¡Estamos traduciendo nuestra tienda online al español!
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.
Drill Bits
Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
485 Series de productos
* Información sobre días de envío, gastos de envío y precios
NACHI(FUJIKOSHI)
High efficiency processing of aluminum alloy is possible.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1.2 ～ 13 16 ～ 101 Aluminum[◎] / Copper[◎] High-speed steel 50 ～ 158 End Mill Shank / Straight Shank Available DLC N/A ConfigurarPrecio (IVA no incluido) a partir de:9.57 €Fecha de envío normal:6 días laborables
MISUMI
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
[Features] -Ideal for high-precision small-diameter drilling-The shank diameter is standardised at 3 mm and enables high-precision clamping-The combination of super-fine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.76 ～ 1.86 8 ～ 12 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 38 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:36.61 €Fecha de envío normal:7 días laborables
MISUMI
TiAlN Coated Carbide Drill, Straight Shank / Regular
[Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1 ～ 8 12 ～ 75 General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 34 ～ 117 Straight Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:22.24 €Fecha de envío normal:5 días laborables
MISUMI
Carbide Drill, Straight Shank / Stub
[Features] -Multi-faceted uncoated carbide drill bit for a wide range of applications-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.5 ～ 8 3 ～ 37 General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 20 ～ 79 Straight Shank N/A - N/A ConfigurarPrecio (IVA no incluido) a partir de:11.04 €Fecha de envío normal:5 días laborables
NACHI(FUJIKOSHI)
Starting drill for positioning use. Can perform centering, chamfering, and even V grooving.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 9 ～ 40 General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Cobalt HSS - - - - - ConfigurarPrecio (IVA no incluido) a partir de:22.30 €Fecha de envío normal:6 días laborables
OSG
General purpose type point angle 90° leading drill long shank type. Ideal for chamfering deep parts.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 25 11 ～ 60 General Steel[◎] / Cast Iron[○] / Aluminum[○] High-speed steel 75 ～ 250 Straight Shank N/A Non-Coated N/A ConfigurarPrecio (IVA no incluido) a partir de:14.23 €Fecha de envío normal:6 días laborables
SANDVIK
Super U Drill - Cylindrical Shank
With an indexable drill, balanced cutting and table feed up to twice as high are possible through stepped biting at the entrance, improving the precision of the processed hole.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 12.5 ～ 63 28 ～ 220 General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] - 91 ～ 331 End Mill Shank / Straight Shank - - N/A ConfigurarPrecio (IVA no incluido) a partir de:599.85 €Fecha de envío normal:6 días laborables
OSG
Phoenix Head Replaceable Drill PXD Head PXD-PC
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 14 ～ 25.4 - General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] - - - Available Other - ConfigurarPrecio (IVA no incluido) a partir de:76.30 €Fecha de envío normal:6 días laborables
OSG
Phoenix Head Replaceable Drill PXD Head PXD-NC
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 14 ～ 25.4 - Aluminum[◎] / Copper[○] - - - Available Other - ConfigurarPrecio (IVA no incluido) a partir de:76.30 €Fecha de envío normal:6 días laborables
TWININGS
As it is made of HSS material, it has high hardness and can be used for deep hole drilling at high speed.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.45 ～ 7.05 10 ～ 90 - High-speed steel 75 ～ 200 - N/A Non-Coated N/A ConfigurarPrecio (IVA no incluido) a partir de:10.77 €Fecha de envío normal:8 días laborables
- DESCUENTO
GUHRING
Cobalt Straight Drill (Bagged Type)
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5 52 - Cobalt HSS 86 - - - - ConfigurarPrecio (IVA no incluido) a partir de:7.73 €Precio especialFecha de envío normal:Artículo en stock: 1 día laborablePosible envío el mismo día
OSG
Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil holeMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2.8 ～ 20 17 ～ 100 General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] Carbide 66 ～ 165 End Mill Shank / Straight Shank Available Other Available ConfigurarPrecio (IVA no incluido) a partir de:65.10 €Fecha de envío normal:6 días laborables
OSG
HYP-HP-3D, Carbide drill with WDI coating, up to 3xD
Carbide drill with WDI coating, up to 3xD - General purposeMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - - - - - - - - ConfigurarPrecio (IVA no incluido) a partir de:22.90 €Fecha de envío normal:4 días laborables
OSG
HYP-HP-5D, Carbide drill with WDI coating, up to 5xD
Carbide drill with WDI coating, up to 5xD - General purposeMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - - - - - - - - ConfigurarPrecio (IVA no incluido) a partir de:24.50 €Fecha de envío normal:4 días laborables
SANDVIK
[Specifications]・Grade: Indexable insert included・Drill type: Indexable insert drill・eClass-5.1: 21010103For trepanning operations Excellent reliability in unstable applications and lathe applications Internal coolant supply Stack drilling cartridges available.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 60 ～ 110 - General Steel[○] / Stainless Steel[○] / Cast Iron[○] - - - - - - ConfigurarPrecio (IVA no incluido) a partir de:1,603.31 €Fecha de envío normal:5 días laborables
MISUMI
TS Coated Carbide Composite Spiral Drill, Stub Model
[Features] -Designed with a 30° helix angle near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 12 20 ～ 55 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 50 ～ 115 End Mill Shank Available - N/A ConfigurarPrecio (IVA no incluido) a partir de:100.34 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
[Features] -Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously-Supports a wide range of materials, from general steel to stainless steel-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 20 ～ 71 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 62 ～ 124 End Mill Shank Available TiAlN Available / N/A ConfigurarPrecio (IVA no incluido) a partir de:55.26 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow conditionMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 13 12 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 46 ～ 124 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:60.30 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Double Margin Drill, Regular
[Features] -Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling-Supports a wide range of materials, from general steel to stainless steel-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1 ～ 11 12 ～ 71 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 45 ～ 118 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:81.68 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
[Features] -The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation-The use of triple rake and R-type thinning achieves high centripetal force-Designed with larger core diameter than TAC-ESDBA to improve durability-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 20 ～ 60 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 66 ～ 107 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:43.17 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
By applying three rake + R thinning, it demonstrates a high level of afferent.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 28 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 66 ～ 124 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:51.08 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
[Features] -Corner radius treatment suppresses chipping-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow-High centripetal force is achieved by using three chip and R thinning-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 16 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 49 ～ 124 Straight Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:40.58 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
[Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole toleranceMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 8 20 ～ 41 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] Carbide 62 ～ 79 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:40.39 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
[Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a wavy edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape and R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole toleranceMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 28 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] Carbide 66 ～ 124 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:47.83 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
[Features] -Internal lubrication efficiently evacuates chips and improves tool life-Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning-Suppresses chipping by adopting chamfer treatment on the shoulder-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole toleranceMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 4.2 24 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] Carbide 66 End Mill Shank Available TiAlN Available ConfigurarPrecio (IVA no incluido) a partir de:107.05 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
[Features] -Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a fluted cutting edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole toleranceMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 16 ～ 78 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] Carbide 46 ～ 137 Straight Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:36.40 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill, Stub
[Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.3 ～ 6 2 ～ 28 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Carbide 38 ～ 66 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:23.17 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill, Regular
[Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.3 ～ 13 3 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Carbide 38 ～ 124 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:22.49 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill, Regular Model with Oil Holes
[Features] -Internal lubrication efficiently evacuates chips and improves tool life-Supports a wide range of materials, from general steel to stainless steel-Achieves excellent strength by adopting a straight cutting edge-Demonstrates high centripetal force by using three chip and X-type thinning-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 28 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Carbide 66 ～ 124 End Mill Shank Available TiAlN Available ConfigurarPrecio (IVA no incluido) a partir de:78.87 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill, Straight Shank / Stub Model
[Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the drill, its performance, pricing, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1.1 ～ 8 7 ～ 37 General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 28 ～ 79 Straight Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:20.63 €Fecha de envío normal:5 días laborables
MISUMI
Carbide Drill, Straight Shank / Regular
[Features] -Multi-faceted uncoated carbide drill bit for a variety of applications-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1 ～ 7.5 12 ～ 69 General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 34 ～ 109 Straight Shank N/A - N/A ConfigurarPrecio (IVA no incluido) a partir de:12.59 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Long Drill, Straight Shank
Carbide long drill that achieves the high efficiency deep-hole drillingMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 10 60 ～ 140 General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 100 ～ 200 Straight Shank Available TiAlN Available / N/A ConfigurarPrecio (IVA no incluido) a partir de:96.39 €Fecha de envío normal:5 días laborables
MISUMI
TS Coated Carbide Drill for High-Hardness Steel Machining, With Corner Radius / Stub
[Features] -Weak helix and large core diameter improve tool rigidity-Achieves excellent strength by using a straight cutting edge-Cutting edge chipping is suppressed by corner radius machining, and cracks at the bottom of blind holes in workpieces are also suppressed-Ideal for machining high hardness steel from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 20 ～ 60 Quenched and tempered steel[○] / High Hardness Steel[◎] Carbide 62 ～ 107 End Mill Shank Available - N/A ConfigurarPrecio (IVA no incluido) a partir de:63.12 €Fecha de envío normal:5 días laborables
MISUMI
TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular
[Features] -Weak helix angle and high core diameter improve the rigidity of the tool-Achieves excellent strength by using a straight cutting edge-Ideal for machining high hardness steels from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 20 ～ 71 Quenched and tempered steel[○] / High Hardness Steel[◎] Carbide 62 ～ 118 End Mill Shank Available - N/A ConfigurarPrecio (IVA no incluido) a partir de:56.38 €Fecha de envío normal:5 días laborables
MISUMI
TS Coated Carbide Drill for High-Hardness Steel Machining, Straight Shank / Stub, Regular
[Features] -Weak spiral angle and high core diameter improve tool rigidity-Achieves excellent strength by using a straight cutting edge-Ideal for machining high hardness steels from HRC40 to 60-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 16 ～ 78 Quenched and tempered steel[○] / High Hardness Steel[◎] Carbide 46 ～ 137 Straight Shank Available - N/A ConfigurarPrecio (IVA no incluido) a partir de:53.49 €Fecha de envío normal:5 días laborables
MISUMI
TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
A small radius type of the high-hardness steel seriesMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.8 ～ 3 6 ～ 27 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 47 ～ 67 End Mill Shank Available - N/A ConfigurarPrecio (IVA no incluido) a partir de:42.03 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
[Features] -MIAutomatic steelI-Original shape ideal for EN 1.4016 Equiv. machining-Designed with a helix angle of 38° near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Superfine carbide alloy provides excellent abrasion resistance and enables high speed machining-125° tip angle and combined helix angle improve cutting performance.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 10 28 ～ 61 Stainless Steel[◎] Carbide 60 ～ 120 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:117.87 €Fecha de envío normal:5 días laborables
MISUMI
DLC Coated Carbide Drill for Aluminium Machining, Composite Spiral / Regular Model
[Features] -Designed with a helix angle of 38° near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-120° tip angle and combined helix angle improve durability when machining aluminium.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5 ～ 6.5 44 ～ 53 Aluminum[◎] Carbide 90 ～ 110 End Mill Shank Available DLC N/A ConfigurarPrecio (IVA no incluido) a partir de:166.31 €Fecha de envío normal:5 días laborables
MISUMI
DLC Coated Carbide Drill for Aluminium Machining, Regular
[Features] -The DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for machining non-ferrous metals such as aluminium and copper-The high helix shape provides excellent chip evacuation and sharpness-The size range is suitable for drilling pilot holes for plastic processing with mould taps where precision is difficult to control-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, scope of services, prices, etc.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5.52 ～ 11.38 41 ～ 71 Cast Iron[○] / Aluminum[◎] / Copper[○] Carbide 85 ～ 128 End Mill Shank Available DLC N/A ConfigurarPrecio (IVA no incluido) a partir de:83.76 €Fecha de envío normal:5 días laborables
MISUMI
Carbide Burnishing Drill, Straight Model
[Features] -Enables high-precision drilling of aluminium without pre-drilling-Tip diameter can be specified in units of 0.01mm and flute length in units of 0.1mm.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0 0 Cast Iron[○] / Aluminum[◎] / Copper[○] Carbide 40 ～ 60 End Mill Shank N/A - N/A ConfigurarFecha de envío normal:8 días laborables
MISUMI
Carbide Burnishing Drill, Stepped Model
[Features] -No complicated estimations required. It is possible to order the part number of the step drill without drawings.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - Cast Iron[○] / Aluminum[◎] / Copper[○] Carbide 40 ～ 60 End Mill Shank N/A - N/A ConfigurarFecha de envío normal:8 días laborables
MISUMI
Carbide Drill for Resin Machining, Straight Shank / Stub Model
[Features] -Carbide drills suitable for epoxy resins, phenolic resins, fibreglass and carbon fibre curing resins, etc.-The crescent cutting shape suppresses fraying, flaking and fraying of the resin-specific surface layerMás informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 10 12 ～ 43 Resin[◎] Carbide 38 ～ 89 Straight Shank N/A - N/A ConfigurarPrecio (IVA no incluido) a partir de:38.29 €Fecha de envío normal:5 días laborables
MISUMI
TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
[Features] -Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible-Wide flute design promotes chip flow.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5 ～ 12 44 ～ 71 Cast Iron[◎] / Aluminum[○] / Copper[○] Carbide 82 ～ 118 End Mill Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:70.12 €Fecha de envío normal:5 días laborables
MISUMI
[Features] -No complicated estimates required. It is possible to order the part number of the step drill without drawings.Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide - Straight Shank N/A - N/A ConfigurarFecha de envío normal:12 días laborables
MISUMI
(DLC-SC-SDR)-Drilling and countersinking holes for screws can be done in one operation, resulting in highly efficient machining (countersink type)-Since relief holes can be drilled at the same time as drilling pilot holes for power strips, it is ideal for drilling pilot holes in thick panels that require relief (single-cut type).Más informaciónHole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3.4 ～ 10.3 21 ～ 72 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 73 ～ 136 Straight Shank Available TiAlN N/A ConfigurarPrecio (IVA no incluido) a partir de:81.59 €Fecha de envío normal:5 días laborables