Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
3 ～ 20	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	62 ～ 349	-	-	-	-

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
3.4 ～ 10.3	21 ～ 72	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Carbide	73 ～ 136	Straight Shank	Available	TiAlN	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
3 ～ 20	-	General Steel[○] / Stainless Steel[○] / Aluminum[○]	-	62 ～ 257	-	-	-	-

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
6.8 ～ 10.3	48 ～ 72	Cast Iron[○] / Aluminum[◎] / Copper[○]	Carbide	104 ～ 136	Straight Shank	Available	DLC	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
-	-	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Carbide	-	End Mill Shank	N/A	-	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
3.35 ～ 6.9	-	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Carbide	142	End Mill Shank	Available	Other	Available

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
5 ～ 14	-	General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	-	-	-	-	-

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
4.83 ～ 11.14	-	Stainless Steel[○] / Aluminum[○] / Titanium[○]	-	58 ～ 152.4	-	-	-	-

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
-	-	Cast Iron[○] / Aluminum[◎] / Copper[○]	Carbide	40 ～ 60	End Mill Shank	N/A	-	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
-	-	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Carbide	-	Straight Shank	N/A	-	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
-	-	Cast Iron[○] / Aluminum[○] / Copper[○]	Carbide	-	End Mill Shank	N/A	-	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
-	-	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Carbide	-	End Mill Shank	N/A	-	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
0.5 ～ 6	2 ～ 25	General Steel[○] / Quenched and tempered steel[○] / Aluminum[○]	-	50 ～ 80	End Mill Shank	N/A	-	N/A

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
6.60 / 8.90 ～ 7.40 / 9.80	-	-	-	-	-	-	-	-

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
3 ～ 20	-	General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	-	62 ～ 268.986	-	-	-	-

Hole diameter (drill diameter) D (mm)	Groove Length L (mm)	work material	Tool Material Type	Overall Length L (mm)	Shank Type	Coating Y/N	Coating Type	With/without Oil Hole
2 ～ 2.8	-	-	-	72 ～ 80	-	-	-	-

¡Estamos traduciendo nuestra tienda online al español!  
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Categoría

Condiciones del filtro

Despejar todo

Hole diameter (drill diameter) D (mm)
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- 3.05
- 3.1
- 3.15
- 3.17
- 3.18
- 3.2
- 3.25
- 3.26
- 3.3
- 3.35
- 3.38
- 3.4
- 3.45
- 3.5
- 3.55
- 3.57
- 3.6
- 3.65
- 3.66
- 3.7
- 3.73
- 3.75
- 3.8
- 3.85
- 3.86
- 3.9
- 3.91
- 3.95
- 3.97
- 3.99
- 4
- 4.04
- 4.05
- 4.09
- 4.1
- 4.15
- 4.2
- 4.22
- 4.25
- 4.3
- 4.31
- 4.35
- 4.36
- 4.37
- 4.39
- 4.4
- 4.45
- 4.5
- 4.55
- 4.57
- 4.6
- 4.62
- 4.65
- 4.7
- 4.75
- 4.76
- 4.8
- 4.83
- 4.85
- 4.9
- 4.92
- 4.95
- 4.98
- 5
- 5.05
- 5.06
- 5.1
- 5.11
- 5.15
- 5.16
- 5.18
- 5.2
- 5.22
- 5.25
- 5.3
- 5.31
- 5.35
- 5.4
- 5.41
- 5.45
- 5.5
- 5.55
- 5.56
- 5.6
- 5.61
- 5.65
- 5.7
- 5.75
- 5.79
- 5.8
- 5.85
- 5.9
- 5.94
- 5.95
- 6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.37
- 6.4
- 6.5
- 6.53
- 6.6
- 6.60 / 8.90
- 6.63
- 6.7
- 6.75
- 6.75 / 9.10
- 6.76
- 6.8
- 6.85
- 6.85 / 9.20
- 6.9
- 6.90 / 9.30
- 6.91
- 7
- 7.00 / 9.50
- 7.04
- 7.1
- 7.14
- 7.2
- 7.25
- 7.25 / 9.80
- 7.3
- 7.30 / 9.80
- 7.37
- 7.4
- 7.40 / 9.80
- 7.45
- 7.49
- 7.5
- 7.54
- 7.6
- 7.67
- 7.7
- 7.8
- 7.9
- 7.94
- 7.96
- 8
- 8.03
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.33
- 8.4
- 8.43
- 8.5
- 8.55
- 8.6
- 8.7
- 8.73
- 8.8
- 8.84
- 8.9
- 9
- 9.1
- 9.13
- 9.2
- 9.3
- 9.35
- 9.4
- 9.5
- 9.52
- 9.53
- 9.55
- 9.6
- 9.7
- 9.8
- 9.9
- 9.92
- 10
- 10.05
- 10.1
- 10.2
- 10.25
- 10.26
- 10.3
- 10.32
- 10.4
- 10.5
- 10.6
- 10.7
- 10.71
- 10.72
- 10.75
- 10.8
- 10.9
- 11
- 11.1
- 11.11
- 11.12
- 11.14
- 11.2
- 11.3
- 11.4
- 11.5
- 11.51
- 11.6
- 11.7
- 11.8
- 11.9
- 11.91
- 12
- 12.05
- 12.1
- 12.2
- 12.25
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
- 13
- 13.1
- 13.25
- 13.4
- 13.49
- 13.5
- 13.65
- 13.7
- 13.75
- 13.8
- 13.89
- 14
- 14.1
- 14.2
- 14.25
- 14.29
- 14.3
- 14.5
- 14.6
- 14.68
- 14.69
- 14.7
- 14.75
- 14.8
- 15
- 15.08
- 15.1
- 15.25
- 15.3
- 15.5
- 15.6
- 15.7
- 15.8
- 15.87
- 15.88
- 16
- 16.1
- 16.27
- 16.5
- 16.67
- 16.8
- 17
- 17.07
- 17.46
- 17.5
- 17.8
- 17.86
- 18
- 18.26
- 18.5
- 18.65
- 18.8
- 19
- 19.05
- 19.25
- 19.5
- 19.8
- 20
Groove Length L (mm)
- 2
- 3
- 5
- 6
- 10
- 12
- 15
- 20
- 21
- 25
- 26
- 29
- 30
- 31
- 32
- 35
- 36
- 40
- 45
- 47
- 48
- 50
- 60
- 65
- 72
work material
Tool Material Type
- Carbide
Overall Length L (mm)
- 40
- 50
- 58
- 60
- 62
- 66
- 70
- 72
- 73
- 74
- 75
- 77
- 78.994
- 79
- 80
- 81
- 82
- 84
- 85
- 86
- 87
- 89
- 89.992
- 90
- 91
- 93
- 94
- 96
- 97
- 99
- 101
- 102
- 103
- 103.988
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 118
- 121
- 122
- 123
- 124
- 125.984
- 128
- 129
- 131
- 132
- 133
- 134
- 135
- 136
- 139
- 141
- 142
- 143
- 145
- 146
- 147
- 150
- 151.994
- 152
- 152.4
- 153
- 156
- 157
- 158
- 159
- 161
- 163
- 164
- 168
- 170
- 171
- 173
- 174
- 175
- 177
- 179.984
- 180
- 182
- 185
- 186
- 188
- 190
- 191
- 192
- 197
- 198
- 199
- 201.981
- 203
- 204
- 205
- 206
- 207
- 212
- 213
- 214
- 223
- 225
- 226
- 226.974
- 227
- 228
- 232
- 233
- 234
- 240
- 241
- 245.974
- 245.999
- 250
- 252
- 253
- 256
- 257
- 258
- 259
- 264
- 265
- 268
- 268.986
- 273
- 276
- 278
- 289
- 295
- 304
- 306
- 307
- 310
- 318
- 330
- 349
Shank Type
- End Mill Shank
- Straight Shank
Coating Y/N
- Available
- N/A
Coating Type
With/without Oil Hole
- Available
- N/A
Fabricante

Step Drills (Carbide)

16 artículos

* Información sobre días de envío, gastos de envío y precios

Lista

Foto

Comparar especificaciones

Número de artículos que mostrar:Ordenar según:

Fecha de envío:

SANDVIK
SANDVIK CoroDrill 861 Solid Carbide Drill
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
3 ～ 20 - General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] - 62 ～ 349 - - - -
Precio (IVA no incluido) a partir de:
197.31 €
Fecha de envío normal:
5 días laborables
Configurar
Volume Discount
MISUMI
TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade
(DLC-SC-SDR)-Drilling and countersinking holes for screws can be done in one operation, resulting in highly efficient machining (countersink type)-Since relief holes can be drilled at the same time as drilling pilot holes for power strips, it is ideal for drilling pilot holes in thick panels that require relief (single-cut type).
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
3.4 ～ 10.3 21 ～ 72 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide 73 ～ 136 Straight Shank Available TiAlN N/A
Precio (IVA no incluido) a partir de:
81.59 €
Fecha de envío normal:
5 días laborables
Configurar
SANDVIK
SANDVIK CoroDrill 860 Solid Carbide Drill
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
3 ～ 20 - General Steel[○] / Stainless Steel[○] / Aluminum[○] - 62 ～ 257 - - - -
Precio (IVA no incluido) a partir de:
128.77 €
Fecha de envío normal:
5 días laborables
Configurar
Volume Discount
MISUMI
DLC Coated Carbide Stepped Drill for Aluminium Machining, Stub
[Features]-Excellent chip evacuation and sharpness due to high spiral shape-Designed for frequent pre-drilling of M4 to M12 metric coarse holes-2 types of step angles are available for chamfering and cutting-Reduces chamfering process and achieves high drilling efficiency. (DLC-SC-SDR)-Relief holes can be machined simultaneously when drilling pilot holes for bolts (DLC-SF-SDR).
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
6.8 ～ 10.3 48 ～ 72 Cast Iron[○] / Aluminum[◎] / Copper[○] Carbide 104 ～ 136 Straight Shank Available DLC N/A
Precio (IVA no incluido) a partir de:
97.95 €
Fecha de envío normal:
5 días laborables
Configurar
MISUMI
Carbide Step Drill Bit, With Custom Dimensions / Long Shank Type
[Features]・Introducing a long shank type with custom pilot diameter / large diameter dimensions to the lineup of customizable step drill bits with helical flutes.
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
- - General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide - End Mill Shank N/A - N/A
Fecha de envío normal:
9 días laborables
Configurar
Volume Discount
SANDVIK
CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill
[Features]General Purpose High Performance Carbide Solid Drill· Coolant Through
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
3.35 ～ 6.9 - General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Carbide 142 End Mill Shank Available Other Available
Precio (IVA no incluido) a partir de:
135.06 €
Fecha de envío normal:
6 días laborables
Configurar
SANDVIK
SANDVIK CoroDrill 460 Solid Carbide Step and Chamfer Drill
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
5 ～ 14 - General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] - - - - - -
Precio (IVA no incluido) a partir de:
108.83 €
Fecha de envío normal:
5 días laborables
Configurar
SANDVIK
SANDVIK CoroDrill 863 Solid Carbide Drill
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
4.83 ～ 11.14 - Stainless Steel[○] / Aluminum[○] / Titanium[○] - 58 ～ 152.4 - - - -
Precio (IVA no incluido) a partir de:
260.15 €
Fecha de envío normal:
5 días laborables
Configurar
MISUMI
Carbide Burnishing Drill, Stepped Model
[Features] -No complicated estimations required. It is possible to order the part number of the step drill without drawings.
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
- - Cast Iron[○] / Aluminum[◎] / Copper[○] Carbide 40 ～ 60 End Mill Shank N/A - N/A
Fecha de envío normal:
8 días laborables
Configurar
MISUMI
Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model
[Features] -No complicated estimates required. It is possible to order the part number of the step drill without drawings.
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
- - General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide - Straight Shank N/A - N/A
Fecha de envío normal:
12 días laborables
Configurar
MISUMI
Carbide Burnishing Drill Bit, Long Shank Type
[Features]・Ideal for step drilling aluminum.・Long shank types are now available.
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
- - Cast Iron[○] / Aluminum[○] / Copper[○] Carbide - End Mill Shank N/A - N/A
Fecha de envío normal:
8 días laborables
Configurar
MISUMI
Carbide Step Drill Bit, With Custom Dimensions
[Features]・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
- - General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Carbide - End Mill Shank N/A - N/A
Fecha de envío normal:
9 días laborables
Configurar
KYOWA SEIKO
Carbide Drill with Step and 90° Chamfering Blade KDD-2
Both tip diameter and large diameter have torsional angle of 30°. Lineup of tip diameters from φ0.5 to φ6 in 0.05 increments.
Más información
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
0.5 ～ 6 2 ～ 25 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] - 50 ～ 80 End Mill Shank N/A - N/A
Precio (IVA no incluido) a partir de:
88.28 €
Fecha de envío normal:
6 días laborables
Configurar
SANDVIK
SANDVIK CoroDrill Delta-C Solid Carbide Step and Chamfer Drill
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
6.60 / 8.90 ～ 7.40 / 9.80 - - - - - - - -
Precio (IVA no incluido) a partir de:
255.15 €
Fecha de envío normal:
5 días laborables
Configurar
SANDVIK
SANDVIK CoroDrill 460 Solid Carbide Drill
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
3 ～ 20 - General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] - 62 ～ 268.986 - - - -
Precio (IVA no incluido) a partir de:
41.91 €
Fecha de envío normal:
5 días laborables
Configurar
SANDVIK
SANDVIK CoroDrill 862 Solid Carbide Drill
Hole diameter (drill diameter) D (mm) Groove Length L (mm) work material Tool Material Type Overall Length L (mm) Shank Type Coating Y/N Coating Type With/without Oil Hole
2 ～ 2.8 - - - 72 ～ 80 - - - -
Precio (IVA no incluido) a partir de:
242.62 €
Fecha de envío normal:
5 días laborables
Configurar

Step Drills (Carbide)

Categorías relacionadas con Step Drills (Carbide)