BLICKLE Wheels / Castors for Instrument Castors

Wheel, with Thermoplastic Polyurethane Tread, with Nylon Wheel CentreTread:high-quality thermoplastic polyurethane (TPU), hardness 94 Shore Alow rolling and swivel resistancehigh abrasion resistancecolour dark grey, non-marking, non-stainingchemically-bonded inseparable connection with the wheel centreWheel centre:high-quality nylon 6, impact resistantcolour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C

Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Aluminium Wheel CentreTyre:high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore Avery good operational comfortvery good floor preservation, low-noise operationlow rolling resistancecolour blackvulcanised onto the wheel centreWheel centre:die-cast aluminiumOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C

Solid Steel Flanged WheelWheel:heat-treatable steel, machined, hardness 190–230 HBlightly-oiled surface3° taper tread to axleextremely low rolling resistanceextremely high static and dynamic load capacityOther features:chemical resistance to many aggressive substancesoperating temperature:ball bearing version: -20 °C to +120 °Cheat-resistant ball bearing version: -30 °C to +300 °C, load capacity reduced by 50% at +300 °Cthe load capacities provided in the table refer to the allocation of flanged wheels to rail profiles in accordance with DIN 536 specified below (crane rail standard):SPKVS 50K–SPKVS 200K: A45SPKVS 250K: A55SPKVS 300K–SPKVS 400K: A65electrical conductivity (ohmic resistance) ≤ 104 Ω

Cast Iron Flanged WheelWheel:rugged grey cast iron, hardness 180–220 HBwith grease nipple from wheel Ø 125 mmmachined flange and tread3° taper tread to axleextremely low rolling resistanceoutstanding wear resistancelacquered, colour silverOther features:chemical resistance to many aggressive substancesoperating temperature: -20 °C to +120 °Cto be lubricated according to the application temperaturethe load capacities provided in the table refer to the allocation of flanged wheels to rail profiles in accordance with DIN 536 specified below (crane rail standard):SPK 50G–SPK 200K, SPK 250G, SPK 250K: A45SPK 201K, SPK 251K: A55electrical conductivity (ohmic resistance) ≤ 104 Ω

Solid Steel Flanged Drive Wheel, with Hub KeywayWheel:heat-treatable steel, hardness 190–230 HBlightly-oiled surface3° taper tread to axleextremely low rolling resistanceextremely high static and dynamic load capacityaxle bore and hub keyway in accordance with DIN 6885Other features:chemical resistance to many aggressive substancesoperating temperature: -100 °C to +600 °C, load capacity reduced by 50% at +300 °Cthe load capacities provided in the table refer to the allocation of flanged wheels to rail profiles in accordance with DIN 536 specified below (crane rail standard):SPKVSN 200: A45SPKVSN 250: A55SPKVSN 300: A65electrical conductivity (ohmic resistance) ≤ 104 Ω

Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel CentreTread:high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore Avery low rolling resistancehigh dynamic load capacityhigh abrasion resistancehigh cut and tear propagation resistancecolour brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:rugged grey cast ironwith grease nipple from wheel Ø 150 mmlacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °CGreatly increased load capacity is possible for applications without obstacles.

Heavy Duty Wheel Made of Compressed Cast NylonWheel:high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore Dextremely high load capacityexcellent rolling and swivel resistanceeasy operation on smooth surfaceshigh abrasion resistancecolour natural beigeOther features:high chemical resistance to many aggressive substancesreduced moisture absorptionoperating temperature: -20 °C to +80 °C, reduced load capacity over +35 °Cconsider the surface pressure on sensitive floors due to high point loads

Heavy Duty Drive Wheel, with Hub Keyway, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel CentreTread:high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore Alow rolling resistancehigh abrasion resistancehigh cut and tear propagation resistancecolour light brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:rugged grey cast ironaxle bore and hub keyway in accordance with DIN 6885lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -30 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Heavy Duty Drive Wheel, with Hub Keyway, with Blickle Besthane® Polyurethane Tread, with Cast Iron Wheel CentreTread:high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore Avery low rolling resistancehigh dynamic load capacityhigh abrasion resistancehigh cut and tear propagation resistancecolour brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:rugged grey cast ironaxle bore and hub keyway in accordance with DIN 6885lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -30 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °CGreatly increased load capacity is possible for applications without obstacles.

Heavy Duty Drive Wheel, with Hub Keyway, with Blickle Softhane® Polyurethane Tread, with Cast Iron Wheel CentreTread:high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore Aextra-thick elastic tread for excellent operational comfortvery good floor preservation, low-noise operationlow rolling resistancehigh abrasion resistancehigh cut and tear propagation resistancecolour green, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:rugged grey cast ironaxle bore and hub keyway in accordance with DIN 6885lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -30 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Cast Iron Wheel CentreTread:high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore Alow rolling resistancehigh abrasion resistancehigh cut and tear propagation resistancecolour light brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:rugged grey cast ironlacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Heavy Duty Drive Wheel, with Hub Keyway, with Vulkollan® TreadTread:high-quality polyurethane elastomer Vulkollan®, hardness 92 Shore Avery low rolling resistancehigh dynamic load capacityhigh abrasion resistancehigh cut and tear propagation resistancecolour natural, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:rugged grey cast ironaxle bore and hub keyway in accordance with DIN 6885lacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -30 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °CVULKOLLAN® is a registered trademark of Covestro Group

Rollers for Pallet Trucks, with Blickle Besthane® Polyurethane Tread, with Steel Wheel CentreTread:high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore Avery low rolling resistancehigh dynamic load capacityhigh abrasion resistancehigh cut and tear propagation resistancecolour brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:metalOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Wheel, with Pneumatic Tyre, with Pressed Steel RimTyre:pneumatic tyre, ribbed profile, hardness 60 Shore A4-ply rating, with inner tubemaximum operational comfortexcellent floor preservation, particularly quiet operationcolour blackRim:pressed steelwith welded tubular steel hublacquered, colour silverOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +50 °Cthe wheel and tyre dimensions provided here apply to new tyres that are not bearing a load. Their width and diameter may change when they are in use.speeds up to 16 km/h possible for wheels with ball bearing and reduced load capacity

Rollers for Pallet Trucks, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel Centre, Without Ball BearingsTread:high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore Alow rolling resistancehigh abrasion resistancehigh cut and tear propagation resistancecolour light brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:metalOther features:high chemical resistance to many aggressive substancesoperating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Welded Steel Wheel CentreTread:high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore Alow rolling resistancehigh abrasion resistancehigh cut and tear propagation resistancecolour light brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:thick-walled pressed steel, triple weldedwith welded tubular steel hubresistant to dirt, impact and shockslacquered, colour silverOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel CentreTread:high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore Alow rolling and swivel resistancecolour grey, non-markingchemically-bonded inseparable connection with the wheel centreWheel centre:high-quality polypropylene, impact resistantcolour silver greyOther features:very high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °Ctread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH

Wheel, with Standard Solid Rubber Tyre, with Pressed Steel Rim, Reinforced DesignTyre:standard solid rubber, hardness 80 Shore Avery good operational comfortvery good floor preservation, low-noise operationcolour blackRim:pressed steelstrong rim structure with tubular steel hub, bolted or pressedzinc-plated, blue-passivated, Cr6-freeOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -25 °C to +80 °C, reduced load capacity over +60 °C

Wheel, with Standard Solid Rubber Tyre, with Synthetic RimTyre:standard solid rubber, hardness 80 Shore Avery good operational comfortvery good floor preservation, low-noise operationcolour blackRim:high-quality polypropylene, impact resistantcolour blackOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C

Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Steel Wheel CentreTread:high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore Avery low rolling resistancehigh dynamic load capacityhigh abrasion resistancehigh cut and tear propagation resistancecolour brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:steelOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Blickle Bumper Made of Polyethylene, AG SeriesReduced damage in collisions with walls and vehiclesSimple assembly by affixing to the tubular frame

Heavy Duty Wheel, with Blickle Besthane® Polyurethane Tread, with Aluminium Wheel CentreTread:high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore Avery low rolling resistancehigh dynamic load capacityhigh abrasion resistancehigh cut and tear propagation resistancecolour brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:die-cast aluminiumOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Heavy Duty Wheel, with Blickle Besthane® Soft Polyurethane Tread, with Aluminium Wheel CentreTread:high-quality polyurethane elastomer Blickle Besthane® Soft, hardness 75 Shore Aextra-thick elastic tread for excellent operational comfortvery good floor preservation, low-noise operationvery low rolling resistancehigh dynamic load capacityhigh abrasion resistancehigh cut and tear propagation resistancecolour blue, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:die-cast aluminiumOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Wheel, with 'Blickle Softmotion' Soft Rubber Tyre, with Aluminium Wheel Centre, Non-Marking, GreyTyre:high-quality elastic solid rubber "Blickle SoftMotion", hardness 55 Shore Aexcellent floor preservation, particularly quiet operationlow rolling resistancecolour grey, non-markingvulcanised onto the wheel centreWheel centre:die-cast aluminiumOther features:high chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C

Blickle Templine® Comfort Wheel, with Silicone Rubber Tread, with Aluminium Wheel Centre, Heat-ResistantTread:highly heat-resistant silicone rubber, hardness 75 Shore Ahighly elasticvery good operational comfortvery good floor preservation, low-noise operationageing resistantcolour blackvulcanised onto the wheel centreWheel centre:die-cast aluminiumOther features:chemical resistance to many aggressive substancesoperating temperature: -25 °C to +250 °Coven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C

Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Aluminium Wheel CentreTread:high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore Aextra-thick elastic tread for excellent operational comfortvery good floor preservation, low-noise operationlow rolling resistancehigh abrasion resistancehigh cut and tear propagation resistancecolour green, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:die-cast aluminiumOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel CentreTread:high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore Alow rolling resistancehigh abrasion resistancehigh cut and tear propagation resistancecolour light brown, non-marking, non-stainingexcellent chemical connection with the wheel centreWheel centre:die-cast aluminiumOther features:high chemical resistance to many aggressive substancesoperating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C

Wheel, with Thermoplastic Polyurethane Tread, with Aluminium Wheel Centre, Electrically Conductive, Non-MarkingWheel:high-quality thermoplastic polyurethane (TPU), hardness 92 Shore Alow rolling and swivel resistancehigh abrasion resistancecolour dark grey, non-marking, non-stainingOther features:operating temperature: -20 °C to +134 °C, reduced load capacity over +35 °C, abrasion-resistantsuitable for autoclaveselectrical conductivity (ohmic resistance) ≤ 104 Ω

Blickle Bumper Made of Solid RubberReduced damage in collisions with walls and vehiclesSimple assembly by affixing to the tubular frame

Blickle Bumper Made of Polyethylene, AW SeriesReduced damage in collisions with walls and vehiclesSimple assembly by affixing to the tubular frame

Heavy Duty Twin Wheel, with Elastic Solid Rubber Tyres, with Welded Steel Wheel Centre, Heavy Duty Designhigh-quality elastic solid rubber in smooth rolling quality, steel-wire reinforced, hardness 65 Shore Avery good operational comfortvery good floor preservation, low-noise operationlow rolling resistancecolour blackWheel centre:very strong welded steel constructionwith twice-welded tubular steel hubwith grease nipplelacquered, colour anthraciteOther features:chemical resistance to many aggressive substances, except oilsoperating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C