Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading (mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M1 ～ M45	0.2 ～ 4.5	2P ～ 4P	Powder high-speed steel / Vanadium High-Speed Steel	Quenched and tempered steel (35 to 45 HRC)[◎]	Roll tap	For through hole / For blind hole	Available

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading (mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter / Unified	M1 ～ M12	0.25 ～ 56	2P ～ 4P	Powder high-speed steel	Quenched and tempered steel (35 to 45 HRC)[○]	Roll tap	For blind hole	Available

¡Estamos traduciendo nuestra tienda online al español!  
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Página principal de MISUMI
Machining tools
Screw-Hole-Related Tools
Roll Taps
work material:Quenched and tempered steel (35 to 45 HRC)

Categoría

Condiciones del filtro

Despejar todo

Stock
Mostrar sólo artículos en stock

Screw Types

Meter
Unified

Screw size (Nominal)

M1
M1.2
M1.4
M1.6
M1.7
M2
No2UN
M2.3
M2.5
M2.6
M3
M3.5
M4
No4UN
M5
M6
No6UN
M8
M10
M12
M14
M16
M18
M20
M22
M24
M27
M30
M33
M36
M42
M45

Pitch (P), Number of Threading (mm)

0.2
0.25
0.3
0.35
0.4
0.45
0.5
0.6
0.7
0.8
1
1.25
1.5
1.75
2
2.5
3
3.5
4
4.5
32
40
56

Chamfer threads (Lcf)

Tool Material Type

Powder high-speed steel
Vanadium High-Speed Steel

work material

Quenched and tempered steel (35 to 45 HRC)

Tap Type

Roll tap

Hole type

For through hole
For blind hole

Coating Y/N

Available

Coating Type

TiCN

Overall Length (L) (mm)

Fabricante

OSG (2)

Roll Taps (work material: Quenched and tempered steel (35 to 45 HRC))

A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.

2 artículos

* Información sobre días de envío, gastos de envío y precios

Lista

Foto

Comparar especificaciones

Número de artículos que mostrar:Ordenar según:

Fecha de envío:

DESCUENTO
Volume Discount
OSG
Groove-Free Tap Series X Performer S-XPF
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts * M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.
Más información
Screw Types Screw size (Nominal) Pitch (P), Number of Threading (mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M1 ～ M45 0.2 ～ 4.5 2P ～ 4P Powder high-speed steel / Vanadium High-Speed Steel Quenched and tempered steel (35 to 45 HRC)[◎] Roll tap For through hole / For blind hole Available
Precio (IVA no incluido) a partir de:
19.66 €
Precio especial
Fecha de envío normal:
Artículo en stock: 1 día laborable
Algunos artículos se pueden enviar el mismo día
Configurar
Volume Discount
OSG
Groove-Free Tap Series VP New Roll VP-NRT
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
Más información
Screw Types Screw size (Nominal) Pitch (P), Number of Threading (mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter / Unified M1 ～ M12 0.25 ～ 56 2P ～ 4P Powder high-speed steel Quenched and tempered steel (35 to 45 HRC)[○] Roll tap For blind hole Available
Fecha de envío normal:
6 días laborables
Configurar