SANDVIK
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
60 ~ 110 | - | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | - | - | - | - | - | - |
SANDVIK
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 6 | - | - | - | 30 ~ 60 | Straight Shank | - | - | N/A |
ATOM
Micro Drill Standard Tip Length
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.02 ~ 3 | 0.2 ~ 25 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | Carbide | 38 ~ 50 | End Mill Shank | N/A | Non-Coated | N/A |
MISUMI
TiAlN Coated Carbide Drill, Regular
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 3 ~ 77 | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Carbide | 38 ~ 124 | End Mill Shank | Available | TiAlN | N/A |
MISUMI
Carbide Step Drill Bit, With Custom Dimensions
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
- | - | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Carbide | - | End Mill Shank | N/A | - | N/A |
IWATA TOOL
Toglon Hard Drill Regular ALT Coating
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1 ~ 6 | 6 ~ 36 | Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○] | Carbide | 50 ~ 120 | End Mill Shank | Available | TiAlN | N/A |
OSG
Solid Carbide Drill 20D Type With Oil Hole ADO-20D
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 70 ~ 270 | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | Carbide | 120 ~ 330 | End Mill Shank | Available | Other | Available |
SANDVIK
SANDVIK CoroDrill Delta-C Solid Carbide Drill
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1.5 ~ 20 | - | Titanium[○] | - | 32 ~ 187 | - | - | - | - |
ATOM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.3 ~ 13 | 4 ~ 50 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | Carbide | 30 ~ 100 | Straight Shank | N/A | Non-Coated | N/A |
GUHRING
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2.5 ~ 8 | 155 ~ 440 | - | Carbide | 185 ~ 485 | - | Available | Other | Available |
OSG
Solid Carbide Drill 15D Type With Oil Hole ADO-15D
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3 ~ 12 | 55 ~ 215 | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] | Carbide | 105 ~ 280 | End Mill Shank | Available | Other | Available |
OSG
Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 18 ~ 140 | General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] | Carbide | 70 ~ 205 | End Mill Shank / Straight Shank | Available | Other | Available |
TOYO DRILL
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.5 | - | General Steel[○] / Machinable Ceramics[○] | - | 50 | Straight Shank | N/A | - | N/A |
OSG
HYP-HP-5D, Carbide drill with WDI coating, up to 5xD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
MISUMI
DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
6.8 ~ 10.3 | 48 ~ 72 | Cast Iron[○] / Aluminum[◎] / Copper[○] | Carbide | 104 ~ 136 | Straight Shank | Available | DLC | N/A |
ATOM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.035 ~ 1.995 | 0.4 ~ 22 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | Carbide | 38 ~ 50 | End Mill Shank | N/A | Non-Coated | N/A |
ATOM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.04 ~ 1.5 | 0.4 ~ 10 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | Carbide | 38 | End Mill Shank | N/A | Non-Coated | N/A |
GUHRING
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2.5 ~ 12 | 85 ~ 360 | - | Carbide | 115 ~ 420 | - | Available | Other | Available |
GUHRING
Micro Drill Reamer, Type-N 701
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.25 ~ 1.4 | 1.9 ~ 9.5 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○] / Resin[○] | Carbide | 25 | - | N/A | - | N/A |
OSG
HYP-HPO-5D, Carbide drill with internal coolant, WDI coating, up to 5xD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
MISUMI
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.38 ~ 2.7 | 6 ~ 12 | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | Carbide | 38 | End Mill Shank | Available | TiAlN | N/A |
MISUMI
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.4 ~ 10.3 | 21 ~ 72 | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Carbide | 73 ~ 136 | Straight Shank | Available | TiAlN | N/A |
OSG
Carbide Micro Revolution Drill for Stainless Steel, MRS-GDL
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.44 ~ 3 | 6 ~ 36 | Stainless Steel[◎] | Carbide | 38 ~ 66 | End Mill Shank / Straight Shank | Available | Other | N/A |
OSG
Carbide Stub Type for Small Diameter / Precision Machining WX-MS-GDS
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.19 ~ 5 | 1.2 ~ 26 | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Carbide | 38 ~ 64 | End Mill Shank / Straight Shank | Available | Other | N/A |
NS TOOL
MUGEN-COATING Miniature Drill MDR-R
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
.0.4 ~ 1 | 1.2 ~ 10 | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Carbide | 38 | End Mill Shank | Available | TiAlN | - |
OSG
Carbide Drill Carbide for High Hardness Steel (From 70HRC)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 12 | 12 ~ 76 | High Hardness Steel[◎] | Carbide | 42 ~ 120 | End Mill Shank / Straight Shank | Available | Other | N/A |
GUHRING
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1.2 ~ 3.2 | 45 | - | Carbide | 90 ~ 100 | - | N/A | - | Available |
WIDIA
VariDrill Solid Carbide Drill 8xD VDS403A
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
5 | 56 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Carbide | 94 | End Mill Shank | Available | TiAlN | Available |
SANDVIK
SANDVIK CoroDrill 860 Solid Carbide Drill
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3 ~ 20 | - | General Steel[○] / Stainless Steel[○] / Aluminum[○] | - | 62 ~ 257 | - | - | - | - |
MISUMI
Carbide Burnishing Drill, Straight Model
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0 | 0 | Cast Iron[○] / Aluminum[◎] / Copper[○] | Carbide | 40 ~ 60 | End Mill Shank | N/A | - | N/A |
NACHI(FUJIKOSHI)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
4.21 ~ 12.55 | 22 ~ 51 | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] | Carbide | 66 ~ 110 | End Mill Shank / Straight Shank | Available | Other | N/A |
NACHI(FUJIKOSHI)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 15.8 | 1.65 ~ 72 | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | Carbide | 47 ~ 115 | End Mill Shank / Straight Shank | Available | Other | N/A |
UNION TOOL
C-UMD Iron and Steel Drill, Unimax Drill
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.11 ~ 2.85 | 1.2 ~ 12 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] | Carbide | 38 | End Mill Shank | Available | Other | N/A |
NS TOOL
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.01 ~ 0.1 | 0.1 ~ 1 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Carbide | 40 | End Mill Shank | Available | TiAlN | N/A |
NS TOOL
MUGEN-COATING Point Drill (for Pilot Hole Machining) MDR-PD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.1 ~ 1 | 0.2 ~ 2 | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Carbide | 38 | End Mill Shank | Available | TiAlN | - |
OSG
Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.3 ~ 12 | 32 ~ 96 | Quenched and tempered steel[◎] / High Hardness Steel[◎] | Carbide | 78 ~ 156 | End Mill Shank / Straight Shank | Available | Other | Available |
IWATA TOOL
Toglon Hard Drill Short ALD Coating
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1 ~ 12 | 6 ~ 51 | High Hardness Steel[○] | Carbide | 50 ~ 110 | End Mill Shank | Available | TiAlN | N/A |
ATOM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.03 ~ 3 | 0.6 ~ 40 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | Carbide | 38 ~ 65 | End Mill Shank | N/A | Non-Coated | N/A |
GUHRING
Micro Drill, 7 X D, Type-N 6401
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.8 ~ 3 | 6.4 ~ 27 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | Carbide | 47 ~ 67 | - | Available | Other | N/A |
GUHRING
Micro Drill, 8 X D, Type-N 6408
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1.4 ~ 3 | 15 ~ 33 | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | Carbide | 52 ~ 66 | - | Available | Other | Available |
KYOWA SEIKO
Carbide Solid Pivot Type Drill KDR-2
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.03 ~ 3 | 0.3 ~ 25 | General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] | Carbide | 38 ~ 50 | End Mill Shank | N/A | - | N/A |
KYOWA SEIKO
Carbide Drill with Step and 90° Chamfering Blade KDD-2
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 6 | 2 ~ 25 | General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] | - | 50 ~ 80 | End Mill Shank | N/A | - | N/A |
ATOM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.03 ~ 0.99 | 0.5 ~ 11 | General Steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] / Resin[○] | Carbide | 38 | End Mill Shank | N/A | Non-Coated | N/A |
OSG
Solid Carbide Drill 3D Type With Oil Hole ADO-3D
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 12 ~ 100 | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Carbide | 66 ~ 165 | End Mill Shank | Available | Other | Available |
OSG
Solid Carbide Drill 5D Type with Oil Hole ADO-5D
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 20 | 18 ~ 160 | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Carbide | 70 ~ 225 | End Mill Shank | Available | Other | Available |