¡Estamos traduciendo nuestra tienda online al español!
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.
ANEX
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) / Torx / Box / Other | No. 00 / No. 0 | 0.9 ~ 2.1 | 10 ~ 24 | Single Item / Set Product | Round | N/A | N/A | N/A |
GEDORE
SL / PH1 PZ / Phillips / SL Plus / Minus Drivers
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
VESSEL
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
VESSEL
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
TRUSCO NAKAYAMA
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | Single Item / Set Product | - | - | - | - |
TRUSCO NAKAYAMA
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) | - | 3 | 30 | Single Item | - | - | - | - |
HAZET
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
WIHA
Screwdriver with SoftFinish® CentroFix Bit Holder, Mechanically Lockable, 1/4"
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
MAEDAKINNZOKU
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) | - | 7.2 | 23 | Single Item | Square | Available | N/A | N/A |
SK 11
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Combination | No. 1 / No. 2 | 4 ~ 6 | - | Set Product | Square | N/A | - | - |
WIHA
Fine Screwdriver Set PicoFinish®, Slotted, Phillips, 7 Pieces
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
HOZAN
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | Single Item | - | - | - | - |
HAZET
Phillips Screwdriver / 802, 810 Series / DIN ISO 8764-1|DIN ISO 8764-2
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | 99 ~ 129 | - | - | - | - | - |
WERA
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | 68 | - | - | - | - | - |
VESSEL
Wood-Compo Tang-Thru Screwdriver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
HOZAN
Ceramic Adjustment Screwdriver Set
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | No. 0 | 1.3 ~ 1.8 | 110 | Set Product | Round | N/A | N/A | N/A |
MAEDAKINNZOKU
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 1 / No. 2 | - | 14 | Single Item | Square | Available | N/A | N/A |
SUNFLAG
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Torx | - | - | - | Set Product | - | N/A | - | - |
TRUSCO NAKAYAMA
Ordinary screwdriver (w/ magnet)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) / Flathead (-) | No. 1 | 8 | 75 ~ 150 | Single Item | Round | Available | N/A | N/A |
PB SWISS TOOLS
Screwdriver with AC / DC Tester (with Pocket Clip)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) | - | 2.5 | 50 | Single Item | Round | N/A | N/A | N/A |
PB SWISS TOOLS
Replacement Strong Screwdriver Set
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Combination | - | 6.5 ~ 13 | - | Set Product | Round | N/A | - | - |
PB SWISS TOOLS
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | Single Item | - | - | - | - |
KTC(KYOTO TOOL)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) | - | 2.5 | 75 | Single Item | Round | N/A | N/A | N/A |
WIHA
Soft Finish® ESD Flathead Screwdriver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) | - | 5.5 | 125 | Single Item | Round | N/A | N/A | N/A |
ENGINEER
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 2 | - | - | Single Item | - | Available | - | - |
ENGINEER
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Combination | - | - | - | Set Product | - | - | - | - |
ESCO
(+)(-) Precision Screwdriver Set EA550SX
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | - | - | - | - | - |
PB SWISS TOOLS
ESD (Electrostatic Discharge) Slotted Screwdriver PB 8100 ESD
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) | - | 4 | - | Single Item | Round | - | N/A | N/A |
PB SWISS TOOLS
Stubby Interchangeable Ratchet Hex Screwdriver Set
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Combination | - | - | - | Set Product | Round | - | - | - |
MAEDAKINNZOKU
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 2 | - | 23 | Single Item | Square | Available | N/A | N/A |
HOZAN
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
- | - | - | - | Single Item | - | - | - | - |
ENGINEER
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) / Combination | No. 00 / No. 0 / No. 1 / No. 2 | 4.5 ~ 6 | - | Set Product | - | Available | - | - |
ENGINEER
Screwdriver for Special Screw and for Pentalobular Screw
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Other | - | - | 100 | Single Item | Round | N/A | N/A | N/A |
ANEX
Slit Power Screwdriver (Electric Type with Magnet)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+) | No. 2 | - | 200 | Single Item | Round | Available | N/A | N/A |
ANEX
Spark Testing Screwdriver (Pencil Type with LED)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Flathead (-) | - | - | - | Single Item | Round | N/A | N/A | N/A |
HIRAI KOGU
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Box | - | - | 125 | Single Item | Round | N/A | N/A | N/A |
SUNFLAG
Offset Ratchet Driver With Forward/Reverse Switch
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | - | 6 | - | Single Item | - | N/A | - | - |
WERA
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Torx | - | - | 130 | Single Item | Round | N/A | N/A | N/A |
PB SWISS TOOLS
Replacement Precision Screwdriver Set
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) / Combination | No. 00 / No. 0 / No. 1 | - | - | Set Product | Round | N/A | - | - |
KTC(KYOTO TOOL)
Gift Screwdriver Set (With Magnet)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | No. 2 | 6 | 100 | Set Product | Round | Available | N/A | N/A |
TRAD
2WAY Ultra Slim Ratchet Screwdriver
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Combination | No. 1 / No. 2 / No. 3 | 6 | - | Set Product | - | N/A | N/A | N/A |
SK 11
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Other | - | - | - | Single Item | Round | N/A | - | - |
SIGNET
Stubby Ratchet Screwdriver 52380
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Phillips (+)/Flathead(-) | No. 2 | 6 | - | Single Item | - | N/A | - | - |
ANEX
Precision Pin Vise (Throughput Type)
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Other | - | - | - | Single Item | Round | - | - | - |
ANEX
Precision Pin Vise (Storable Type) with Drill
Tip standards | Tip size / Phillips (+) | Tip size / flathead (-) blade width (mm) B1 | Shaft length L (mm) | Single Product/Set Classification | Shaft type | Magnet | Shaft through | Bolster |
---|---|---|---|---|---|---|---|---|
Other | - | - | - | Set Product | - | - | - | - |