Bienvenido al nuevo catálogo electrónico de MISUMI.
Hemos actualizado nuestros sistemas en línea. Aquí encontrará más información.
¡Estamos traduciendo nuestra tienda online al español!
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.
YAMAWA MFG Point Taps（Screw size (Nominal)：M4）
6 artículos
* Información sobre días de envío, gastos de envío y precios
YAMAWA MFG
Carbide Tap for Ultra High Hardness Steel UH-CT
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.Más informaciónScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 0.7 5P Carbide High Hardness Steel (50-60 HRC)[○] Point tap For through hole / For blind hole Available ConfigurarPrecio normal (IVA no incluidos):143.95 €Precio IVA incluidos:171.30 €Fecha de envío normal:6 días laborables
- DESCUENTO
- Volume Discount
YAMAWA MFG
Stainless Steel Point Tap SU+PO / SU-PO
Point tap for through-hole machining with extremely viscous or work-hardened work material.[Features]Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.· Capable of machining both synchronously and asynchronously.· Machining speed of 10 m/min or less is recommended.[Applications]· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.Más informaciónScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 0.7 5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] Point tap For through hole N/A ConfigurarPrecio normal (IVA no incluidos):13.13 €～Precio normal (IVA no incluidos):Precio especialFecha de envío normal:6 días laborables
- Volume Discount
YAMAWA MFG
Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO
[Features]· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.· Can also be used for deep tapping operations.Más informaciónScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 0.7 4.5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○] Point tap For through hole Available ConfigurarPrecio normal (IVA no incluidos):46.78 €Precio IVA incluidos:55.67 €Fecha de envío normal:6 días laborables
YAMAWA MFG
Plus Series Point Tap +PO (N+PO)
* N+SP will be replaced with +SP as soon as there is no more in stock.Más informaciónScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 0.7 5P High-speed steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Point tap For blind hole N/A ConfigurarPrecio normal (IVA no incluidos):11.11 €Precio IVA incluidos:13.22 €Fecha de envío normal:6 días laborables
- Volume Discount
YAMAWA MFG
Short Point Tap for Deep Holes S-PO
A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.[Features]· Short thread length gives low frictional resistance.· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.· Oxide treatment (OX treatment) applied to prevent welding.[Applications]· Optimal for deep thread machining to 2.5 times the nominal diameter or more.Más informaciónScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 0.7 5P High-speed steel Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] Point tap For through hole N/A ConfigurarPrecio normal (IVA no incluidos):12.65 €Precio IVA incluidos:15.05 €Fecha de envío normal:8 días laborables
- Volume Discount
YAMAWA MFG
Point Tap for Difficult-to-Cut Materials EH-PO
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.Más informaciónScrew Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Meter M4 0.7 4.5P Cobalt HSS High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○] Point tap For through hole N/A ConfigurarPrecio normal (IVA no incluidos):14.05 €Precio IVA incluidos:16.72 €Fecha de envío normal:8 días laborables