¡Estamos traduciendo nuestra tienda online al español!
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.
Chamfering / Centering Tools (página 3)
Chamfering/countersinking tools are tools used for grinding center holes, positioning holes, grinding holes, or deburring and rounding the edges after side-surface machining. They are attached to machine tools such as drill press, lathe, machining center, etc. Center drills are used to position the initial indentation on the work material to avoid misalignment of the drill bit tip. Their materials include alloy carbide, powdered high-speed steel, cobalt high-speed steel and high-speed steel. Countersinking and chamfering cutters are capable of chamfering after drilling holes. Chamfering cutters with a hole on the tip allow for smooth cutting discharge on soft work materials such as copper and aluminum. Center drills have a 90° tip angle and they can be used for positioning and chamfering at the same time.
419 artículos
* Información sobre días de envío, gastos de envío y precios
- Volume Discount
MISUMI
High-Speed Steel Center Drill, Long / New JIS, Model A
Necessity in PositioningMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) - 1 ～ 5 General Steel[○] Double-edged N/A High-speed steel N/A - ConfigurarPrecio (IVA no incluido) a partir de:14.69 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model
Ideal for the hole chamfering of countersunk bolts with 90° chamfer.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer - 6.3 ～ 20.5 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade N/A Cobalt HSS Available TiAlN ConfigurarPrecio (IVA no incluido) a partir de:23.51 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TiAlN Coated High-Speed Steel Countersink, 1-Flute / 90°
1-flute type with high versatility in countersinkMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer - 10 ～ 25 General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade N/A Cobalt HSS Available TiAlN ConfigurarPrecio (IVA no incluido) a partir de:27.92 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
TiAlN Coated High-Speed Steel Countersink, with Holes / 90°
It is effective in hole chamfering and deburring of light metals.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer - 10 ～ 25 General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] Single blade N/A Cobalt HSS Available TiAlN ConfigurarPrecio (IVA no incluido) a partir de:27.20 €Fecha de envío normal:5 días laborables
MISUMI
High-Speed Steel Center Drill, 90° Chamfered Blade Model
Frequently used standard sizes are offered at affordable pricesMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) - 1 ～ 5 General Steel[○] Double-edged N/A High-speed steel N/A - ConfigurarPrecio (IVA no incluido) a partir de:7.62 €Fecha de envío normal:5 días laborables
MISUMI
TiN-Coated High-Speed Steel Countersink, with Holes / 90°
Frequently used standard sizes are offered at affordable pricesMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer - 10 ～ 35 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade N/A Cobalt HSS Available TiN ConfigurarPrecio (IVA no incluido) a partir de:26.90 €Fecha de envío normal:5 días laborables
MISUMI
TiN-Coated High-Speed Steel Center Drill, Regular Model
Frequently used standard sizes are offered at affordable pricesMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) - 1 ～ 4 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Double-edged N/A High-speed steel Available TiN ConfigurarPrecio (IVA no incluido) a partir de:10.00 €Fecha de envío normal:5 días laborables
MISUMI
TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set
Frequently used standard sizes are offered in a set at an affordable priceMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer - 6.3/8.3/10.4/12.4/16.5/20.5 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade N/A High-speed steel Available TiN ConfigurarPrecio (IVA no incluido) a partir de:96.92 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
[Features]・MISUMI's original inner radius cutter specialized for machining high hardness steel.・Ideal for high hardness steel inner radius machining up to 65 HRC.・High-efficiency machining is possible by adopting a 4-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Round Chamfer - - General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎] Single blade N/A Carbide Available AlCrN ConfigurarPrecio (IVA no incluido) a partir de:71.31 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
[Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal - - General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade Available Carbide Available AlCrN ConfigurarPrecio (IVA no incluido) a partir de:41.90 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
[Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal - - General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade Available Carbide Available AlCrN ConfigurarPrecio (IVA no incluido) a partir de:34.92 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
[Features]・Machining from positioning to chamfering with a single tool.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal - - General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade N/A Carbide Available AlCrN ConfigurarPrecio (IVA no incluido) a partir de:41.67 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
XAL Series Carbide Chamfer End Mill 2-Flute
[Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal - - General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade N/A Carbide Available AlCrN ConfigurarPrecio (IVA no incluido) a partir de:32.62 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
[Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove - - General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade Available Carbide Available AlCrN ConfigurarPrecio (IVA no incluido) a partir de:43.97 €Fecha de envío normal:5 días laborables
- Volume Discount
MISUMI
XAL Series Carbide Inner Radius Cutter, 2-Flute
[Features]・An essential item for corner rounding.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type - - - General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Single blade N/A Carbide Available AlCrN ConfigurarPrecio (IVA no incluido) a partir de:48.10 €Fecha de envío normal:5 días laborables
- Volume Discount
OSG
TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDSMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer 60 ～ 120 3 ～ 25 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] Single blade N/A High-speed steel Available TiN ConfigurarPrecio (IVA no incluido) a partir de:21.10 €Fecha de envío normal:6 días laborables
OSG
V coating enables longer lasting life than TIN-NC-LDSMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer 90 3 ～ 25 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] Single blade N/A Powder high-speed steel Available TiCN ConfigurarPrecio (IVA no incluido) a partir de:17.24 €Fecha de envío normal:6 días laborables
OSG
90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer 90 16 ～ 25 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] Single blade N/A Carbide Available TiAlN ConfigurarPrecio (IVA no incluido) a partir de:357.80 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
2-Flute Spiral Chamfering Cutter FX-SCC
By adopting of sharp high helix, clean working surface with less burr can be obtained.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 90 0.8 ～ 1 Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] Single blade N/A Carbide Available TiAlN ConfigurarPrecio (IVA no incluido) a partir de:88.29 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
2-Flute Spiral Chamfering Cutter (for Steel / Aluminium Alloy) CA-SCC
By adopting of sharp high helix, clean working surface with less burr can be obtained.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 90 0.8 ～ 1 Aluminum[◎] / Copper[◎] / Resin[○] Single blade N/A Carbide N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:81.19 €Fecha de envío normal:6 días laborables
OSG
2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC
Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 90 0.8 ～ 1 Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] Single blade N/A Carbide Available TiAlN ConfigurarPrecio (IVA no incluido) a partir de:84.50 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminium) CA-LS-SCC
Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 90 0.8 ～ 1 Aluminum[◎] / Copper[◎] / Resin[○] Single blade N/A Carbide N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:87.63 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
3-Flute, Chamfering Cutter (Negative Type) HSCT-N
End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 90 1 ～ 2 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] Single blade N/A Carbide N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:73.17 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
3-Flute, Chamfering Cutter (Positive Type) HSCT-P
End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 90 1 ～ 2 General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] Single blade N/A Carbide N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:73.51 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N
End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 90 1 ～ 2 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] Single blade N/A Carbide N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:78.36 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P
Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 90 1 ～ 2 General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] Single blade N/A Carbide N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:78.36 €Fecha de envío normal:6 días laborables
UNION TOOL
Spiral Chamfering Cutter for SV Chamfering Process
[Features]· Carbide spiral chamfering cutter· Half Taper Angle of 45°· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer / Chamfering/Horizontal / Round Chamfer 90 0.8 ～ 1 General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○] Single blade N/A Carbide N/A - ConfigurarPrecio (IVA no incluido) a partir de:135.77 €Fecha de envío normal:7 días laborables
- Volume Discount
OSG
High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters
By adopting of sharp high helix, clean working surface with less burr can be obtained.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal - - General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] Single blade N/A Powder high-speed steel Available TiCN ConfigurarPrecio (IVA no incluido) a partir de:44.76 €Fecha de envío normal:6 días laborables
OSG
High Speed Chamfering Series, V-Coated XPM 3-Flute Corner Rounding
V coating applied powder high speed XPM corner rounding cutter.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Round Chamfer - 3 ～ 10 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] Single blade Available Powder high-speed steel Available TiCN ConfigurarPrecio (IVA no incluido) a partir de:63.08 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series
Compared to conventional products, high-speed cutting is possible and a wide range of operations such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High speed steel and carbide series are available.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove 60 1 ～ 3.8 General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] Single blade N/A Carbide Available TiAlN ConfigurarPrecio (IVA no incluido) a partir de:119.56 €Fecha de envío normal:6 días laborables
- Volume Discount
OSG
V-UCS Hole Chamfering, Countersink, V Coating
Compared to conventional products, high-speed cutting is possible and a wide range of machining such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer 60 ～ 120 4.3 ～ 37 General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] Single blade Available High-speed steel Available Other ConfigurarPrecio (IVA no incluido) a partir de:25.02 €Fecha de envío normal:6 días laborables
OSG
Hole Chamfering Leading Drill V Coating Powder HSS Long Shank
Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Hole Chamfer 90 3 ～ 25 General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Single blade Available Powder high-speed steel Available TiCN ConfigurarPrecio (IVA no incluido) a partir de:23.64 €Fecha de envío normal:6 días laborables
- DESCUENTO
- Volume Discount
ILIX
Straight Shank, Countersink, HSS, TiAlN Coating 90°
Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work. For SUS and difficult-to-cut material.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer 90 6.3 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎] / Copper[○] / Resin[○] Single blade Available High-speed steel Available TiAlN ConfigurarPrecio (IVA no incluido) a partir de:39.76 €Precio especialFecha de envío normal:Artículo en stock: 1 día laborablePosible envío el mismo día
ILIX
Counter Sink Set Non-Cut 6-Piece【6 piezas】
Suitable for chamfering, countersinking, and deburring. Housed in a metal case to select the size commonly used. Comes with a handle which enables manual operations.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer 90 6.3,8.3,10.4,12.4,16.5,20.5 General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] Single blade Available High-speed steel N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:244.03 €Fecha de envío normal:6 días laborables
- Volume Discount
FUKUDA
Round chamfering end mill.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Round Chamfer - - General Steel[○] / Cast Iron[○] / Resin[○] Single blade N/A High-speed steel N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:97.85 €Fecha de envío normal:6 días laborables
- DESCUENTO
- Volume Discount
FUKUDA
Chatterless Chamfer Milling Machine
6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.[Features]· Chamfering.· Drilling machines, milling machines, machining centers.· Horizontal MillingMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer / Chamfering/Horizontal 60 ～ 120 - General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] Single blade N/A Cobalt HSS N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:41.32 €Precio especialFecha de envío normal:Artículo en stock: 1 día laborableAlgunos artículos se pueden enviar el mismo día
FUKUDA
A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.Más informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Hole Chamfer 60 ～ 90 - General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] Single blade N/A High-speed steel N/A Non-Coated ConfigurarPrecio (IVA no incluido) a partir de:239.54 €Fecha de envío normal:6 días laborables
EIKOSHA
Carbide Centering Tool, Short Type
Centering, countersink, inner and outer chamferingMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Chamfering/Horizontal 90 ～ 118 12 ～ 50 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] - - Carbide - - ConfigurarPrecio (IVA no incluido) a partir de:169.03 €Fecha de envío normal:6 días laborables
EIKOSHA
Carbide Centering Tool, Long Type
Centering, countersink, inner and outer chamfering, long shankMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Chamfering/Horizontal 90 ～ 118 12 ～ 50 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] - - Carbide - - ConfigurarPrecio (IVA no incluido) a partir de:268.60 €Fecha de envío normal:6 días laborables
EIKOSHA
Carbide Centering Tool, Short Type (Taper Shank)
Centering, countersink, inner and outer chamfering, Morse taper shankMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Chamfering/Horizontal 90 ～ 118 12 ～ 40 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] - - Carbide - - ConfigurarPrecio (IVA no incluido) a partir de:179.58 €Fecha de envío normal:6 días laborables
EIKOSHA
Carbide Centering Tool, Long Type (Taper Shank)
Centering, countersink, inner and outer chamfering, long Morse taper shankMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Chamfering/Horizontal 90 ～ 118 12 ～ 40 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] - - Carbide - - ConfigurarPrecio (IVA no incluido) a partir de:254.99 €Fecha de envío normal:6 días laborables
EIKOSHA
Carbide Mini WR Chamfer Cutter
Front / Back R-ChamferingMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Round Chamfer - 3.8 ～ 13.4 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] - - Carbide - - ConfigurarPrecio (IVA no incluido) a partir de:200.05 €Fecha de envío normal:6 días laborables
EIKOSHA
Carbide Mini WR Chamfer Cutter, Long
Front / Back R-Chamfering, Long PatternMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Round Chamfer - 6.8 ～ 15.4 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] - - Carbide - - ConfigurarPrecio (IVA no incluido) a partir de:261.96 €Fecha de envío normal:6 días laborables
- Volume Discount
EIKOSHA
Chamfering, 1-FluteMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Chamfering/Horizontal 60 6 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] - - High-speed steel - - ConfigurarPrecio (IVA no incluido) a partir de:48.99 €Fecha de envío normal:6 días laborables
EIKOSHA
Centering, countersink, inner and outer chamferingMás informaciónApplication Tip angle (θ) Tool Diameter (D) (mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type Centering (Positioning) / Chamfering/Horizontal 90 ～ 118 10 ～ 32 General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] - - Cobalt HSS - - ConfigurarPrecio (IVA no incluido) a partir de:110.60 €Fecha de envío normal:6 días laborables