Carbide Drills
321 artículos
* Información sobre días de envío, gastos de envío y precios
SANDVIK
[Specifications]・Grade: Indexable insert included・Drill type: Indexable insert drill・eClass-5.1: 21010103For trepanning operations Excellent reliability in unstable applications and lathe applications Internal coolant supply Stack drilling cartridges available.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 60 ～ 110 - General Steel[○] / Stainless Steel[○] / Cast Iron[○] - - - - - - ConfigurarPrecio normal (IVA no incluidos):1,603.31 €～Fecha de envío normal:5 días laborables
SANDVIK
Broken socket strip removal toolIt removes broken socket strips with a strong cutting edge.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 6 - - - 30 ～ 60 Straight Shank - - N/A ConfigurarPrecio normal (IVA no incluidos):53.14 €～Fecha de envío normal:6 días laborables
GUHRING
A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2.5 ～ 8 155 ～ 440 - Carbide 185 ～ 485 - Available Other Available ConfigurarPrecio normal (IVA no incluidos):334.25 €～Fecha de envío normal:24 días laborables
- Volume Discount
OSG
Solid Carbide Drill 2D Type AD-2D
[Features]· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chipsMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 12 14 ～ 55 General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] Carbide 62 ～ 102 End Mill Shank Available Other N/A ConfigurarPrecio normal (IVA no incluidos):37.21 €～Fecha de envío normal:6 días laborables
- Volume Discount
UNION TOOL
C-UMD Iron and Steel Drill, Unimax Drill
[Features] -UT micro-coating.Tip angle 150-Tool material: carbide.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.11 ～ 2.85 1.2 ～ 12 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○] Carbide 38 End Mill Shank Available Other N/A ConfigurarPrecio normal (IVA no incluidos):20.19 €～Fecha de envío normal:6 días laborables
- DESCUENTO
- Volume Discount
ATOM
The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.035 ～ 1.995 0.4 ～ 22 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] Carbide 38 ～ 50 End Mill Shank N/A Non-Coated N/A ConfigurarPrecio normal (IVA no incluidos):42.56 €～Precio normal (IVA no incluidos):Precio especialFecha de envío normal:Artículo en stock: 1 día laborableAlgunos artículos se pueden enviar el mismo día
OSG
HYP-HP-5D, Carbide drill with WDI coating, up to 5xD
Carbide drill with WDI coating, up to 5xD - General purposeMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - - - - - - - - ConfigurarPrecio normal (IVA no incluidos):24.50 €～Fecha de envío normal:2 días laborables
OSG
HYP-HPO-5D-HE, Carbide drill with internal coolant, WDI coating, up to 5xD
Carbide drill with internal coolant, WDI coating, up to 5xD - With Whistle Notch shank for general purposeMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - - - - - - - - ConfigurarPrecio normal (IVA no incluidos):60.90 €～Fecha de envío normal:2 días laborables
- Volume Discount
MISUMI
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
[Features] -Ideal for high-precision small-diameter drilling-The shank diameter is standardised at 3 mm and enables high-precision clamping-The combination of super-fine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.38 ～ 2.7 6 ～ 12 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 38 End Mill Shank Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):38.08 €～Fecha de envío normal:5 días laborables
- DESCUENTO
- Volume Discount
ATOM
Micro Drill Standard Tip Length
A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.02 ～ 3 0.2 ～ 25 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] Carbide 38 ～ 50 End Mill Shank N/A Non-Coated N/A ConfigurarPrecio normal (IVA no incluidos):28.41 €～Precio normal (IVA no incluidos):Precio especialFecha de envío normal:Artículo en stock: 1 día laborableAlgunos artículos se pueden enviar el mismo día
GUHRING
Micro Drill, 7 X D, Type-N 6401
Improves chip disposal by increasing groove width, allowing stable small diameter hole milling.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.8 ～ 3 6.4 ～ 27 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] Carbide 47 ～ 67 - Available Other N/A ConfigurarPrecio normal (IVA no incluidos):106.39 €～Fecha de envío normal:6 días laborables
- Volume Discount
OSG
Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil holeMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 20 18 ～ 140 General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] Carbide 70 ～ 205 End Mill Shank / Straight Shank Available Other Available ConfigurarPrecio normal (IVA no incluidos):85.18 €～Fecha de envío normal:6 días laborables
OSG
HYP-HPO-8D, Carbide drill with internal coolant, WDI coating, up to 8xD
Carbide drill with internal coolant, WDI coating, up to 8xD - General purposeMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - - - - - - - - ConfigurarPrecio normal (IVA no incluidos):85.50 €～Fecha de envío normal:2 días laborables
SANDVIK
SANDVIK CoroDrill 860 Solid Carbide Drill
Hole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 - General Steel[○] / Stainless Steel[○] / Aluminum[○] - 62 ～ 257 - - - - ConfigurarPrecio normal (IVA no incluidos):128.77 €～Fecha de envío normal:5 días laborables
OSG
Carbide Stub Type for High Hardness Steel FH-GDS
Developed For Crafting Small Diameter Holes in Hardened Steel And is Suited For High Precision / Long Life Crafting of Shallow (Approx. 3D) Holes.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.3 ～ 2 1.6 ～ 12 Quenched and tempered steel[○] / High Hardness Steel[◎] Carbide 38 ～ 46 End Mill Shank Available Other Available ConfigurarPrecio normal (IVA no incluidos):52.37 €～Fecha de envío normal:6 días laborables
MITSUBISHI MATERIALS
A blade tip replacement type carbide insert drill.[Features]· Economical insert that uses four corners.· Grade and breaker combination can support a wide range of cut materials.· High rigidity holder.[Applications]· High-efficiency machining for large diameter sizes.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 12 ～ 55 29 ～ 185 General Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] Carbide 82 ～ 265 End Mill Shank / Straight Shank N/A - Available ConfigurarPrecio normal (IVA no incluidos):299.10 €～Fecha de envío normal:8 días laborables
- Volume Discount
OSG
Carbide Drill Carbide for High Hardness Steel (From 70HRC)
Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 12 12 ～ 76 High Hardness Steel[◎] Carbide 42 ～ 120 End Mill Shank / Straight Shank Available Other N/A ConfigurarPrecio normal (IVA no incluidos):102.10 €～Fecha de envío normal:6 días laborables
- DESCUENTO
- Volume Discount
ATOM
Micro Drill "NEO PRO" Short Blades
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.1 ～ 2.99 0.6 ～ 12 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] Carbide 38 End Mill Shank Available For General Steels (AlCrN, etc.) N/A ConfigurarPrecio normal (IVA no incluidos):35.70 €～Precio normal (IVA no incluidos):Precio especialFecha de envío normal:Artículo en stock: 1 día laborableAlgunos artículos se pueden enviar el mismo día
- Volume Discount
GUHRING
Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.1 ～ 3 1.2 ～ 12 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] Carbide 38 - Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):57.16 €～Fecha de envío normal:6 días laborables
OSG
Solid Carbide Drill 8D Type With Oil Hole ADO-8D
[Features]· Carbide 8D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holesMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 33 ～ 143 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Carbide 80 ～ 206 End Mill Shank Available Other Available ConfigurarPrecio normal (IVA no incluidos):89.32 €～Fecha de envío normal:6 días laborables
- Volume Discount
MISUMI
TiAlN Coated Carbide Drill, Regular
[Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.3 ～ 13 3 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Carbide 38 ～ 124 End Mill Shank Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):24.74 €～Fecha de envío normal:5 días laborables
MISUMI
[Features] -No complicated estimates required. It is possible to order the part number of the step drill without drawings.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide - Straight Shank N/A - N/A ConfigurarFecha de envío normal:12 días laborables
NACHI(FUJIKOSHI)
Countersinking drill with good drilling performance. Well suited for slanted surfaces and pilot drilling for tapping.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.5 ～ 15.8 1.65 ～ 72 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] Carbide 47 ～ 115 End Mill Shank / Straight Shank Available Other N/A ConfigurarPrecio normal (IVA no incluidos):88.05 €～Fecha de envío normal:5 días laborables
- Volume Discount
MITSUBISHI MATERIALS
Ultra-small diameter carbide solid drill.[Features]· Tool shape with attention to machining stability (wide margin width and shallow circumferential relief).· Stable ultra small diameter machining is enabled with large groove width with excellent chip discharge performance.[Applications]· Supports drilling small holes starting from φ0.1 (diameter 0.1 mm).Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.1 ～ 0.99 1.2 ～ 10 General Steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] Carbide 38 End Mill Shank Available TiN N/A ConfigurarPrecio normal (IVA no incluidos):37.38 €～Fecha de envío normal:6 días laborables
- Volume Discount
OSG
Carbide Drill High Hardness Steel with Oil Hole (From 55HRC)
Suitable for steel materials and NI-based alloys up to 55 HRC. Achieves Long Life Processing with Oil Hole SpecificationsMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3.3 ～ 12 32 ～ 96 Quenched and tempered steel[◎] / High Hardness Steel[◎] Carbide 78 ～ 156 End Mill Shank / Straight Shank Available Other Available ConfigurarPrecio normal (IVA no incluidos):159.00 €～Fecha de envío normal:6 días laborables
- DESCUENTO
- Volume Discount
IWATA TOOL
Toglon Hard Drill Regular ALT Coating
· 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1 ～ 6 6 ～ 36 Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○] Carbide 50 ～ 120 End Mill Shank Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):89.60 €～Precio normal (IVA no incluidos):Precio especialFecha de envío normal:Artículo en stock: 1 día laborableAlgunos artículos se pueden enviar el mismo día
- DESCUENTO
ATOM
Micro Drill, for Stainless Steel
Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.1 ～ 3 1 ～ 15 General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[◎] Carbide 38 ～ 45 End Mill Shank Available For General Steels (AlCrN, etc.) N/A ConfigurarPrecio normal (IVA no incluidos):39.15 €～Precio normal (IVA no incluidos):Precio especialFecha de envío normal:Artículo en stock: 1 día laborableAlgunos artículos se pueden enviar el mismo día
- DESCUENTO
- Volume Discount
ATOM
A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.04 ～ 1.5 0.4 ～ 10 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] Carbide 38 End Mill Shank N/A Non-Coated N/A ConfigurarPrecio normal (IVA no incluidos):28.41 €～Precio normal (IVA no incluidos):Precio especialFecha de envío normal:Artículo en stock: 1 día laborableAlgunos artículos se pueden enviar el mismo día
GUHRING
End Mill Shank Drill 7 x D with Oil Hole RT100U 5512
Internal lubrication enables high performance drilling without steps.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 30 ～ 190 General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Carbide 70 ～ 244 End Mill Shank Available Other Available ConfigurarPrecio normal (IVA no incluidos):168.40 €～Fecha de envío normal:8 días laborables
SANDVIK
Sandvik CoroDrill Delta-C Carbide Solid Drill 1220
[Features]· A solid drill that makes high-precision yet excellent surface roughness achievable.· Long and stable product life is achieved with TiN and TiAlN multiple-layer coating.· Versatile material applicable to any kind of workpiece.[Applications]· For drilling any kind of workpiece.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 11 - - Carbide 62 ～ 118 - - - - ConfigurarPrecio normal (IVA no incluidos):124.33 €～Fecha de envío normal:8 días laborables
- Volume Discount
OSG
Hole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 15 ～ 88 General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] Carbide 100 ～ 250 End Mill Shank / Straight Shank Available Other N/A ConfigurarPrecio normal (IVA no incluidos):89.70 €～Fecha de envío normal:6 días laborables
- Volume Discount
OSG
Solid Carbide Drill 3D Type With Oil Hole ADO-3D
[Features]· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chipsMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2 ～ 20 12 ～ 100 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Carbide 66 ～ 165 End Mill Shank Available Other Available ConfigurarPrecio normal (IVA no incluidos):65.10 €～Fecha de envío normal:6 días laborables
- Volume Discount
OSG
Solid Carbide Drill 3D Type With Oil Hole ADO-SUS-3D
[Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 3D type with oil holeMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 2.8 ～ 20 17 ～ 100 General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎] Carbide 66 ～ 165 End Mill Shank / Straight Shank Available Other Available ConfigurarPrecio normal (IVA no incluidos):65.10 €～Fecha de envío normal:6 días laborables
OSG
HYP-HPO-3D, Carbide drill with internal coolant, WDI coating, up to 3xD
Carbide drill with internal coolant, WDI coating, up to 3xD - General purposeMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - - - - - - - - ConfigurarPrecio normal (IVA no incluidos):47.60 €～Fecha de envío normal:2 días laborables
OSG
HYP-HPO-5D, Carbide drill with internal coolant, WDI coating, up to 5xD
Carbide drill with internal coolant, WDI coating, up to 5xD - General purposeMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole - - - - - - - - - ConfigurarPrecio normal (IVA no incluidos):60.90 €～Fecha de envío normal:2 días laborables
SANDVIK
SANDVIK CoroDrill 460 Solid Carbide Drill
Hole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 20 - General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] - 62 ～ 268.986 - - - - ConfigurarPrecio normal (IVA no incluidos):41.91 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TS Coated Carbide Composite Spiral Drill, Stub Model
[Features] -Designed with a 30° helix angle near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 12 20 ～ 55 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 50 ～ 115 End Mill Shank Available - N/A ConfigurarPrecio normal (IVA no incluidos):96.26 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TiAlN Coated Carbide Double Margin Drill, Regular
[Features] -Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling-Supports a wide range of materials, from general steel to stainless steel-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 1 ～ 11 12 ～ 71 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 45 ～ 118 End Mill Shank Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):78.36 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
[Features] -Corner radius treatment suppresses chipping-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow-High centripetal force is achieved by using three chip and R thinning-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 16 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] Carbide 49 ～ 124 Straight Shank Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):44.85 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
[Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a wavy edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape and R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole toleranceMás informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 13 28 ～ 77 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] Carbide 66 ～ 124 End Mill Shank Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):49.75 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
Carbide Drill, Straight Shank / Stub
[Features] -Multi-faceted uncoated carbide drill bit for a wide range of applications-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 0.5 ～ 8 3 ～ 37 General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 20 ～ 79 Straight Shank N/A - N/A ConfigurarPrecio normal (IVA no incluidos):11.46 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
[Features] -MIAutomatic steelI-Original shape ideal for EN 1.4016 Equiv. machining-Designed with a helix angle of 38° near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Superfine carbide alloy provides excellent abrasion resistance and enables high speed machining-125° tip angle and combined helix angle improve cutting performance.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 3 ～ 10 28 ～ 61 Stainless Steel[◎] Carbide 60 ～ 120 End Mill Shank Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):113.09 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model
[Features] -Designed with a helix angle of 38° near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-120° tip angle and combined helix angle improve durability when machining aluminium.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5 ～ 6.5 44 ～ 53 Aluminum[◎] Carbide 90 ～ 110 End Mill Shank Available DLC N/A ConfigurarPrecio normal (IVA no incluidos):159.56 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
DLC Coated Carbide Drill for Aluminum Machining, Regular
[Features] -The DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for machining non-ferrous metals such as aluminium and copper-The high helix shape provides excellent chip evacuation and sharpness-The size range is suitable for drilling pilot holes for plastic processing with mould taps where precision is difficult to control-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, scope of services, prices, etc.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5.52 ～ 11.38 41 ～ 71 Cast Iron[○] / Aluminum[◎] / Copper[○] Carbide 85 ～ 128 End Mill Shank Available DLC N/A ConfigurarPrecio normal (IVA no incluidos):87.13 €～Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
[Features] -Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible-Wide flute design promotes chip flow.Más informaciónHole diameter (drill diameter) D(mm) Groove Length L(mm) work material Tool Material Type Overall Length L(mm) Shank Type Coating Y/N Coating Type With/without Oil Hole 5 ～ 12 44 ～ 71 Cast Iron[◎] / Aluminum[○] / Copper[○] Carbide 82 ～ 118 End Mill Shank Available TiAlN N/A ConfigurarPrecio normal (IVA no incluidos):72.95 €～Fecha de envío normal:5 días laborables