SANDVIK Holding Tools for O.D. Tuning（Application：Chamfer）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Starting from∗ ： 992.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 150.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,123.60 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 326.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 295.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 177.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 537.19 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 544.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 563.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Tool Bit T-Max P Lever Clamp PCLNR / L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 150.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shank Tool Bit T-Max P Lever Clamp PDJNR / L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 212.70 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 284.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 537.19 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 344.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 384.21 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 384.21 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 925.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 441.01 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 806.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 545.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 544.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 517.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,599.91 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 344.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 617.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 617.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 425.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 474.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 425.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 474.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 1,182.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 684.38 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 1,003.08 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 925.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 925.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 144.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 144.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 240.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 240.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 240.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 240.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 240.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 517.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 517.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Application |
| Clamp Shape |
| Cutting Direction |
| Applicable Tip Clearance Angle Type |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Multi-Function Tool CoroPlex TT Twin Tool, CoroTurn RC Double Clamp, C-T-DCL / M | Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP | Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP | CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP | CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR / L-HP-X | CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR / L.-HP | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRDCN | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN / BL | Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL | Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CDJNR/L-15-4 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DDJNR/L-15-2 | Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12 | Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP | Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP | Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-HP | Sandvik CoroTurn 107, Lever Clamp, High Pressure Coolant Specification, C-PDMNR/L-15HP | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCACR / L-S | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR / L-S | Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR / L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR / L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR / L -2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR / L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR / L -4 | Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR / L-HP | |||||||||||||||||||
| Starting from∗ | 992.64 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 150.12 € *Unit price with basic configuration | 1,123.60 € *Unit price with basic configuration | 326.28 € *Unit price with basic configuration | 295.14 € *Unit price with basic configuration | 177.18 € *Unit price with basic configuration | 537.19 € *Unit price with basic configuration | 544.15 € *Unit price with basic configuration | 563.85 € *Unit price with basic configuration | 150.12 € *Unit price with basic configuration | 212.70 € *Unit price with basic configuration | 284.55 € *Unit price with basic configuration | 537.19 € *Unit price with basic configuration | 344.42 € *Unit price with basic configuration | 384.21 € *Unit price with basic configuration | 384.21 € *Unit price with basic configuration | 925.43 € *Unit price with basic configuration | 441.01 € *Unit price with basic configuration | 806.06 € *Unit price with basic configuration | 545.30 € *Unit price with basic configuration | 544.15 € *Unit price with basic configuration | 517.49 € *Unit price with basic configuration | 1,599.91 € *Unit price with basic configuration | 344.42 € *Unit price with basic configuration | 617.16 € *Unit price with basic configuration | 617.16 € *Unit price with basic configuration | 425.39 € *Unit price with basic configuration | 474.67 € *Unit price with basic configuration | 425.39 € *Unit price with basic configuration | 474.67 € *Unit price with basic configuration | 1,182.70 € *Unit price with basic configuration | 684.38 € *Unit price with basic configuration | 1,003.08 € *Unit price with basic configuration | 925.43 € *Unit price with basic configuration | 925.43 € *Unit price with basic configuration | 144.94 € *Unit price with basic configuration | 144.94 € *Unit price with basic configuration | 240.52 € *Unit price with basic configuration | 240.52 € *Unit price with basic configuration | 240.52 € *Unit price with basic configuration | 240.00 € *Unit price with basic configuration | 240.52 € *Unit price with basic configuration | 517.49 € *Unit price with basic configuration | 517.49 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Applicable Tip Shape | C (80° Diamond-Shape) / Other | V (35° Diamond-Shaped) | S (Rectangular) | V (35° Diamond-Shaped) | Other | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | S (Rectangular) | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | R (Circular) | C (80° Diamond-Shape) / V (35° Diamond-Shaped) / R (Circular) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | D (55° Diamond-Shape) |
| Application | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer | Chamfer |
| Clamp Shape | Cable clamp | Double Clamp | Cable clamp | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Lever lock | Lever lock | Lever lock | Lever lock | - | - | - | - | - | - | Clamp-on | Lever lock | Clamp-on | Lever lock | - | Clamp-on | Clamp-on | Cable clamp | Clamp-on | Clamp-on | Cable clamp | Cable clamp | - | - | Lever lock | Lever lock | Lever lock | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Cable clamp | Clamp-on | Clamp-on | Pin Lock | Pin Lock |
| Cutting Direction | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Left-hand / No-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Applicable Tip Clearance Angle Type | - | Negative | Negative | - | Negative | - | Negative | - | - | - | Negative | Negative | Negative | - | - | - | - | - | - | Pozidriv | - | - | - | - | Pozidriv | - | - | - | - | - | - | - | - | - | - | - | Pozidriv | Pozidriv | - | - | - | - | - | Negative | Negative |
| Shank height(mm) | - | - | 20 ～ 40 | - | 40 | 32 | 25 | - | - | - | 20 | 40 ～ 50 | 40 | - | - | - | - | - | - | - | - | - | - | 0 | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 16 | 8 ～ 16 | 32 | 25 ～ 32 | 25 | 25 | 25 ～ 32 | - | - |
| Shank width(mm) | - | - | 20 ～ 40 | - | 25 | 32 | 25 | - | - | - | 20 | 25 ～ 32 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 16 | 8 ～ 16 | 25 ～ 32 | 25 ～ 32 | 25 | 25 | 25 | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Cutting Direction
- Right-hand
- Left-hand
- No-hand
-
Applicable Tip Clearance Angle Type
- Negative
- Pozidriv
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Brand
-
- SANDVIK (76)
- KYOCERA (8)
- NGK SPARK PLUG (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for O.D. Tuning
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.