ 20 ConfigurarPrecio (IVA no incluido) a partir de:154.28 €Fecha de envío normal:6 días laborables
SANDVIK
Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) V (35° Diamond-Shaped) Outer Diameter / Profiling / Chamfer Clamp-on Right-hand / Left-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:806.06 €Fecha de envío normal:6 días laborables
SANDVIK
SANDVIK CoroTurn 300 Cutting Unit for Turning
[Specifications]・Type: Capto Cutting Unit・Cutting Direction: Right-hand, Left-hand, No-hand・No coolant・eClass-5.1: 21010903The clamp combined with the insert seat makes the insert self-locking.Effective and high-quality turning.[Features]・Geometries –L4 and -M5 are designed for excellent chip breaking within their respective application areas・Inserts in steel grades GC4425 and GC4415 with second generation Inveio technology for high wear resistance and long tool life・Stable iLock insert clamping and tight tolerances ensure high accuracy and indexing repeatability (within ±0.05 mm (±.002 inch))・The shim functions to maintain distance between the insert and tool holder, protecting the tool holderMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) - - - Right-hand / Left-hand / No-hand - - - ConfigurarPrecio (IVA no incluido) a partir de:524.69 €Fecha de envío normal:5 días laborables
SANDVIK
T-Max S Shank Tool Bit For Turning, CTTPR / L
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) Outer Diameter Clamp-on Right-hand - 25 25 ConfigurarPrecio (IVA no incluido) a partir de:182.24 €Fecha de envío normal:6 días laborables
SANDVIK
CoroTurn RC Double Clamp, DSSNR / L
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) S (Rectangular) Outer Diameter / End Face / Chamfer Cable clamp Right-hand / Left-hand Negative 20 ～ 40 20 ～ 40 ConfigurarPrecio (IVA no incluido) a partir de:154.28 €Fecha de envío normal:6 días laborables
SANDVIK
Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) D (55° Diamond-Shape) Outer Diameter / End Face / Chamfer Lever lock Right-hand / Left-hand - - - ConfigurarPrecio (IVA no incluido) a partir de:953.00 €Fecha de envío normal:6 días laborables
SANDVIK
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR / L-S
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) C (80° Diamond-Shape) Outer Diameter / End Face / Chamfer Clamp-on Right-hand / Left-hand Pozidriv 8 ～ 16 8 ～ 16 ConfigurarPrecio (IVA no incluido) a partir de:150.80 €Fecha de envío normal:6 días laborables
SANDVIK
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CCBNR / L -4
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) C (80° Diamond-Shape) Outer Diameter Clamp-on Right-hand / Left-hand - 25 ～ 32 25 ConfigurarPrecio (IVA no incluido) a partir de:247.42 €Fecha de envío normal:6 días laborables
SANDVIK
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR / L -4
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) D (55° Diamond-Shape) Outer Diameter / Profiling / Chamfer Clamp-on Right-hand / Left-hand - 25 ～ 32 25 ～ 32 ConfigurarPrecio (IVA no incluido) a partir de:247.42 €Fecha de envío normal:6 días laborables
SANDVIK
Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR / L
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) S (Rectangular) Outer Diameter Pin Lock Right-hand / Left-hand Negative - - ConfigurarPrecio (IVA no incluido) a partir de:395.30 €Fecha de envío normal:6 días laborables
SANDVIK
Sandvik CoroTurn 107, Screw Clamp, SVHBR/L
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) V (35° Diamond-Shaped) Outer Diameter / Profiling / Chamfer Clamp-on Right-hand / Left-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:429.06 €Fecha de envío normal:6 días laborables
SANDVIK
Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto T-Max P- Lever Clamp, PRSCR / L
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) R (Circular) Outer Diameter Lever lock Right-hand / Left-hand - - - ConfigurarPrecio (IVA no incluido) a partir de:454.69 €Fecha de envío normal:6 días laborables
SANDVIK
Multi-Function Tool CoroPlex TT Twin Tool, CoroTurn RC Double Clamp, C-T-DCL / M
Applicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) C (80° Diamond-Shape) / Other Outer Diameter / End Face / Profiling / Chamfer Cable clamp Left-hand - - - ConfigurarPrecio (IVA no incluido) a partir de:1,022.86 €Fecha de envío normal:6 días laborables
SANDVIK
SANDVIK CoroPlex TB Multifunctional Tool for Turning
[Specifications]・Type: Cutting head・Cutting Direction: No-hand・eClass-5.1: 21010903[Features]・Quick change and modularity with Coromant Capto・Modularity with SL couplings・High Pressure Coolant・Two inserts in the same tool・Increased number of tool positionsMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) - - - No-hand - - - ConfigurarPrecio (IVA no incluido) a partir de:1,198.46 €Fecha de envío normal:5 días laborables
SANDVIK
SANDVIK CoroPlex TT Multifunctional Tool for Turning
[Specifications]・Type: Cutting head・Cutting Direction: Left-hand・eClass-5.1: 21010903[Features]・Flexible tool holders optimized in length, stability・Coolant solution for multi-task machines・Quick change and modularity with Coromant Capto・CoroTurn RC insert clamping system with wide flexibilityMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) - - - Left-hand - - - ConfigurarPrecio (IVA no incluido) a partir de:1,007.00 €Fecha de envío normal:5 días laborables
SANDVIK
SANDVIK Coromant Capto Miniturret for Three Rectangular Shank Tools
[Specifications]・Type: Miniature turret・Cutting Direction: Right-hand, Left-hand・eClass-5.1: 21010903Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) - - - Right-hand / Left-hand - - - ConfigurarPrecio (IVA no incluido) a partir de:1,689.54 €Fecha de envío normal:5 días laborables
SANDVIK
SANDVIK T-Max Shank Tool for Turning
[Specifications]・Type: Shank tool・Cutting Direction: Right-hand, Left-hand, No-hand・No coolant・eClass-5.1: 21010903Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) - - - Right-hand / Left-hand / No-hand - 25 ～ 50 25 ～ 40 ConfigurarPrecio (IVA no incluido) a partir de:244.08 €Fecha de envío normal:5 días laborables
KYOCERA
DCLN Type (Outer Diameter Machining / End Machining)
[Features] Machining applications: Outside diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert clearance angle: negative 0° (N); clamping method: double clamping (D).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) C (80° Diamond-Shape) Outer Diameter / End Face Cable clamp Right-hand / Left-hand Negative 20 ～ 25 20 ～ 25 ConfigurarPrecio (IVA no incluido) a partir de:113.60 €Fecha de envío normal:6 días laborables
KYOCERA
PCLN Type (External Diameter / End-Face Machining)
[Features] Machining applications: Outside diameter and flange; compatible insert shape: C (80° two-bolt); relief angle: negative 0° (N); clamping method: pin lock (P), non-ISO standard.Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) C (80° Diamond-Shape) Outer Diameter / End Face Lever lock Right-hand / Left-hand Negative 25 ～ 32 25 ～ 32 ConfigurarPrecio (IVA no incluido) a partir de:116.64 €Fecha de envío normal:6 días laborables
KYOCERA
DDJN Type (Outer Diameter Machining / Profiling)
[Features] Machining applications: Outside diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: negative 0° (N); clamping method: double clamping (D).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) D (55° Diamond-Shape) Outer Diameter / End Face Cable clamp Right-hand Negative - - ConfigurarPrecio (IVA no incluido) a partir de:110.32 €Fecha de envío normal:6 días laborables
KYOCERA
PDJN Type (External Diameter, Profiling)
[Features] Machining applications: Outside diameter and profiling; compatible insert shape: D (55° two-bolt); relief angle: negative 0° (N); clamping method: pin lock (P), non-ISO standard.Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) D (55° Diamond-Shape) Outer Diameter / Profiling Lever lock Left-hand Negative 20 20 ConfigurarPrecio (IVA no incluido) a partir de:107.55 €Fecha de envío normal:10 días laborables
- Volume Discount
KYOCERA
PSBN Type (Outer Diameter Machining)
[Features] Machining applications: Outside diameter; compatible insert shape: S (square); clearance angle: negative 0° (N); clamping method: pin locking (P), non-ISO standard.Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) S (Rectangular) Outer Diameter Lever lock Right-hand Negative - - ConfigurarPrecio (IVA no incluido) a partir de:104.26 €Fecha de envío normal:6 días laborables
KYOCERA
DTGN Type (Outer Diameter Machining)
[Features] Machining applications: Outside diameter; compatible insert shape: T (triangle); compatible clearance angle: negative 0° (N); clamping method: double clamping (D).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) Outer Diameter Cable clamp Left-hand Negative - - ConfigurarPrecio (IVA no incluido) a partir de:113.60 €Fecha de envío normal:6 días laborables
KYOCERA
PTGN Type (Outer Diameter Machining)
[Features] Machining applications: Outside diameter; compatible insert shape: T (triangle); clearance angle: negative 0° (N); clamping method: pin locking (P), non-ISO standard.Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) Outer Diameter Lever lock Left-hand Negative 25 25 ConfigurarPrecio (IVA no incluido) a partir de:116.64 €Fecha de envío normal:10 días laborables
KYOCERA
PTFN Type (End Face Machining)
[Features] Machining applications: Flange; compatible insert shape: T (triangle); compatible clearance angle: negative 0° (N); clamping method: pin lock (P).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) End Face Lever lock Right-hand Negative 20 20 ConfigurarPrecio (IVA no incluido) a partir de:107.55 €Fecha de envío normal:6 días laborables
KYOCERA
WTJN-N Type (Outer Diameter, Profile Machining)
[Features] Machining applications: Outside diameter and profiling; compatible insert shape: T (triangle); compatible clearance angle: negative 0 (N); clamping method: non-ISO standard.Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) Outer Diameter / Profiling Wedge Lock Right-hand Negative - - ConfigurarPrecio (IVA no incluido) a partir de:126.52 €Fecha de envío normal:6 días laborables
KYOCERA
PRGC / PRXC / PRGN Types (External Diameter, End Face, Profiling)
[Features] Machining applications: Outside diameter, flange and profiling; compatible insert shape: R (round); compatible insert clearance angle: positive 7 (C), negative 0° (N); clamping method: pin lock (P), non-ISO standard.Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) R (Circular) Outer Diameter / End Face / Profiling Lever lock Right-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:146.46 €Fecha de envío normal:6 días laborables
KYOCERA
CCLN Type (Outer Diameter Machining / End Machining)
[Features] Machining applications: Outer diameter and flange; compatible insert shape: C (80° with two screws); compatible insert clearance angle: negative 0° (N); clamping method: clamp-on (C).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) C (80° Diamond-Shape) Outer Diameter / End Face Clamp-on Right-hand Negative - - ConfigurarPrecio (IVA no incluido) a partir de:126.89 €Fecha de envío normal:6 días laborables
KYOCERA
SABS-40F Type (Cutting Edge Width 2.8 mm, Depth 4 mm Max.)
Back surface clamping type / screw clamping type back turning (outer diameter) holder.Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) Other Post-Grinding Other Right-hand - - - ConfigurarPrecio (IVA no incluido) a partir de:116.89 €Fecha de envío normal:6 días laborables
KYOCERA
SCLC Type (External Diameter / End-Face Machining)
[Features] Machining applications: Outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) C (80° Diamond-Shape) Outer Diameter / End Face Screw-on Right-hand / Left-hand Pozidriv 12 ～ 20 12 ～ 20 ConfigurarPrecio (IVA no incluido) a partir de:99.47 €Fecha de envío normal:6 días laborables
KYOCERA
SDJC Type (External Diameter, Profiling) Holder
[Features] Machining applications: Outside diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert clearance angle: positive 7° (C); clamping method: screw on (S).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) D (55° Diamond-Shape) Outer Diameter / Profiling Screw-on Right-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:92.14 €Fecha de envío normal:10 días laborables
KYOCERA
SDXC Type (External Diameter, End Face, Profiling)
[Features] Machining applications: Outer diameter, flange and profiling; compatible insert shape: D (55° with two bolts); compatible insert relief angle: positive 7° (C); clamping method: screw-on (S).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) D (55° Diamond-Shape) Outer Diameter / Profiling Screw-on Right-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:95.42 €Fecha de envío normal:6 días laborables
KYOCERA
STGC (P) Type (Outside Diameter Machining)
[Features] Machining applications: Outside diameter; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 7° (C); clamping method: screw-on (S).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) Outer Diameter Screw-on Right-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:97.18 €Fecha de envío normal:6 días laborables
KYOCERA
SVPB Type (Outer Diameter, End Surface, Profile, Relief Machining)
[Features] Machining applications: Outer diameter, flange and profiling; compatible insert shape: V (35° with two bolts); compatible insert clearance angle: positive 5° (B); clamping method: screw-on (S).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) V (35° Diamond-Shaped) Outer Diameter / End Face / Profiling Screw-on Left-hand Pozidriv 20 ～ 25 20 ～ 25 ConfigurarPrecio (IVA no incluido) a partir de:124.73 €Fecha de envío normal:6 días laborables
KYOCERA
SVVB Type (Outer Diameter, Profile Machining)
[Features] Machining applications: Outside diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamping method: screw-on (S).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) V (35° Diamond-Shaped) Outer Diameter / Profiling Screw-on No-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:122.47 €Fecha de envío normal:8 días laborables
KYOCERA
SVJP-FF Type (Not Offset) (Outer Diameter, Profile Machining)
[Features] Machining applications: Outside diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamping method: screw-on (S).Más informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) V (35° Diamond-Shaped) Outer Diameter / Profiling Screw-on Left-hand Pozidriv - - ConfigurarPrecio (IVA no incluido) a partir de:110.72 €Fecha de envío normal:6 días laborables
SANDVIK
QS Holding System Stepping CoroTurn 107 Bit
Unique shape exhibits high performanceMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) Outer Diameter Clamp-on Right-hand - 16 16 ConfigurarPrecio (IVA no incluido) a partir de:396.47 €Fecha de envío normal:8 días laborables
SANDVIK
Unique shape exhibits high performanceMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) Other Outer Diameter / End Face / Profiling / Chamfer Clamp-on Right-hand Negative 40 25 ConfigurarPrecio (IVA no incluido) a partir de:335.93 €Fecha de envío normal:6 días laborables
SANDVIK
T-Max P Negative Shank Bit for O.D.
Tool for turning outside diameters enabling high productivity, high efficiency and high machining qualityMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) T (Triangle) Outer Diameter / Profiling Wedge Lock Left-hand Negative 32 32 ConfigurarPrecio (IVA no incluido) a partir de:197.47 €Fecha de envío normal:6 días laborables
SANDVIK
T-Max Shank Bit for Ceramic Tips
Unique shape exhibits high performanceMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) R (Circular) Outer Diameter / Profiling / Post-Grinding Clamp-on Right-hand / Left-hand - 32 36 ConfigurarPrecio (IVA no incluido) a partir de:314.97 €Fecha de envío normal:8 días laborables
SANDVIK
CORO-TURN RC, Shank Bit for Ceramic Tips
Unique shape exhibits high performanceMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) D (55° Diamond-Shape) Outer Diameter / Profiling / Chamfer Cable clamp Left-hand - 32 32 ConfigurarPrecio (IVA no incluido) a partir de:304.48 €Fecha de envío normal:6 días laborables
SANDVIK
CORO-TURN RC, Shank Bit for Negative Tips
Unique shape exhibits high performanceMás informaciónApplicable Tip Shape Application Clamp Shape Cutting Direction Applicable Tip Clearance Angle Type Shank height (mm) Shank width (mm) C (80° Diamond-Shape) Outer Diameter / End Face / Chamfer Cable clamp Right-hand / Left-hand Negative 20 ～ 32 20 ～ 32 ConfigurarPrecio (IVA no incluido) a partir de:150.12 €Fecha de envío normal:6 días laborables