Torque Screwdrivers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Configure now
Starting from∗ ： 99.68 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Idling Type Preset Type Torque Screwdriver
TOHNICHI MFG
[Features]
· There is no concern about overtorque since it idles when the setting torque is reached.
· The torque is made easily variable using the scale.
[Applications]
· Suitable for all kinds of fastening work, from mass production to service.- Volume Discount
- Stock
Configure nowStarting from∗ ： 111.43 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Dial Type Torque Screwdriver
TOHNICHI MFG
[Features]
· A torque screwdriver ideal for inspecting tightened screws.
· There are scales to left and right for additional tightening and return torque inspection.
· A set needle is equipped as standard, making it easy to read off maximum values.
[Applications]
· For inspection and tightening.- Volume Discount
Configure nowStarting from∗ ： 209.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Interchangeable Blade, TORX PLUS®, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Configure nowStarting from∗ ： 5.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hexalobular Cross Bit
MAEDAKINNZOKU
[Features]
· Hexalobular Plus Bit with a square drive of 6.35 mm.- Volume Discount
Configure nowStarting from∗ ： 15.76 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Bit For Torque Screwdriver
NAKAMURA MFG
[Features]
· A hex bit for the Kanon torque screwdrivers.
· A hex bit for LTDK.- Volume Discount
Configure nowStarting from∗ ： 23.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Direct-Read Type Torque Screwdriver FTD
TOHNICHI MFG
[Features]
· With pre-load function. As it applies torque with adjustment knob near the measurement point in advance, measurement is possible even with a tight rotating angle.
· A torque screwdriver ideal for inspecting tightened screws.
· There are scales to left and right for additional tightening and return torque inspection.
· Can be securely used in the EU region as well. ISO 6789 Type I Class D calibration procedure compliant.
[Applications]
· For inspection and tightening.- Volume Discount
Configure nowStarting from∗ ： 263.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 380.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 13.83 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Torque Screwdriver Set TorqueVario®-S Electric, 0.8-5.0 Nm, Mixed, Variably Adjustable Torque Limit, 14 Pieces in Folding Bag
WIHA
Meets your requirements: Variably adjustable torque covers a wide range of applications.
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Lowers your costs: The correct torque protects you from warranty claims.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: For controlled fastening on live parts up to 1 000 V AC.
Standards: Manufactured acc. to IEC 60900.
The fully certified TorqueVario®-S VDE torque system provides controlled screw tightening combined with safe use for electric installations. The tool set contains an ergonomically shaped torque screwdriver with a built-in numeric scale, 9 slimBits, a bit holder, an adjusting tool and a screwdriver with SoftFinish® electric slimVario bit holder for slimBits. All components are arranged practically in a high-grade, hard-wearing box, where they are easy to identify. The VDE torque screwdriver covers a wide variety of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements. The insulated ClicFix bit holder guarantees a secure hold for 75 mm long slimBits thanks to mechanical blade locking. Both the torque screwdriver and the slimBits undergo an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
For applications in electrics
DIN EN ISO 6789.
Content:
- 1x Torque screwdriver TorqueVario®-S electric variably adjustable torque limit 0.8 - 5 (26626)
- 1x Setting tool for torque screwdriver with long handle 90 mm (26864)
- 1x Screwdriver with bit holder SoftFinish® electric slimVario for slimBits 6.0 mm (34577)
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
- 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
- 1x Folding bag
Configure nowStarting from∗ ： 186.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
![[Torx] Key Wrench (9 Pcs) EA573TV](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007182959_001.jpg?$product_view_b$)
[Torx] Key Wrench (9 Pcs) EA573TV
ESCO
【Product Specifications】
・Size-T8・T9・T10・T15・T20・T25・T27・T30・T40
・Shaft length-76 to 132mm
・With tamper resistant on short shaft side(excluding T8・T9)
・With ball point(excluding T8 to T10)- Volume Discount
Configure nowStarting from∗ ： 141.11 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
MecaTorque Handle for Interchangeable Blades PB 8314 A
PB SWISS TOOLS
[Features]
· Torque handle for Preset MecaTorque PB 215 interchangeable blades
· Without scale (tolerance: ±6%)- Volume Discount
Configure nowStarting from∗ ： 151.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 62.03 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Torque screwdriver set
CIMCO
[Features]
・The torque is adjusted without additional tools and the locking mechanism prevents unintentional adjustmen
・Adjustment steps 0.02 Nm, the torque is read off through transparent scale window
・The torque limiting mechanism takes effect when tightening as well as loosening the screw
・The 2-component handle has a replacement blade holder with locking system, replacement blades generally insulated, with bronzed blade tip
・Screwdriver handle and replacement blades are insulated up to 1,000 V- Volume Discount
Configure nowStarting from∗ ： 208.20 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 104.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 6.76 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Interchangeable Blade, Hexagon, for Torque Screwdriver with Key Handle
WIHA
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Configure nowStarting from∗ ： 4.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Torque Screwdriver with Key Handle TorqueFix® Key, Permanently Pre-Set Torque Limit
WIHA
Application: For controlled fastening with the pre-set torque.
Application: Loosening torque approx. +30% over torque.
Extra: Delivered in practical plastic box.
Extra: Incl. works inspection protocol.
DIN EN ISO 6789.
Configure nowStarting from∗ ： 52.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Interchangeable Blade, Hexagon, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Application: For controlled fastening with the pre-set torque.
Configure nowStarting from∗ ： 4.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Torque Adapter easyTorque Electric, for slimBits and slimVario® Holder in Blister
WIHA
Increases your efficiency: Fully compatible with the Wiha slimBit system.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Configure nowStarting from∗ ： 33.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Interchangeable Blade, TORX® MagicSpring®, for Torque Screwdriver with Long Handle
WIHA
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Increases your efficiency: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.
Application: For controlled fastening with the pre-set torque.
Extra: Very slim blade diameter for hard-to-reach screws.
Configure nowStarting from∗ ： 6.41 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 305.62 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Torque Grip Set TGS20
MAEDAKINNZOKU
A tip mounting wrench for machine tools that enables anyone to easily control the torque by the clicking feel transmitted to the hand.
[Features]
· 2 types of bits are included: T type Torx(R) and Torx(R) Plus.
· Includes an extended bit holder that can be used conveniently for deep work.
[Applications]
· Insert a bit into the T-shaped holder for use.Configure nowStarting from∗ ： 163.19 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 145.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Torque Screwdriver (Torx®)
WERA
Special grip design provides an easy grip and comfortable fit. For inspection and tightening.- Volume Discount
Configure nowStarting from∗ ： 132.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Smarque Smart Torque Handle T/IP Set
PROCHI
Tips can be smartly mounted at a specified torque. Idles when the set torque is reached. Grip is an interchangeable type that helps with storage.Configure nowStarting from∗ ： 116.47 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Signal Type Torque Driver LTD
TOHNICHI MFG
Ideal for assembling sensors and electronic parts- Volume Discount
Configure nowStarting from∗ ： 197.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Driver Digital Torque Set
MAEDAKINNZOKU
[Features]
· Digital torque measuring instrument (driver type) used by inserting the bit into the holder at the tip.
· Equipped with buzzer sound and LED to warn against over-torquing.
· Permissible values in the range of 50 to 95% can be set for the target torque.
· With track mode and peak mode switching function.
· Track mode displays the operational torque value in real time.
· Peak mode displays the maximum operational torque value.
· Supports both left and right rotation direction.
· Compatible with 6.35 mm bit across TONE BT series.
· Comes with a dedicated resin case.
· Calibration certificate included.
[Applications]
· Tightening work with small torque.- Volume Discount
Configure nowStarting from∗ ： 178.25 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Torque Bit Holder (without Scale)
WERA
[Features]
· Special grip design provides an easy grip and comfortable fit.
[Applications]
· General tightening work.Configure nowStarting from∗ ： 231.11 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Bit For Torque Screwdriver
NAKAMURA MFG
A straight-slot bit for torque screwdrivers that allows fine adjustment of tightening torque value.- Volume Discount
Configure nowStarting from∗ ： 8.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bit For Torque Screwdriver
NAKAMURA MFG
[Features]
· A box bit for the Kanon torque screwdrivers.
· A box bit for LTDK/DPSK.- Volume Discount
Configure nowStarting from∗ ： 16.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bit For Torque Screwdriver
NAKAMURA MFG
[Features]
· A box bit for the Kanon torque screwdrivers.
· A box bit for LTDK.- Volume Discount
Configure nowStarting from∗ ： 17.93 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
T Type Hexalobular Bits Set (Tamper-Proof Type)
MAEDAKINNZOKU
[Features]
· T type Hexalobular bits set (tamper-proof type) with a square drive of 6.35 mm.- Volume Discount
Configure nowStarting from∗ ： 45.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
T Type Hexalobular Bits (Tamper-Proof Type)【3 Pieces Per Package】
MAEDAKINNZOKU
[Features]
· T type Hexalobular Bits (tamper-proof type) with a square drive of 6.35 mm.- Volume Discount
Configure nowStarting from∗ ： 11.53 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hexalobular Cross Bit Set
MAEDAKINNZOKU
[Features]
· A set of Hexalobular Cross bits with a square drive of 6.35 mm.- Volume Discount
Configure nowStarting from∗ ： 56.94 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Torx® Driver Craft Form Plus
WERA
[Features]
· Special grip design provides an easy grip and comfortable fit.- Volume Discount
Configure nowStarting from∗ ： 25.21 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Torque Grip
MAEDAKINNZOKU
[Features]
· As one can feel the click when holding, anyone can manage the torque easily.
· Ideal for tip installation and various maintenance.
· Even the tips of the bits are magnetized so that screws can be held easily.- Volume Discount
Configure nowStarting from∗ ： 24.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Kanon Dial Gauge Torque Screwdriver (with Indicator) N-DPSK Type Standard Type
NAKAMURA MFG
[Features]
· Suitable for small capacity general tightening, inspection, and destruction testing. Easy to use and features outstanding readability.
· A low-capacity torque screwdriver. Ideal for general tightening, inspection, and destruction testing.
· One strong point is its user-friendliness. A direct-read type where the twisting of the torsion bar is easily seen with a circular scale.
· Easy to read thanks to a wide scale plate.- Volume Discount
Configure nowStarting from∗ ： 192.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Kanon Dial Gauge Torque Screwdriver (with Indicator) N-DPSK Type Transparent Scale Type
NAKAMURA MFG
[Features]
· Suitable for small capacity general tightening, inspection, and destruction testing. Easy to use and features outstanding readability.
· Because the scale plate is transparent, the tip of the bit is clearly visible, making work easier.
· Each model comes with both a left and right needle holder.
· Each model guarantees accuracy up to ±3%.- Volume Discount
Configure nowStarting from∗ ： 266.23 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Kanon Clutch Release Micro Torque Screwdriver N-MTDK Type
NAKAMURA MFG
[Features]
· Collet chuck type holds the bit firmly. Demonstrates its power in tightening miniature screws.
· Since it idles once the set torque has been attained, anyone at all can screws to the accurate value.
· An ultra-small, idling-type torque screwdriver which can tighten screws on precision equipment, etc., to an exact torque value.
· Collet chuck type holds the bit firmly. Prevents falling and loss of bit.
· It has a slim and lightweight construction that prevents fatigue even in detailed jobs.
· Ideal for assembling small precision equipment such as timepieces, cameras, medical equipment, mobile phones, other mobile equipment, etc.- Volume Discount
Configure nowStarting from∗ ： 367.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![T-Type [Hexalobular] Wrench EA573AT-10](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007175388_002.jpg?$product_view_b$)
T-Type [Hexalobular] Wrench EA573AT-10
ESCO
[Features]
This is a T-shaped handle capable of extracting large torque.
The T-shape makes it easy to grip and easy to use.
2 different handle widths are available.
[Applications]
It is suitable for maintenance of engines, lathes, and various mechanical equipment.- Volume Discount
Configure nowStarting from∗ ： 25.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![T-Type [Hexalobular] Wrench EA573AT-27](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007175423_001.jpg?$product_view_b$)
T-Type [Hexalobular] Wrench EA573AT-27
ESCO
【Product Specifications】
・Material-Blade： Chrome-Vanadium Steel (Chrome Plating)Handle： impact-resistant plastics (cadmium free)
・Dim.…T27
・Shaft length…100mm
・Handle W…100mm- Volume Discount
Configure nowStarting from∗ ： 28.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Long [TORX] Wrench EA573GT-130](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007177380_001.jpg?$product_view_b$)
Long [TORX] Wrench EA573GT-130
ESCO
【Product Specifications】
・Dim.-T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T50
・Maximum axis length-190mm- Volume Discount
Configure nowStarting from∗ ： 116.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Key Wrench Set [TORX] EA573MD-106](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007180238_001.jpg?$product_view_b$)
Key Wrench Set [TORX] EA573MD-106
ESCO
【Product Specifications】
・Max. shaft length-106, 108： 83mm, 110： 107mm
・-106, -108 includes the holder .-110 is stored in the vinyl poach.
・-106-6 pcs set, -108-8 pcs set, -110-10 pcs set
・Dim.…T8, 9, 10, 15, 20, 25- Volume Discount
Configure nowStarting from∗ ： 112.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Key Wrench Set [Hexalobular] EA573MD-108](//uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007180249_002.jpg?$product_view_b$)
Key Wrench Set [Hexalobular] EA573MD-108
ESCO
【Product Specifications】
・Max. shaft length-106, 108： 83mm, 110： 107mm
・-106, -108 includes the holder .-110 is stored in the vinyl poach.
・-106-6 pcs set, -108-8 pcs set, -110-10 pcs set
・Dim.…T6, 7, 8, 9, 10, 15, 20, 25- Volume Discount
Configure nowStarting from∗ ： 143.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
![[Torx] Key Wrench (9 Pcs) EA573TV](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007182959_001.jpg?$product_view_b$)
![T-Type [Hexalobular] Wrench EA573AT-10](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007175388_002.jpg?$product_view_b$)
![T-Type [Hexalobular] Wrench EA573AT-27](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007175423_001.jpg?$product_view_b$)
![Long [TORX] Wrench EA573GT-130](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007177380_001.jpg?$product_view_b$)
![Key Wrench Set [TORX] EA573MD-106](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007180238_001.jpg?$product_view_b$)
![Key Wrench Set [Hexalobular] EA573MD-108](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007180249_002.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Product Type |
| Torque Adjustment Range (cN/m) |
| Tip Type |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| With or without idling function |
| Tip size / flathead (-) blade thickness (mm) B2 |
| Torque Precision (±%) |
| Bit Individual Product, Set Product |
| Minimum gradation (cN·m) |
| Overall length (mm) |
| Load direction |
| Bit Quantity |
| Presence of magnet at the blade tip |
| Tip two-sided width size |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NAKAMURA MFG | TOHNICHI MFG | TOHNICHI MFG | WIHA | MAEDAKINNZOKU | NAKAMURA MFG | TOHNICHI MFG | WERA | GEDORE | WIHA | ESCO | PB SWISS TOOLS | WERA | CIMCO | WERA | KNIPEX | WIHA | WIHA | WIHA | WIHA | WIHA | HALDER | MAEDAKINNZOKU | WERA | WERA | PROCHI | TOHNICHI MFG | MAEDAKINNZOKU | WERA | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | WERA | MAEDAKINNZOKU | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | ESCO | ESCO | ESCO | ESCO | ESCO |
| Product Series | Interchangeable Blade, TORX PLUS®, for Torque Screwdriver with Long Handle | Interchangeable Blade, Hexagon, for Torque Screwdriver with Key Handle | Torque Screwdriver with Key Handle TorqueFix® Key, Permanently Pre-Set Torque Limit | Interchangeable Blade, Hexagon, for Torque Screwdriver with Long Handle | Torque Adapter easyTorque Electric, for slimBits and slimVario® Holder in Blister | Interchangeable Blade, TORX® MagicSpring®, for Torque Screwdriver with Long Handle | T Type Hexalobular Bits (Tamper-Proof Type)【3 Pieces Per Package】 | Kanon Dial Gauge Torque Screwdriver (with Indicator) N-DPSK Type Standard Type | Kanon Dial Gauge Torque Screwdriver (with Indicator) N-DPSK Type Transparent Scale Type | ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 99.68 € *Unit price with basic configuration Volume Discount | 111.43 € *Unit price with basic configuration Volume Discount | 209.32 € *Unit price with basic configuration Volume Discount | 5.07 € *Unit price with basic configuration | 15.76 € *Unit price with basic configuration Volume Discount | 23.48 € *Unit price with basic configuration Volume Discount | 263.99 € *Unit price with basic configuration Volume Discount | 380.28 € *Unit price with basic configuration Volume Discount | 13.83 € *Unit price with basic configuration Volume Discount | 186.03 € *Unit price with basic configuration | 141.11 € *Unit price with basic configuration Volume Discount | 151.17 € *Unit price with basic configuration Volume Discount | 62.03 € *Unit price with basic configuration Volume Discount | 208.20 € *Unit price with basic configuration Volume Discount | 104.96 € *Unit price with basic configuration Volume Discount | 6.76 € *Unit price with basic configuration | 4.53 € *Unit price with basic configuration | 52.97 € *Unit price with basic configuration | 4.96 € *Unit price with basic configuration | 33.60 € *Unit price with basic configuration | 6.41 € *Unit price with basic configuration | 305.62 € *Unit price with basic configuration | 163.19 € *Unit price with basic configuration | 145.95 € *Unit price with basic configuration Volume Discount | 132.28 € *Unit price with basic configuration Volume Discount | 116.47 € Special price *Unit price with basic configuration Promotional pricing | 197.34 € *Unit price with basic configuration Volume Discount | 178.25 € *Unit price with basic configuration Volume Discount | 231.11 € *Unit price with basic configuration | 8.99 € *Unit price with basic configuration Volume Discount | 16.85 € *Unit price with basic configuration Volume Discount | 17.93 € *Unit price with basic configuration Volume Discount | 45.53 € *Unit price with basic configuration Volume Discount | 11.53 € *Unit price with basic configuration Volume Discount | 56.94 € *Unit price with basic configuration Volume Discount | 25.21 € *Unit price with basic configuration Volume Discount | 24.59 € *Unit price with basic configuration Volume Discount | 192.55 € *Unit price with basic configuration Volume Discount | 266.23 € *Unit price with basic configuration Volume Discount | 367.70 € *Unit price with basic configuration Volume Discount | 25.23 € *Unit price with basic configuration Volume Discount | 28.88 € *Unit price with basic configuration Volume Discount | 116.29 € *Unit price with basic configuration Volume Discount | 112.76 € *Unit price with basic configuration Volume Discount | 143.01 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 4 Days | 11 Days | 5 Days | 7 Days | 6 Days | 4 Days | 3 Days | 4 Days | 3 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 3 Days | 9 Days | 6 Days | 6 Days | Same day | 6 Days | 9 Days | 7 Days | 6 Days | 6 Days | 6 Days | 5 Days | 7 Days | 10 Days | 9 Days | 5 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Product Type | Preset | Preset | Dial Type | - | - | - | Dial Type | - | - | - | - | Dial Type | - | - | - | - | - | - | - | - | - | - | Single Function Type | Preset | Preset | Single Function Type | Preset | - | - | - | - | - | - | - | - | - | - | Dial Type | Dial Type | Preset | - | - | - | - | - |
| Torque Adjustment Range (cN/m) | 1~15 ～ 400 to 1000 | 2~15 ～ 100~500 | - | - | - | - | 10–50 ～ 80～400 | - | - | 80-500 | - | 40 to 200 ～ 100~500 | - | - | 30-600 | - | - | 50 ～ 400 | - | - | - | - | 60 ～ 500 | - | - | - | 4 to 30 | 60 to 600 | 300-600 | - | - | - | - | - | - | - | - | 10–50 ～ 100~500 | 20~100 ～ 100~500 | 7.5～20 ～ 30~80 | - | - | - | - | - |
| Tip Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Torx Type (Hexalobular) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip size / Phillips (+) | - | - | - | - | - | - | No. 1 ～ No. 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | - | - | - | - | 7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without idling function | - | Available | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | N/A | N/A | N/A | - | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | 0.7 ～ 0.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Torque Precision (±%) | - | 3 | 3 | - | - | - | 3 | - | - | 6 | - | 6 | - | - | 6 | - | - | 6 | - | - | - | - | 10 ～ 15 | 10 | 10 | 10 | 3 | - | - | - | - | - | - | - | - | - | - | 3 | 3 | 3 | - | - | - | - | - |
| Bit Individual Product, Set Product | - | - | - | - | - | - | - | - | - | - | - | Single Item / Set Product | - | - | - | - | - | - | - | - | - | - | Set Product | - | - | - | Single Item | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Minimum gradation (cN·m) | 0.1 ～ 5 | 0.1 ～ 5 | - | - | - | - | 1 ～ 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 | - | - | - | - | - | - | - | - | - | 2 ～ 20 | 2 ～ 20 | 0.25 ～ 1 | - | - | - | - | - |
| Overall length (mm) | 107 ～ 235 | 100 ～ 155 | 152 ～ 338 | - | 25 | 40 ～ 70 | 215 ～ 263 | - | 215 | - | - | - | 133 ～ 155 | - | 138 | - | - | 68 | - | - | - | 305 | - | 170 | 170 | - | 0.2 | 212 | 150 | 45 | 100 | 70 | 25 | 25 | - | 130 ～ 242 | 64.5 ～ 77.5 | 208 ～ 300 | 222 ～ 300 | 103 | - | - | - | - | - |
| Load direction | - | Right | Left/Right | - | - | - | Left/Right | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Right | Right | Right | - | Right | Left/Right | Right | - | - | - | - | - | - | - | Right | - | - | - | - | - | - | - | - |
| Bit Quantity | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Presence of magnet at the blade tip | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip two-sided width size | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6.35 | - | - | - | - | - | - | - | 4 ～ 10 | 4 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Torx] Key Wrench (9 Pcs) EA573TV](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007182959_001.jpg?$product_view_c$)
![T-Type [Hexalobular] Wrench EA573AT-10](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007175388_002.jpg?$product_view_c$)
![T-Type [Hexalobular] Wrench EA573AT-27](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007175423_001.jpg?$product_view_c$)
![Long [TORX] Wrench EA573GT-130](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007177380_001.jpg?$product_view_c$)
![Key Wrench Set [TORX] EA573MD-106](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007180238_001.jpg?$product_view_c$)
![Key Wrench Set [Hexalobular] EA573MD-108](http://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007180249_002.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Product Type
-
Torque Adjustment Range (cN/m)
-
Tip Type
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
-
With or without idling function
-
Tip size / flathead (-) blade thickness (mm) B2
-
Torque Precision (±%)
-
Bit Individual Product, Set Product
-
Minimum gradation (cN·m)
-
Overall length (mm)
-
Load direction
-
Bit Quantity
-
Presence of magnet at the blade tip
-
Tip two-sided width size
Brand
CAD data type
-
- 2D
- 3D
Categories related to Torque Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Hexalobular Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter, rotary cutter, scalpel knife
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers, clamps, pliers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Caulking Tools
- Tools Used at Electric Facilities
-
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.