Tap Holders（Page 2）

Shipping Days	All 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 14 Days or Less 23 Days or Less 60 Days or Less

?* Information on days to ship and prices

• 

  DAISHOWA SEIKI Auto Tapping Tool B Type

  BIG KAISER

  [Features]
  · Simple, compact and low priced.
  The variation of the depth of the tap can be kept at ±0.15 mm and is ideal for work done with pipe taps and blind-hole tapping.
  A best seller from the Auto Tapper series.

  Select to compare

  Configure now
  Starting from∗ ：	289.16 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Auto Tapper E

  BIG KAISER

  [Features]
  · Smoother Float Function (Axial Direction) and Tapper with Built-in Torque Limiter
  · Most suitable for tapping cycles in machining centers
  · Our Original One-Way Torque Limiter
  · The BIG AUTO TAPPER series uses a unique one-way torque limiter that does not work while in reverse, allowing safe tapping.

  Select to compare

  Configure now
  Starting from∗ ：	241.04 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Tap Collet (for New Baby Chuck)

  BIG KAISER

  [Features]
  · New Baby system with abundant main bodies can be used as a tapper with a floating mechanism.
  · When an ultra-short or long tap is needed, the standard product provides quick support.

  Select to compare

  Configure now
  Starting from∗ ：	97.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Drill Tapper

  BIG KAISER

  Select to compare

  Configure now
  Starting from∗ ：	437.12 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Drill Tapper Standard Set

  BIG KAISER

  [Features]
  · Convenient set for a customer's first introduction to the drill tapper

  Select to compare

  Configure now
  Starting from∗ ：	928.59 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Drill Holder for Drill Tappers

  BIG KAISER

  [Features]
  You can easily replace a drill holder.
  -Minimum order quantity: 1 piece.

  Select to compare

  Configure now
  Starting from∗ ：	93.22 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (BBT Shank)

  BIG KAISER

  [Features]
  · Thrust load caused by synchronization error is reduced to 1/10 to improve thread precision and tap longevity.
  · In addition to various tap sizes, the long tap holder is standardized.

  Select to compare

  Configure now
  Starting from∗ ：	182.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (MGT12)

  BIG KAISER

  [Features]
  · From short to long (150 mm, 200 mm), a wide range of tap holders to deal with workpiece interference flexibly

  Select to compare

  Configure now
  Starting from∗ ：	85.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (MGT20)

  BIG KAISER

  [Features]
  · From short to long (150 mm, 200 mm), a wide range of tap holders to deal with workpiece interference flexibly

  Select to compare

  Configure now
  Starting from∗ ：	105.92 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (MGT6)

  BIG KAISER

  [Features]
  · From short to long (150 mm, 200 mm), a wide range of tap holders to deal with workpiece interference flexibly

  Select to compare

  Configure now
  Starting from∗ ：	88.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (ST Shank)

  BIG KAISER

  [Features]
  · Thrust load caused by synchronization error is reduced to 1/10. Screw accuracy and tap life are improved.
  · In addition to various tap sizes, the long tap holder is also standardized.

  Select to compare

  Configure now
  Starting from∗ ：	160.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (Small Diameter Tap for MGT3)

  BIG KAISER

  [Features]
  · As well as the synchronization error correction mechanism, stable small diameter tap processing is enabled by controlling the dynamic runout accuracy when rotating at high speed

  Select to compare

  Configure now
  Starting from∗ ：	334.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (Small Diameter for MTG3)

  BIG KAISER

  [Features]
  -For small diameter taps.
  -Reduces thrust forces due to synchronisation errors to 1/10 and improves tapping accuracy and tap life.
  -A sufficient flow path for coolant is ensured so that coolant can escape from the slot and grease hole even when using a tap with a grease hole.

  Select to compare

  Configure now
  Starting from∗ ：	290.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (Large Diameter Tap for MGT36)

  BIG KAISER

  [Features]
  · Compensates for axial misalignment due to synchronization error, and dramatically reduces load during machining.
  · Structure smoothly complies even with excessive cutting torque of large diameter taps.

  Select to compare

  Configure now
  Starting from∗ ：	625.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Mega Synchro Tapping Holder (Large Diameter Tap Holder for MGT36)

  BIG KAISER

  [Features]
  · Dual face contact, center-through type

  Select to compare

  Configure now
  Starting from∗ ：	240.00 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  BT Shank Tap Holder

  YUKIWA SEIKO

  Torque control that boasts outstanding durability. Revolutionary. Double Roller Clutch Mechanism

  Select to compare

  Configure now
  Starting from∗ ：	372.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tang Type MT Shank Tap Holder

  YUKIWA SEIKO

  Torque control that boasts outstanding durability. Revolutionary. Double Roller Clutch Mechanism

  Select to compare

  Configure now
  Starting from∗ ：	305.38 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  BT30 Floating Tap Holder

  YUKIWA SEIKO

  [Features]
  · Built-In radial direction float: Has a built-in radial direction float, which means it corrects core misalignment between the spindle and workpiece and is suitable for precision tapping.

  Select to compare

  Configure now
  Starting from∗ ：	450.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Nonstop Chuck Holder

  NIKKEN KOSAKUSHO

  [Features]
  · Chuck holder for the nonstop drill tapping series.

  Select to compare

  Configure now
  Starting from∗ ：	242.51 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  General Purpose Tapper Chuck

  NIKKEN KOSAKUSHO

  [Features]
  · Ideal for mass production of tap work only.
  · Equipped with a safe clutch to eliminate the risk of breaking and provide a long service life.
  · A float mechanism is built into the tap holder itself.
  · Collet Sold Separately

  Select to compare

  Configure now
  Starting from∗ ：	253.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Automatic Sizing Tapper Chuck

  NIKKEN KOSAKUSHO

  [Features]
  · Ideal for gas taps, taps with a base, and lightweight alloys. When the machine forward feed is stopped at a designated point, the tap will continue for the set amount only (4 mm for ZL12 type) before idling.
  · Simply reverse it afterwards to align the tap depth at high precision.

  Select to compare

  Configure now
  Starting from∗ ：	242.71 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Tapper Chuck

  NIKKEN KOSAKUSHO

  [Features]
  · A tapper ideal for interactive machining centers.
  · Enables safe and reliable tapping, with stable torque and slim design that further improve ease of use.
  · Unmanned operation-orientated tap holding system (PAT).
  · No deflection, detachment, or breakage.

  Select to compare

  Configure now
  Starting from∗ ：	251.16 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Tap Holder for Old Type Synchro Device

  NIKKEN KOSAKUSHO

  [Features]
  · Former Synchro Tap Holder type.
  * Once the stock for this product runs out, sales will be discontinued. Thereafter, use the new ZH-C type.
  · Equipped with a small floating mechanism.

  Select to compare

  Configure now
  Starting from∗ ：	263.78 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  MT/JT Shank A Type

  KATO MFG

  [Features]
  · Automatic reverse type for tabletop drilling machines
  · Built-in torque adjustment type safety device
  · Tap can be removed efficiently at twice the speed
  

  Select to compare

  Configure now
  Starting from∗ ：	1,001.83 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  HSK Shank Mega Synchro Tapping Holder (For Small Diameter Taps)

  BIG KAISER

  [Features]
  · Thrust load caused by synchronization error is reduced to 1/10, to improve thread accuracy and tap longevity.

  Select to compare

  Configure now
  Starting from∗ ：	463.00 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  SANDVIK HSK to CoroChuck 970

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	1,501.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SANDVIK BIG-PLUS MAS-BT to CoroChuck 970

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	1,397.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SANDVIK CAT-V to CoroChuck 970

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	1,509.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SANDVIK ISO 7388-1 to CoroChuck 970

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	1,509.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SANDVIK BIG-PLUS ISO to CoroChuck 970

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	1,993.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SANDVIK Weldon to Quick Change Tapping Chuck

  SANDVIK

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  SANDVIK Cylindrical Shank to CoroChuck 970

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	973.38 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SANDVIK BIG-PLUS CAT-V to CoroChuck 970

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	1,734.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Check Master, Inch

  MITUTOYO

  This Check Master allows you to test precision tool and coordinate measuring machines, and offers you the following benefits:
  - You can test the X, Y and Z-coordinate axes of precision tool machines and coordinate measuring machines.
  - It consists of rigidly clamped gauge blocks with a step of 10mm.
  - It is supplied in a fitted wooden case.

  Select to compare

  Configure now
  Starting from∗ ：	3,388.16 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Adaptor,Carbon Fiber

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up.

  Select to compare

  Configure now
  Starting from∗ ：	127.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adaptor, Stainless Steel, Conical Base

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. Stainless steel is the primary material of choice for high-strength precision components.

  Select to compare

  Configure now
  Starting from∗ ：	18.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adaptor, Stainless Steel

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. Stainless steel is the primary material of choice for high-strength precision components.

  Select to compare

  Configure now
  Starting from∗ ：	15.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adaptor, Ceramic

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. The very lightweight and extremely stiff character of ceramic materials and its low thermal expansion, makes it the ideal material. The brittle characteristic can protect probes from the effects of crash.

  Select to compare

  Configure now
  Starting from∗ ：	75.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...