GANTER Clamping Knobs
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Torque Limiting Knob Screws / GN 3663
GANTER
Torque limiting knob screws GN 3663 are used when the manually applied torque is to be limited.
When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 58.58 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star Knobs with Loss Protection / GN 6336.13
GANTER
Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.56 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star knobs, plastic, threaded bolt Stainless Steel
GANTER
Star knobs GN 6336.5 comply with DIN 6336 type L.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.32 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Quick release star knobs, Plastic
GANTER
Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.
Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.28 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing
Knurled screws, Steel / Stainless Steel
GANTER
Knurled screws DIN 464 are machined from solid bar.
Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.
The official standard sheet also provides for the sizes M1 / M1,2 / M1,6 / M2 and M2,5.- Volume Discount
Starting from∗ ： 1.10 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 40.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Star knobs, Plastic
GANTER
Star knobs DIN 6336 with bore H7 are available under code GN 6336.1 and GN 6336.2.- Volume Discount
Starting from∗ ： 0.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star knobs with movable thrust pad
GANTER
Star knobs GN 6336.12 have a ball pin whose diameter is smaller than the core diameter of the thread.
The movable thrust pad is easily clipped on and taken off.
The thrust pads are supplied unmounted.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Quick release toggle nuts
GANTER
Quick release toggle nuts GN 6305.1 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
Plug the toggle nut onto the threaded bolt at an oblique angle. During the clamping action, it engages into the threads of the bolt.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 19.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Knurled screws, Stainless Steel
GANTER
All Stainless Steel-Knurled screws DIN 464 are machined from solid bar.
Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.- Volume Discount
Starting from∗ ： 2.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star knobs, plastic, with threaded bolt steel
GANTER
Star knobs GN 6336.4 comply with DIN 6336 type L.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Control knobs with adjustable spindle, Aluminium / Steel
GANTER
Control knobs with adjustable spindle GN 727 allow precise adjustment or aligning i. e. of a positive stop. The spindle thread is without backlash.
The graduations on the control knob are non-abrasive and well legible,
The light grey cover shrouds the fixing components as well as the shaft end.
Regarding design, numbering run, numbering position and mubering sequence of the scale please see the layout for scale rings on the order sheet "How to order Graduations".- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 90.80 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Star knobs, plastic, with protruding steel bushing, with threaded bolt steel
GANTER
The star knobs have an immaculate contact or clamping surface thanks to the protruding steel bushing.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 0.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Torque Limiting Knobs / GN 3663
GANTER
Torque limiting knobs GN 3663 are used when the manually applied torque is to be limited.
When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.
After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 58.48 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Knurled screws
GANTER
The knurling of the Stainless Steel-Knurled screws GN 535 allows a use in an environment with hygienic requirements.
Specification- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.24 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Knurled screws with recessed stud for loss prevention
GANTER
Stainless Steel-Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 7.36 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 40.50 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Flat knurled screws with brass / plastic pivot
GANTER
Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
The head dimensions comply with flat knurled thumb screws DIN 653.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand knobs, Aluminum with Stainless Steel-Threaded bolt
GANTER
Hand knobs, Aluminum with Stainless Steel-Threaded bolt- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Star knobs with threaded bolt AISI 304
GANTER
The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
This form gives these grips an appealing look and additionally allows a high torque to be achieved.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 11.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Adjustable knobs
GANTER
With GN 700 adjustable knobs a shaft can be infinitely adjusted in both directions. The anti-backlash mechanism with a max. load of 15 Nm ensures the firm locking of the shaft in any position.
This mechanism prevents any uncontrolled movement of the shaft. The locking action is a safety feature to prevent unwanted re-adjustments caused by backlash and vibration.
Scale and arrow on the control knobs are indelibly marked and easily legible.
Besides the standard scale (Type AS) the control knob version may be supplied with any other scale (Type KS).
Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 220.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand knobs, Plastic, protruding steel bushing, threaded bolt
GANTER
The hand knobs GN 6335.4 have an immaculate contact or clamping surface thanks to the protruding steel bushing.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.22 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Quick release star knobs, Plastic, bushing, Stainless Steel
GANTER
Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.
Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 10.08 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Flat knurled screws with brass / plastic pivot
GANTER
Stainless Steel-Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
The head dimensions comply with flat knurled thumb screws DIN 653.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star knobs with loss protection
GANTER
Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.
The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 6.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 7.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star knobs, Duroplast
GANTER
Star knobs GN 6336.1 with bushing have important advantages:
The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.00 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star knobs, Technopolymer, with protruding steel bushing
GANTER
Star knobs GN 6336.2 with bushing have important advantages:
The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 1.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Waist shaped Stainless Steel-Knobs
GANTER
Waist shaped knobs GN 75.5 boast a compact and timeless design.
They are made of high-grade stainless steel which makes them the first choice when it comes to applications requiring high standards of hygiene. The favourably designed and non-scooped geomtery helps to prevent damp and the related risk of dirt collecting.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 9.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Flat Knurled screws, Stainless Steel
GANTER
All Stainless Steel-Flat knurled screws DIN 653 are produced from one piece and threaded over its full length.- Volume Discount
Starting from∗ ： 2.48 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Knurled screws with recessed stud for loss prevention
GANTER
Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.12 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Knurled screws, with pivot
GANTER
Knurled screws GN 7336.5, type MS/KU with brass or plastic pivots are used when pressure dents or damage must be avoided.
Knurled screws GN 7336.5, type ZK feature a spherical pivot whose Ø d6 is smaller than the core Ø of the thread. The version with spherical pivot is suitable for holding GN 631 / GN 631.5 thrust pads, which must be ordered separately.
The knurled screws GN 7336.5 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 5.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star knobs with pivot
GANTER
Star knobs GN 6336.10 with brass or plastic thrust pad are used when indentations or damage is to be avoided.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.70 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Star knobs, Aluminum with Stainless Steel-Threaded bolt
GANTER
Star knobs, Aluminum with Stainless Steel-Threaded bolt- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Waist shaped knobs, Steel
GANTER
Waist shaped knobs GN 75 boast a compact and timeless design.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.62 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hand knobs with increased clamping force
GANTER
Hand knobs GN 6335.9 have a clamping contact area which is connected to the knob via an axial ball bearing. This has led to the following advantages:
Doubled clamping force through vastly reduced friction. There is no movement on the contact area between star knob and component which greatly reduces any marking on the clamping area. In addition a reduced creep factor has been achieved by the indreased preload.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 27.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Hand knobs, cast, iron, with threaded bolt steel
GANTER
Hand knobs, cast, iron, with threaded bolt steel- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 7.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade
GANTER
The hand knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 2.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Knurled screws, Plastic
GANTER
Knurled screws GN 7336 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).
Knurled screws GN 7336 are also available without threaded insert.
Article codes:
GN 7336-34
GN 7336-42
GN 7336-53- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel-Hand knobs
GANTER
Stainless Steel-Hand knobs- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 17.42 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 14.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Control knobs, Aluminium, black anodized
GANTER
The light grey cover of the control knobs GN 726.1 shrouds the fixing components as well as the shaft end. The cover also lends itself for a logo or other symbols.
The collet version permits a simple adjustment of the types with scale or arrow.
Scale and arrow on the control knobs are indelibly marked and easily legible.
Besides the standard scale (Type S) the control knobs can be supplied with any type of graduation.
Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 9.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Hand knobs with threaded bushing in brass
GANTER
Hand knobs DIN 6335 with bore H7 are available as GN 6335.1.- Volume Discount
Starting from∗ ： 0.92 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Main Body Type |
| Mounting Section Type |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Types of round-shaped |
| 4-side finish |
| Polygon, type |
| T Shaped Kind |
| Additional Function |
| Male Tip Machining |
| Female Thread, Round hole processing |
| Set Screw Thread Machining |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Product Series | Star knobs, plastic, with protruding steel bushing, with threaded bolt steel | Stainless Steel-Knurled screws with recessed stud for loss prevention | Hand knobs, Plastic, protruding steel bushing, threaded bolt | Stainless Steel-Flat knurled screws with brass / plastic pivot | Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
| Starting from∗ | 58.58 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 4.56 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 1.32 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 6.28 € *Unit price with basic configuration Volume Discount | 1.10 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 40.82 € *Unit price with basic configuration Volume Discount | 0.90 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 3.08 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 19.20 € *Unit price with basic configuration Volume Discount | 2.68 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 0.76 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 90.80 € *Unit price with basic configuration Volume Discount | 0.76 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 58.48 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 11.24 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.22 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.36 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 40.50 € *Unit price with basic configuration Volume Discount | 4.52 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 13.52 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 11.94 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 220.20 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.22 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.08 € *Unit price with basic configuration Volume Discount | 6.44 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 6.30 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.44 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.00 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 1.52 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.28 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.48 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.12 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.26 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.70 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 13.52 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 3.62 € *Unit price with basic configuration Volume Discount | 27.86 € *Unit price with basic configuration Volume Discount | 7.66 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 2.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 4.26 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 17.28 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 17.42 € *Unit price with basic configuration Volume Discount | 14.82 € *Unit price with basic configuration Volume Discount | 9.28 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 0.92 € Special price *Unit price with basic configuration Promotional pricingVolume Discount |
| Min. Shipping Days ： | Same day | Same day | Same day | 3 Days | Same day | 7 Days | Same day | Same day | 7 Days | Same day | Same day | 7 Days | Same day | Same day | Same day | Same day | Same day | 7 Days | Same day | Same day | Same day | Same day | Same day | 7 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 7 Days | Same day | Same day | Same day | Same day | 7 Days | 7 Days | Same day | Same day |
| Main Body Type | - | - | - | - | Round shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Type | - | - | - | - | Male thread (stepped) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter d(mm) and/or Diameter | M 4 ～ M 12 | - | M 6 ～ M 12 | - | M2 ～ M10 | - | M 4 ～ M 16 | - | - | - | - | - | M 5 ～ M 12 | M 3 ～ M 12 | - | - | - | - | - | - | - | - | M 8 | - | - | - | - | - | M 5 ～ M 16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Length L(mm) | 12 ～ 63 | 10 ～ 50 | 10 ～ 55 | - | 4 ～ 40 | - | - | 25 ～ 55 | - | - | 10 ～ 70 | - | 10 ～ 60 | - | - | 15 ～ 42 | - | - | - | 20 ～ 55 | 20 ～ 50 | - | 16 ～ 60 | - | - | - | - | - | - | - | - | 15 ～ 42 | - | 10 ～ 55 | 20 ～ 55 | - | - | 15 ～ 70 | 16 ～ 60 | 11 ～ 50 | 20 ～ 55 | - | - | - | - |
| Types of round-shaped | - | - | - | - | Cylindrical | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| 4-side finish | - | - | - | - | Knurled | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Polygon, type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| T Shaped Kind | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Additional Function | - | - | - | - | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Male Tip Machining | - | - | - | - | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Female Thread, Round hole processing | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Set Screw Thread Machining | - | - | - | - | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | - | - | - | - | Stainless Steel / Steel | - | Polypropylene | - | Steel | Stainless Steel | - | - | - | - | - | Stainless Steel | Aluminum | - | Steel | - | - | - | - | - | Stainless Steel | - | Aluminum | - | - | - | Stainless Steel | Steel | - | - | - | - | - | - | - | Stainless Steel / Steel | - | - | - | - | Polypropylene |
| Main Body Surface Treatment | - | - | - | - | Shot Blasted / Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Material | - | - | - | - | Stainless Steel / Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Surface Treatment | - | - | - | - | Shot Blasted / Zinc Plating / Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Main Body Type
-
Round shape
-
Polygon
-
T-Shaped
-
Butterfly Shaped
-
Special Forms
-
Related Components
-
Round shape
-
Mounting Section Type
- Male thread
- Male thread (stepped)
- Female Thread
- Female Screw (Stepped)
- Round Hole
- Press Fitting Type
- Other
- With Screw
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
- 2
- 3
- 3.5
- 4
- 5
- 6
- 6.5
- 6.6
- 7
- 7.2
- 7.5
- 8
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.5
- 9.6
- 10
- 10.5
- 10.7
- 11
- 11.5
- 11.8
- 12
- 12.5
- 13
- 13.4
- 13.5
- 13.8
- 14
- 14.5
- 14.6
- 15
- 16
- 17
- 18
- 18.4
- 18.8
- 19
- 19.6
- 20
- 21
- 22
- 23
- 23.4
- 23.8
- 24
- 24.6
- 25
- 26
- 26.5
- 27
- 28
- 28.4
- 28.5
- 28.8
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 39.5
- 40
- 42
- 45
- 48
- 50
- 54.5
- 55
- 58
- 60
- 63
- 70
- 75
- 80
- 90
- 110
-
Types of round-shaped
-
Cylindrical
-
Clamp Shape
-
Mushroom Shape
-
Chrysanthemum Type
-
Volume Knob Type
-
Ball
-
Cylindrical
-
4-side finish
-
Polygon, type
-
T Shaped Kind
-
Additional Function
-
Male Tip Machining
-
Female Thread, Round hole processing
-
Set Screw Thread Machining
-
Main Body Material
- Stainless Steel
- Steel
- Aluminum
- Nylon
- Phenol
- ABS
- Polyacetal
- Brass
- Polyamide
- Polypropylene
- Melamine Resin
- EPDM
- Other
- Vinyl
- Plastic
- Cast Iron
- Resin
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
Narrow search by specifying Brand
-
- MISUMI (37)
- NORELEM (272)
- KIPP (253)
- ESCO (166)
- GANTER (113)
- ELESA (111)
- KONISHI MFG (62)
- NABEYA BI-TECH (49)
- HALDER (38)
- MITSUBOSHI CI (18)
- DAIMARU BYORA SEISAKUSHO (16)
- IMAO CORPORATION (12)
- TAKIGEN (10)
- TRUSCO NAKAYAMA (7)
- GOSHO WORKS (6)
- REYHER (3)
- SUNCO (3)
- KONOE (2)
- KYOWA (2)
- SHIMIZU (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Clamping Knobs
-
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hooks and Shackels
- Handles
- Clamping Knobs
- Clamping Levers
- Rotation Handles, Crank Handles
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
- Building Hardware / Interiors / Exteriors
-
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.