Grooving / Cutting Off Holders

221

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 14 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

KYOCERA

Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

Select to compare

Configure now
Starting from^∗ ：	19.09 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Punching Blade KTKB-S Type

KYOCERA

P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

Select to compare

Configure now
Starting from^∗ ：	113.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lathe Turning / Cutting Holder KGD Model (Combination)

KYOCERA

If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

Select to compare

Configure now
Starting from^∗ ：	125.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK Hydraulic Clamping Unit

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	3,798.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Driven Tool Holder for BMT-P Turrets

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing ends 30/11/2024

Lathe Turning (Cutter) Bit GDM Model

KYOCERA

Conventional insert mounting to new holders is not recommended.

Select to compare

Configure now
Starting from^∗ ：	15.30 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Grooved End Face Blade KGDF Type

KYOCERA

[Features] Machining applications: Flanges, blind holes; compatible insert shape: non-ISO standard; clamping method: non-ISO standard.

Select to compare

Configure now
Starting from^∗ ：	116.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK BMT Turret Interface to Blade Adaptor

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)

KYOCERA

Select to compare

Configure now
Starting from^∗ ：	19.72 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Slit Tip GDM Type

KYOCERA

When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

Select to compare

Configure now
Starting from^∗ ：	19.72 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

T-Max Q-Cut Plunging / Grooving Shank Bit

SANDVIK

A parting and grooving tool that improves part production capacity through high productivity and long tool life.

Select to compare

Configure now
Starting from^∗ ：	190.68 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SANDVIK Driven Tool Holder for Okuma Machines

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK VDI to Coromant Capto Clamping Unit

SANDVIK

[Specifications]
・Type: Clamping unit, Manually operated clamping unit, VDI basic holder
・Cutting Direction: Right-hand, Left-hand, No-hand
・eClass-5.1: 21021103

Quick change clamping units will optimize the machine utilization by reducing both set-up time and tool change time significantly

Select to compare

Configure now
Starting from^∗ ：	966.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Manual Clamping Unit

SANDVIK

[Specifications]
・Type: Clamping unit, Manually operated clamping unit
・Cutting Direction: Right-hand, Left-hand
・eClass-5.1: 21021103, 21021105

[Features]
・High torque transmission
・High bending strength
・Quick change and automated tool change
・Advanced nozzle technology for process security even at low pressures
・Through-tool delivery of high-pressure coolant, from machine to cutting edge
・Balanced and concentric
・Self-centering

Select to compare

Configure now
Min. Shipping Days ：	5 Days

SANDVIK Coromant Capto to Rectangular Shank Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	578.77 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

KGDS-S Type Blade for Grooving / Plunging

KYOCERA

[Features] Machining applications: Grooving / parting off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

Select to compare

Configure now
Starting from^∗ ：	115.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

KYOCERA

If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.

Select to compare

Configure now
Starting from^∗ ：	127.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Cutter Holder TKN Type

KYOCERA

P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

Select to compare

Configure now
Starting from^∗ ：	13.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Kyocera Mill Routing Tip Holder

KYOCERA

[Features]
· KGD-S type: Realizes high efficiency machining thanks to the excellent chip discharge performance and high rigidity holder.
[Applications]
· Holder for Grooving and Cutting Off

Select to compare

Configure now
Starting from^∗ ：	155.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK T-Max Q-Cut Blade for Parting

SANDVIK

[Specifications]
・Type: Blade insert, Cutting blade
・External or internal machining: External machining
・Cutting Direction: No-hand
・Bracket Clamping technology: Spring tension system
・eClass-5.1: 21011812

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Lathe Turning / Cutting (Multi-Function) Bit GMM Model

KYOCERA

Machinable groove depth is limited depending on workpiece diameter.

Select to compare

Configure now
Starting from^∗ ：	16.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Functional / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Sliding Grooving Holder KIGM-8 Type (Blade Width 8 mm Tip Use / Large Inner Diameter Deep Grooving)

KYOCERA

Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

Select to compare

Configure now
Starting from^∗ ：	476.05 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type

KYOCERA

[Features] Compatible insert type: Non-ISO standard; Clamping method: Non-ISO standard; Clamping method: Non-ISO standard.

Select to compare

Configure now
Starting from^∗ ：	218.99 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Holder For Grooving SCRUM DUO (Shank: 10 to 16) GTWPR / L-1

NGK SPARK PLUG

[Features]
· Attained excellent stability and long life for grooving and side-turning
· Excellent chip processing and glossy groove bottom surface in side-turning
· Favorable chip processing and beautiful groove bottom surface in grooving
· For automatic lathe

Select to compare

Configure now
Starting from^∗ ：	172.47 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

SANDVIK Driven Tool Holder for Gildemeister Machines

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	7,220.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Lathe Turning / Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)

KYOCERA

[Features] Machining applications: Grooving / parting off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

Select to compare

Configure now
Starting from^∗ ：	126.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

KGDF Type End Face Grooving GDFM / GDFMS Types

KYOCERA

Use a DM breaker for deep grooves when cutting chip processing is not stable during grooving with a general purpose GM breaker.

Select to compare

Configure now
Starting from^∗ ：	11.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tool Block for Holding Blade, KTKTB Type (Split Type)

KYOCERA

[Features]
A split tool block to hold a Kyocera blade.
[Features]
For fixing blades.

Select to compare

Configure now
Starting from^∗ ：	247.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

T-Max Q-Cut Plunging / Grooving Cutting Head Type 570

SANDVIK

Unique shape exhibits high performance

Select to compare

Configure now
Starting from^∗ ：	480.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroCut 1 / 2 Plunging / Grooving Boring Bit

SANDVIK

Unique shape exhibits high performance

Select to compare

Configure now
Starting from^∗ ：	497.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroCut 1 / 2 Plunging / Grooving Shank Bit

SANDVIK

Unique shape exhibits high performance

Select to compare

Configure now
Starting from^∗ ：	190.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroCut, Q Cut, Blade / Adapter

SANDVIK

Unique shape exhibits high performance

Select to compare

Configure now
Starting from^∗ ：	232.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	251.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroTurn SL T-Max Q-Cut SL Blade For Grooving And Cut-Off 570-R / L151.21

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	176.78 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK Mazak Turret Interface to Blade Adaptor

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	1,632.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK T-Max Q-Cut Tool Block for Blades

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	375.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SANDVIK Driven Tool Holder for Mori Seiki Machines

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Outer Diameter Shallow Groove Holder KGBA Type

KYOCERA

[Features] This is a lever lock type holder that can be used for shallow recesses on outer diameters.

Select to compare

Configure now
Starting from^∗ ：	118.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type

KYOCERA

One clamp for shallow grooving with outer diameter.
[shank material]Steel

Select to compare

Configure now
Starting from^∗ ：	104.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Lathe Turning (Cutter) Bit GDG Model

KYOCERA

Conventional insert mounting to new holders is not recommended.

Select to compare

Configure now
Starting from^∗ ：	22.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Lathe Turning (Cutter) Holder KGD Model (for Combination / Automatic Type)

KYOCERA

If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

Select to compare

Configure now
Starting from^∗ ：	119.59 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving and End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

KYOCERA

A holder for the multifunctional tool "TAKINOL" series.
For grooving outside diameters with undercut.

Select to compare

Configure now
Starting from^∗ ：	158.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip

KYOCERA

[Features] It uses carbide and cermet materials, and some are CVD and PVD coated.

Select to compare

Configure now
Starting from^∗ ：	18.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

KYOCERA

[Features] Machining applications: Grooving; Holder angle (°): 90; Lubrication hole (oil hole): yes; Screw clamp allows good chip evacuation.

Select to compare

Configure now
Starting from^∗ ：	144.07 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve

KYOCERA

[Features] No cutting direction; Lubrication hole (oil hole): yes; Compatible sleeve: It can be used in combination with a holder to change the tool runout.

Select to compare

Configure now
Starting from^∗ ：	139.23 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Application
Groove Width(mm)
Maximum Machining Diameter(mm)
Maximum Groove Depth(mm)
Cutting Direction
Number of corners for tip use
Shank height(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	KYOCERA	KYOCERA	SANDVIK	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	KYOCERA	KYOCERA	KYOCERA	NGK SPARK PLUG	SANDVIK	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product Series	Multi-Functional / Grooving (Cutting-Off) Chip GMM Type	Punching Blade KTKB-S Type	Lathe Turning / Cutting Holder KGD Model (Combination)	SANDVIK Hydraulic Clamping Unit	SANDVIK Driven Tool Holder for BMT-P Turrets	Lathe Turning (Cutter) Bit GDM Model	Grooved End Face Blade KGDF Type	SANDVIK BMT Turret Interface to Blade Adaptor	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Slit Tip GDM Type	T-Max Q-Cut Plunging / Grooving Shank Bit	SANDVIK Driven Tool Holder for Okuma Machines	SANDVIK VDI to Coromant Capto Clamping Unit	SANDVIK Manual Clamping Unit	SANDVIK Coromant Capto to Rectangular Shank Adaptor	KGDS-S Type Blade for Grooving / Plunging	Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)	Cutter Holder TKN Type	Kyocera Mill Routing Tip Holder	SANDVIK T-Max Q-Cut Blade for Parting	Lathe Turning / Cutting (Multi-Function) Bit GMM Model	Multi-Functional / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Sliding Grooving Holder KIGM-8 Type (Blade Width 8 mm Tip Use / Large Inner Diameter Deep Grooving)	Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type	Holder For Grooving SCRUM DUO (Shank: 10 to 16) GTWPR / L-1	SANDVIK Driven Tool Holder for Gildemeister Machines	Lathe Turning / Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)	KGDF Type End Face Grooving GDFM / GDFMS Types	Tool Block for Holding Blade, KTKTB Type (Split Type)	T-Max Q-Cut Plunging / Grooving Cutting Head Type 570	CoroCut 1 / 2 Plunging / Grooving Boring Bit	CoroCut 1 / 2 Plunging / Grooving Shank Bit	CoroCut, Q Cut, Blade / Adapter	Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123	CoroTurn SL T-Max Q-Cut SL Blade For Grooving And Cut-Off 570-R / L151.21	SANDVIK Mazak Turret Interface to Blade Adaptor	SANDVIK T-Max Q-Cut Tool Block for Blades	SANDVIK Driven Tool Holder for Mori Seiki Machines	Outer Diameter Shallow Groove Holder KGBA Type	Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type	Lathe Turning (Cutter) Bit GDG Model	Lathe Turning (Cutter) Holder KGD Model (for Combination / Automatic Type)	Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving and End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)	Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve
Starting from^∗	19.09 € *Unit price with basic configuration	113.24 € *Unit price with basic configuration	125.47 € *Unit price with basic configuration	3,798.54 € *Unit price with basic configuration	-	15.30 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024	116.67 € *Unit price with basic configuration	-	19.72 € *Unit price with basic configuration	19.72 € *Unit price with basic configuration	190.68 € *Unit price with basic configuration	-	966.08 € *Unit price with basic configuration	-	578.77 € *Unit price with basic configuration	115.17 € *Unit price with basic configuration	127.36 € *Unit price with basic configuration	13.52 € *Unit price with basic configuration	155.37 € *Unit price with basic configuration	-	16.04 € *Unit price with basic configuration	476.05 € *Unit price with basic configuration	218.99 € *Unit price with basic configuration	172.47 € *Unit price with basic configuration	7,220.00 € *Unit price with basic configuration	126.73 € *Unit price with basic configuration	11.42 € *Unit price with basic configuration	247.81 € *Unit price with basic configuration	480.54 € *Unit price with basic configuration	497.79 € *Unit price with basic configuration	190.68 € *Unit price with basic configuration	232.95 € *Unit price with basic configuration	251.73 € *Unit price with basic configuration	176.78 € *Unit price with basic configuration	1,632.54 € *Unit price with basic configuration	375.62 € *Unit price with basic configuration	-	118.37 € *Unit price with basic configuration	104.15 € *Unit price with basic configuration	22.35 € *Unit price with basic configuration	119.59 € *Unit price with basic configuration	158.76 € *Unit price with basic configuration	18.46 € *Unit price with basic configuration	144.07 € *Unit price with basic configuration	139.23 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	6 Days	5 Days	5 Days	Same day	6 Days	5 Days	6 Days	6 Days	8 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	5 Days	6 Days	8 Days	8 Days	14 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	5 Days	5 Days	5 Days	6 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	7 Days
Application	-	-	-	-	-	-	-	-	-	-	Outer Diameter Grooving / Cutting off / Profiling	-	-	-	-	-	-	-	Cutting off	-	-	-	-	Outer Diameter Grooving	-	-	-	-	Inner Diameter Grooving / Horizontal feeding / Profiling	Inner Diameter Grooving / Profiling	Outer Diameter Grooving / Cutting off / Profiling	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	-	-	-	-	-	-	-	-	-	-	-
Groove Width(mm)	-	-	-	-	-	-	-	-	-	-	2 ～ 6	-	-	-	-	-	-	-	-	-	-	-	-	3 ～ 6	-	-	-	-	2 ～ 4	2 ～ 6	1.5 ～ 15	2 ～ 15	1.5 ～ 3	2	-	-	-	-	-	-	-	-	-	-	-
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	ø42	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Groove Depth(mm)	-	-	-	-	-	-	-	-	-	-	15 ～ 32	-	-	-	-	-	-	-	-	-	-	-	-	7 ～ 9	-	-	-	-	4.5 ～ 17.6	9 ～ 13	8 ～ 50	20 ～ 120	-	20 ～ 32	-	-	-	-	-	-	-	-	-	-	-
Cutting Direction	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	-	No-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand	No-hand	Right-hand / Left-hand	No-hand
Number of corners for tip use	-	-	-	-	-	-	-	-	-	-	1 Corner	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1 Corner	2 Corner	1 Corner / 2 Corner	1 Corner / 2 Corner	2 Corner	1 Corner	-	-	-	-	-	-	-	-	-	-	-
Shank height(mm)	-	-	-	-	-	-	-	-	-	-	16 ～ 32	-	30 ～ 60	80 ～ 208	12 ～ 32	-	-	-	-	17.48 ～ 79.5	-	-	-	-	-	-	-	-	-	30 ～ 47	10 ～ 40	25.9 ～ 101.6	10 ～ 16	-	-	19.05 ～ 40	-	-	-	-	-	-	-	-	-

1
2
3
4
5
Next >>

Filter by:

Stock

- Show only stock items
Clear

Application
Clear

Groove Width(mm)
0.30 to 3.00

0.5-3.18

0.50 to 2.00

0.7-2.0

1.00 to 2.00

1.00 to 2.49

1.45 to 3.00

1.5

1.50 to 2.00

1.75 to 2.00

2

2.0 to 2.5

2.00 to 3.49

2.5

2.50 to 3.00

2.65

3

3.00 to 3.50

3.17

3.50 to 5.50

4

4.00 to 5.90

4.75

5

5(6)

6

6.00 to 7.90

6.35

8

8.00 to 9.00

9

10

11

12

15
Clear

Maximum Machining Diameter(mm)
1

16

20

30

35

40

ø42

44

50

50（∞）

56

60

65

70

70（∞）

72

75

80

85

95

98

100

100（∞）

110

115

130

140

145

150

150（∞）

160

180

200

220

230

235

250（∞）

300

400

500

800

980

1000

2000

∞
Clear

Maximum Groove Depth(mm)
1

1.6

2

2.7

3

3.5

4

4.5

4.6

5

5.1

5.1(4.6)

5.1(5.1)

5.5

5.6

6

6.4

6.6

7

7.6

8

8.1

8.1(6.6)

8.1(8.1)

8.2

8.5

8.69

8.7

9

9.5

10

10.7

11

12

13

15

16

17

17.6

18

19

20

22

25

28

29

30

32

33

35

38

40

45

50

55

60

65

100

120
Clear

Cutting Direction
Drawing

Clear

Number of corners for tip use
Images

Clear

Shank height(mm)
8

10

12

15

16

17.48

17.5

19

19.05

19.5

20

22.4

25

25.4

25.9

28.7

30

31.75

31.9

32

37

38.1

40

44.5

47

48.3

50

50.8

51.01

57.2

60

63.5

79.5

80

101.6

135

155

208
Clear