Spiral Taps (Screw size (Nominal): M8)

• 

  • DESCUENTO
  • Volume Discount

  OSG

  A Tap Series, Spiral Tap, A-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	1.5P ～ 2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  20.88 €～

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount
  • Stock

  OSG

  Spiral Tap Series, General Purpose EX-SFT

  Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.5 ～ 1.25	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  11.49 €～

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  Artículo en stock - 1 día laborable

  Algunos artículos se pueden enviar el mismo día

  Configurar
• 

  • Volume Discount

  REX TOOLS

  Thread repair kit

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M5 ～ M12	-	-	-	-	-	-	-

  Precio normal (IVA no incluidos):

  32.29 €～

  Fecha de envío normal:

  3 días laborables

  Configurar
• 

  SANDVIK

  SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	-	-	-	-	-	-	-

  Precio normal (IVA no incluidos):

  22.09 €～

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  NACHI(FUJIKOSHI)

  SG Spiral Tap SGSP

  [Features] -Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75	2.5	Alloy HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Spiral Tap	For through hole / For blind hole	Available

  Precio normal (IVA no incluidos):

  53.56 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  REX TOOLS

  Tap tool kit

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M3 ～ M14	-	-	-	-	-	-	-

  Precio normal (IVA no incluidos):

  74.28 €～

  Fecha de envío normal:

  3 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless EX-SUS-SFT

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2.5P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  12.82 €～

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	3P	Vanadium High-Speed Steel	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  32.00 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  OSG

  A Tap Series, Spiral Tap, Long Shank A-LT-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  29.12 €～

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  WERA

  Tapping head

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	-	-	-	-	-	-	-

  Precio normal (IVA no incluidos):

  11.71 €

  Fecha de envío normal:

  4 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  MISUMI

  MT Series High-Speed Steel Spiral Tap

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2.5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  11.92 €～

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  OSG

  Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

  Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	1.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  12.45 €～

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  Artículo en stock - 1 día laborable

  Algunos artículos se pueden enviar el mismo día

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  OSG

  Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

  Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	3P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  18.56 €

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  Artículo en stock - 1 día laborable

  Posible envío el mismo día

  Configurar
• 

  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Titanium Alloy ZET-B

  A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	3P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  32.09 €

  Fecha de envío normal:

  8 días laborables

  Configurar
• 

  YAMAWA MFG

  Spiral Tap for Through Holes for High Speed F-SL

  Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to Occur

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For through hole	Available

  Precio normal (IVA no incluidos):

  53.47 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Hard-to-Cut Stainless Steel SU2-SP

  Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	3P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  18.71 €

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  8 días laborables

  Configurar
• 

  • Volume Discount

  REX TOOLS

  Die tool kit

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M3 ～ M12	-	-	-	-	-	-	-

  Precio normal (IVA no incluidos):

  34.44 €

  Fecha de envío normal:

  3 días laborables

  Configurar
• 

  • Volume Discount

  REX TOOLS

  Hand tap set

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M8	-	-	-	-	-	-	-

  Precio normal (IVA no incluidos):

  13.83 €

  Fecha de envío normal:

  3 días laborables

  Configurar
• 

  • Volume Discount

  FEIN

  Tap insert

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M8	-	-	-	-	-	-	-

  Precio normal (IVA no incluidos):

  96.12 €～

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  SANDVIK

  SANDVIK CoroTap 200 Cutting Tap with Spiral Point

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	-	-	-	-	-	-	-

  Precio normal (IVA no incluidos):

  23.60 €～

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount

  MISUMI

  Carbide Spiral Tap

  [Features] -Carbide tap with uncoated spiral flute-Can be used for machining blind holes-Suitable for mass production of aluminium and copper alloys

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	1.5 P ～ 2.5 P	Carbide	Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  66.03 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount

  MISUMI

  Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 piezas】

  [Features] -Multi-use tap for all materials from general steel, heat treated steel to stainless steel-Efficient chip removal due to short thread form and special flute shape.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5 P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  88.24 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount

  MISUMI

  TiN Coated High-Speed Steel Spiral Tap【1 a 5 piezas】

  The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	1.5 P ～ 2.5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  29.24 €～

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  • Volume Discount

  MISUMI

  High-Speed Steel Spiral Tap【10 piezas】

  [Features] -High speed uncoated steel tap with spiral flutes-Suitable for machining blind holes-Effective for materials with continuous chips such as carbon steel and steel alloys.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  110.78 €

  Fecha de envío normal:

  5 días laborables

  Configurar
• 

  NACHI(FUJIKOSHI)

  G Spiral Tap for Deep Holes in Stainless Steel GSPS

  Suited for stainless steel and materials that produce a lot of swarf.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Alloy HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  34.33 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  OSG

  Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT

  Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Powder high-speed steel	Nickel-based alloy (Inconel, etc.)[◎]	Spiral Tap	For through hole	Available

  Precio normal (IVA no incluidos):

  28.66 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

  Allows internal threading of stainless steel with a water soluble cutting fluid.Tool material: Vanadium high speed steelHole type: For blind holesMaterial: General steel/stainless steel.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  22.97 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Tin Coated, TIN-SFT

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  20.88 €～

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT

  The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  27.73 €～

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  OSG

  Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

  Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.Tool material: Powder metal high-speed steelThread type: MetricHole type: For blind holesMaterial: General steel / heat-treated steelCoating: Surface treatment for steel.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  23.17 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  OSG

  Spiral Tap Series, V Coated, V-SFT

  Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  30.00 €

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  Artículo en stock - 1 día laborable

  Posible envío el mismo día

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Aluminum, EX-AL-SFT

  Suitable for tapping blind hole of nonferrous metal such as aluminum and its alloys, and die-cast

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1	2.5P	Vanadium High-Speed Steel	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  15.96 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  17.52 €～

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  OSG

  Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

  Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  17.52 €～

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  OSG

  Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT

  Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	3P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  32.98 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  OSG

  Spiral Tap Series, Carbide Spiral Tap OT-SFT

  Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machine

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	1.5P ～ 2.5P	Carbide	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  87.75 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  OSG

  Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT

  Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  11.64 €

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Stainless Steel SU+SP / SU-SP

  Spiral tap for blind hole machining with extremely viscous or work-hardened work material.[Features]· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.· Stable scrap is ejected and a good finish is realized.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]Optimal for machining extremely viscous or work-hardened work material.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	2.5P	High-speed steel	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless Steel (JIS-SUS)[○/◎]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  20.56 €～

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  YAMAWA MFG

  Spiral Flute Tap SP (N-SP)

  The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.[Features]・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.・ Intermittent cutting of female threads with keyway is also possible.・ Capable of machining both synchronously and asynchronously.・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.・ The tap can easily cut.・ Intermittent cutting of pilot holes with keyway is also possible.・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.[Applications]・ Ideal for machining blind holes.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.5	2.5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  22.99 €

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  Artículo en stock - 1 día laborable

  Posible envío el mismo día

  Configurar
• 

  • DESCUENTO
  • Volume Discount

  YAMAWA MFG

  Titanium Coated Through Hole Spiral Tap AU+SL

  Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1	5P	High-speed steel	-	Spiral Tap	For through hole	Available

  Precio normal (IVA no incluidos):

  33.07 €

  Precio normal (IVA no incluidos):

  Precio especial

  Fecha de envío normal:

  8 días laborables

  Configurar
• 

  • Volume Discount

  YAMAWA MFG

  Spiral Tap for Nickel Base Alloy ZEN-B

  A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	3P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  37.13 €

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  YAMAWA MFG

  Coating Spiral Tap AU+ SP

  Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2.5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Precio normal (IVA no incluidos):

  33.07 €～

  Fecha de envío normal:

  6 días laborables

  Configurar
• 

  • Volume Discount

  YAMAWA MFG

  Long Shank Spiral Tap LS-SP(LS-N-SP)

  * LS-N-SP will switch to LS-SP as soon as the stock runs out.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2.5P	High-speed steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  25.00 €～

  Fecha de envío normal:

  8 días laborables

  Configurar
• 

  • Volume Discount

  YAMAWA MFG

  Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX

  Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  17.29 €

  Fecha de envío normal:

  8 días laborables

  Configurar
• 

  • Volume Discount

  YAMAWA MFG

  Short Spiral Tap for Deep Holes S-SP

  Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

  Más información

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Spiral Tap	For blind hole	N/A

  Precio normal (IVA no incluidos):

  22.42 €～

  Fecha de envío normal:

  6 días laborables

  Configurar