MAEDLER Transmissions, Reducers

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 12 Days or Less 14 Days or Less 19 Days or Less 20 Days or Less

?* Information on days to ship and prices

Bevel Gearboxes KEK Version A

MAEDLER

Angular drives with high torques at very low dimensions.
Suitable in a wide variety of applications
8 Sizes. Ratio 1:1.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Gearing: Bevel gears from steel, surface hardened.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 3°+/-1°.
Operating time: 20% at 5 min.
Life time: 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%.
Permissable operating temperature: -20° to +60°C.

* Not according to DIN 6885.

Volume Discount

Starting from^∗ ：	118.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Worm Gear Units KES 30

MAEDLER

Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 30 mm, in 8 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%, at +20°C.
Permissable operating temperature: -20° to +60°C.

Volume Discount

Starting from^∗ ：	253.45 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes HUG, Ratio 1:1

MAEDLER

General: Miniaturised right-angle drives for light duty.
Suitable for manual and short term drive applications.
Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion, high rigidity.
Electrical insulating. Shafts hardened and ground.
Gearing: straight teeth, max. backlash 2º. Speed max. 1,000min^-1.
Version A: with steel bevel gears, bonded onto the shafts.
Version B: with polyacetal bevel gears, moulded onto the shafts.

Volume Discount

Starting from^∗ ：	48.33 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Miniature Bevel Gearboxes MKU Model K

MAEDLER

Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.

Model K: Input side C: Transmission ratio for gearing down.

Permiss. Ambient temperature -10°C to +90°C.

Volume Discount

Starting from^∗ ：	305.45 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Miniature Bevel Gearboxes MKU Model H

MAEDLER

Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.

Model H: Straight-through output hollow shaft, slowly turning.

Permiss. Ambient temperature -10°C to +90°C.

Volume Discount

Starting from^∗ ：	322.76 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angular Drive OW3, Ratio 1:1, Version 30 R

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.

Version 30 R: Two shafts with two bevel gears.
On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it's sense of rotation can be chosen freely.

Volume Discount

Starting from^∗ ：	44.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZA, Version A

MAEDLER

General data: 4 sizes.
Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
Ratio for gearing up to max. 750 min^-1 possible.
Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.

Volume Discount

Starting from^∗ ：	168.63 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Worm Gear Units KES 15

MAEDLER

Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 15 mm, in 5 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%, at +20ºC.
Permissable operating temperature: -20° to +60°C.

Volume Discount

Starting from^∗ ：	187.11 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Worm Gear Units KES 20

MAEDLER

Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 20 mm, in 7 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%, at +20ºC.
Permissable operating temperature: -20° to +60°C.

Volume Discount

Starting from^∗ ：	200.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZA, Version B

MAEDLER

Volume Discount

Starting from^∗ ：	174.24 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angular Drive OW2, Ratio 1:1, with Polyketone Bevel Gears

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable.
Bevel gears from polyketone resin, injection-moulded.
• Low cost angular gear drive, ratio 1:1, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking.
Shaft angle = 90º. Temperature range - 20°C to +100º C.

Volume Discount

Starting from^∗ ：	40.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Miniature Bevel Gearboxes MKU Model L

MAEDLER

Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.

Model L: Straight-through output shaft, slowly turning.

Permiss. Ambient temperature -10°C to +90°C.

Volume Discount

Starting from^∗ ：	305.45 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angular Drive OW2, Ratio 1:1, with Polyacetal Bevel Gears

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable.
Bevel gears from polyacetal resin, injection-moulded.
• Low cost angular gear drive, ratio 1:1, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Polyacetal: Standard quality with high hardness.
Shaft angle = 90º. Temperature range - 20°C to +100º C.

Volume Discount

Starting from^∗ ：	31.71 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZA Model H, Size 2

MAEDLER

General data: Gearbox with hollow shaft on the output side.
Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.
The maximum input speed (hollow shaft as input device) for gearing up is 750 min^-1 at 2 : 1 and 500 min^-1 at 3 : 1.
Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.

Volume Discount

Starting from^∗ ：	439.47 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angular Drive OW3, Ratio 1:1, Version 30 L

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.

Version 30 L: Two shafts with two bevel gears.
On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it's sense of rotation can be chosen freely.

Volume Discount

Starting from^∗ ：	44.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angular Drive OW3, Ratio 1:1, Version 20

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.

Version 20: Three shafts with three bevel gears.
Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it's sense of rotation be chosen freely.

Volume Discount

Starting from^∗ ：	44.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes KEK Version B

MAEDLER

Angular drives with high torques at very low dimensions.
Suitable in a wide variety of applications
8 Sizes. Ratio 1:1.

Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Gearing: Bevel gears from steel, surface hardened.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 3°+/-1°.
Operating time: 20% at 5 min.
Life time: 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%.
Permissable operating temperature: -20° to +60°C.

* Not according to DIN 6885.

Volume Discount

Starting from^∗ ：	163.20 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZR, Stainless Steel, Version A

MAEDLER

General data: High resistance to corrosion.
4 sizes.
Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
Ratio for gearing up to max. 750 min^-1 possible.
Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.

Volume Discount

Starting from^∗ ：	606.15 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZR, Stainless Steel, Version B

MAEDLER

Volume Discount

Starting from^∗ ：	644.91 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZA Model H, Size 3

MAEDLER

Volume Discount

Starting from^∗ ：	634.04 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Mounting Division
Type
Reduction Ratio
Shaft Diameter(φ)
The presence or absence of motor
Output shaft type


Brand	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER
Product Series	Bevel Gearboxes KEK Version A	Worm Gear Units KES 30	Bevel Gearboxes HUG, Ratio 1:1	Miniature Bevel Gearboxes MKU Model K	Miniature Bevel Gearboxes MKU Model H	Angular Drive OW3, Ratio 1:1, Version 30 R	Bevel Gearboxes DZA, Version A	Worm Gear Units KES 15	Worm Gear Units KES 20	Bevel Gearboxes DZA, Version B	Angular Drive OW2, Ratio 1:1, with Polyketone Bevel Gears	Miniature Bevel Gearboxes MKU Model L	Angular Drive OW2, Ratio 1:1, with Polyacetal Bevel Gears	Bevel Gearboxes DZA Model H, Size 2	Angular Drive OW3, Ratio 1:1, Version 30 L	Angular Drive OW3, Ratio 1:1, Version 20	Bevel Gearboxes KEK Version B	Bevel Gearboxes DZR, Stainless Steel, Version A	Bevel Gearboxes DZR, Stainless Steel, Version B	Bevel Gearboxes DZA Model H, Size 3
Starting from^∗	118.02 € *Unit price with basic configuration Volume Discount	253.45 € *Unit price with basic configuration Volume Discount	48.33 € *Unit price with basic configuration Volume Discount	305.45 € *Unit price with basic configuration Volume Discount	322.76 € *Unit price with basic configuration Volume Discount	44.02 € *Unit price with basic configuration Volume Discount	168.63 € *Unit price with basic configuration Volume Discount	187.11 € *Unit price with basic configuration Volume Discount	200.56 € *Unit price with basic configuration Volume Discount	174.24 € *Unit price with basic configuration Volume Discount	40.95 € *Unit price with basic configuration Volume Discount	305.45 € *Unit price with basic configuration Volume Discount	31.71 € *Unit price with basic configuration Volume Discount	439.47 € *Unit price with basic configuration Volume Discount	44.02 € *Unit price with basic configuration Volume Discount	44.02 € *Unit price with basic configuration Volume Discount	163.20 € *Unit price with basic configuration Volume Discount	606.15 € *Unit price with basic configuration Volume Discount	644.91 € *Unit price with basic configuration Volume Discount	634.04 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days
Mounting Division	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Type	Bevel gear	Worm Gear	Bevel gear	Bevel gear	Bevel gear	-	Bevel gear	Worm Gear	Worm Gear	Bevel gear	-	Bevel gear	-	Bevel gear	-	-	Bevel gear	Bevel gear	Bevel gear	Bevel gear
Reduction Ratio	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shaft Diameter(φ)	-	-	-	-	-	-	8 ～ 25	-	-	8 ～ 25	-	-	-	14	-	-	-	8 ～ 25	8 ～ 25	19
The presence or absence of motor	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Output shaft type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-