YAMAWA MFG Centering/Countersink

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Cutter for Submarine Gate 20°30° CS-G

YAMAWA MFG

Volume Discount

Starting from^∗ ：	28.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

High Helix Groove Type A 60-Degrees, Center Hole Drill (former JIS1 Type) CE-S (I)

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	15.65 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Holder for Joint Tool for 150 mm and 200 mm

YAMAWA MFG

Common tool that allows a single holder to fit a variety of flutes suitable for different machining applications. [It is economical as you only need to change the flute. -Strengthening fastening force enables high load machining, such as piercing at the butt with the pointed drill.

Starting from^∗ ：	91.49 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

NC Starting Drill for Positioning (125°) NC-SD

YAMAWA MFG

Stable high-precision positioning and chamfering is possible due to high rigidity design. Effective positioning even on difficult-to-machine curved surfaces and gentle slopes.

Volume Discount

Starting from^∗ ：	16.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NC Starting Drill for Chamfering (90°) NC-SD-V

YAMAWA MFG

Stable high-precision positioning and chamfering is possible due to high rigidity design. Effective positioning even on difficult-to-machine curved surfaces and gentle slopes.

Volume Discount

Starting from^∗ ：	21.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TICN Coated Tongue Shank Point Drill PE-60° PE-SL-V

YAMAWA MFG

Point Angle 125°, Chamfer Angle 60°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

Volume Discount

Starting from^∗ ：	79.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TICN Coated Point Drill PE - 60° PE - S - V

YAMAWA MFG

Point Angle 125°, Chamfer Angle 60°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

Volume Discount

Starting from^∗ ：	37.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TICN Coated Point Drill PE - 90° PE - Q - V

YAMAWA MFG

Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

Volume Discount

Starting from^∗ ：	37.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TICN Coated Point Drill Joint Tools PE 90°, JO - PEQV

YAMAWA MFG

Volume Discount

Starting from^∗ ：	41.19 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

TICN Coated Long Shank Point Drill PE 90° PE - QL - V

YAMAWA MFG

Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

Volume Discount

Starting from^∗ ：	75.18 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Counter Sink (For Drilling Machine 90°, 60°) CS-QM

YAMAWA MFG

Is capable of high precision and stable machining of round hole chamfering and small screw, bolt attachment surface chamfering.

Volume Discount

Starting from^∗ ：	13.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Countersink (for Machining Center) CS-Q

YAMAWA MFG

Is capable of high precision and stable machining of round hole chamfering and small screw, bolt attachment surface chamfering.

Volume Discount

Starting from^∗ ：	8.59 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Joint Tool for Counter Sink Drilling Machine 90° JO-CSQM

YAMAWA MFG

Volume Discount

Starting from^∗ ：	30.14 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Starting Drill Joint Tool for Chamfering, 90°, JO-NCSDV

YAMAWA MFG

Volume Discount

Starting from^∗ ：	35.92 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Tang Shank Titanium Coating Strong Spiral Flute A Type 90°, Center Hole Drills, CE - QL - V

YAMAWA MFG

[Features]
-Coating with excellent abrasion resistance and chip removal
[Features]
Centre hole drilling
・ Chamfering.

Volume Discount

Starting from^∗ ：	76.16 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Titanium-Coated High Helix Groove A Type 60°, Joint Tools, JO-CESV

YAMAWA MFG

Volume Discount

Starting from^∗ ：	45.18 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Titanium-Coated High Helix Groove A Type 60°, Center Hole Drills , CE - S - V

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	25.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Titanium Coating Strongly Twisted Groove A Type 60° Center Hole Drill (Old JIS 1 Type) CE-S-V(I)

YAMAWA MFG

Starting from^∗ ：	42.20 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Tang Shank Titanium Coating Strong Spiral Flute A Type 90°, Center Hole Drills, CE - Q - V

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	23.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Titanium-Coated Weak Helix Groove A Type 60° Joint Tool JO - CDSV

YAMAWA MFG

Volume Discount

Starting from^∗ ：	45.18 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Titanium Coated Weak Twist Groove A Type 90° Center Hole Drill CD-Q-V

YAMAWA MFG

Volume Discount

Starting from^∗ ：	34.81 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Point Drill Joint Tool PE - 90° PE - Q

YAMAWA MFG

Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

Volume Discount

Starting from^∗ ：	19.39 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Drill Joint Tools PE-90°, JO-PEQ

YAMAWA MFG

Volume Discount

Starting from^∗ ：	24.54 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Long Shank Titanium Coating Strong Spiral Flute A Type 60°, Center Hole Drills, CE-SL-V

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	65.44 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Long Shank Titanium Coating Low Torsion Groove A Type 60° Center Hole Drill CD-SL-V

YAMAWA MFG

Volume Discount

Starting from^∗ ：	85.68 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Long Shank Strong Spiral Flute A Type 60°, Center Hole Drills, CE - SL

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	43.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Strong Spiral Flute A Type 90°, Center Hole Drills, CE - QL

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	43.31 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Weak Twist Groove A Type 60° Center Hole Drill CD-SL

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	43.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank Low Helix Groove A Type 60° Carbide Center Hole Drill C-CD-SL

YAMAWA MFG

Starting from^∗ ：	132.02 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Long Shank Low Helix Groove A Type 90° Carbide Center Hole Drill C-CD-QL

YAMAWA MFG

Starting from^∗ ：	132.02 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Former JIS2 Type Weak Helix Groove B Type 60° Joint Tool JO-CDS

YAMAWA MFG

Volume Discount

Starting from^∗ ：	27.30 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Strong Helix Groove A-Shaped 60° Joint Tool JO-CES

YAMAWA MFG

Volume Discount

Starting from^∗ ：	25.99 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Strong Helix Groove A-Shaped 60°Center Hole Drill CE-S

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	9.54 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Strong Helix Groove JIS A-Shaped 60°Center Hole Drill CESA

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	13.57 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Strong Helix Groove JIS B-Shaped 60°Center Hole Drill CESB

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	16.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Helix Groove JIS R Type Center Hole Drill CEIR

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Volume Discount

Starting from^∗ ：	64.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Weak Helix Groove A Type 60° Joint Tool JO-CDS

YAMAWA MFG

Starting from^∗ ：	25.99 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Weak Helix Groove A-Shaped 60° Carbide Joint Tool JO-C-CDS

YAMAWA MFG

Starting from^∗ ：	146.75 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Slight Spiral Flute A Type 90°, Super Hard Center Hole Drills C-CD-S

YAMAWA MFG

Suited for Center Hole Drilling in Soft and/or Sticky Materials

Starting from^∗ ：	103.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Weak Helix Groove B-Shaped 60° Center Hole Drill (Former JIS2 Type) CD-S (II)

YAMAWA MFG

Optimal for centre hole drilling of sticky and soft materials
Preliminary centre hole drill type JIS2 with weak spiral flute, suitable for relatively hard materials.

Volume Discount

Starting from^∗ ：	25.51 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide Point Drill Joint Tool PE-60° C-PE-S-V

YAMAWA MFG

Point Angle 125°, Chamfer Angle 60°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

Starting from^∗ ：	113.14 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide Point Drill Joint Tool PE-90° C-PE-Q-V

YAMAWA MFG

Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

Starting from^∗ ：	113.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Point Drill Joint Tool PE-90°

YAMAWA MFG

Starting from^∗ ：	173.87 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Medium Hardness Carbon Steel / Center Hole Drill for High Speed Machining MHCDS

YAMAWA MFG

Volume Discount

Starting from^∗ ：	20.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coated Low-Helix-Groove Center-Hole Drill, A Type 60°, CD-S V

YAMAWA MFG

[Features]
· A coated low-helix-groove A-type center-hole drill. Boasts excellent abrasion and weld resistance.

Volume Discount

Starting from^∗ ：	34.69 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Application
Tip angle (θ)
Tool Diameter (D)(mm)
work material
Single blade, two blades
Peripheral Blade Y/N
Tool Material Type
Coating Y/N
Coating Type
R Size (R)(mm)

		Promotional pricing ends 30/11/2024									Promotional pricing ends 30/11/2024	Promotional pricing ends 30/11/2024																					Promotional pricing ends 30/11/2024	Promotional pricing ends 30/11/2024
Brand	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	Cutter for Submarine Gate 20°30° CS-G	High Helix Groove Type A 60-Degrees, Center Hole Drill (former JIS1 Type) CE-S (I)	Holder for Joint Tool for 150 mm and 200 mm	NC Starting Drill for Positioning (125°) NC-SD	NC Starting Drill for Chamfering (90°) NC-SD-V	TICN Coated Tongue Shank Point Drill PE-60° PE-SL-V	TICN Coated Point Drill PE - 60° PE - S - V	TICN Coated Point Drill PE - 90° PE - Q - V	TICN Coated Point Drill Joint Tools PE 90°, JO - PEQV	TICN Coated Long Shank Point Drill PE 90° PE - QL - V	Counter Sink (For Drilling Machine 90°, 60°) CS-QM	Countersink (for Machining Center) CS-Q	Joint Tool for Counter Sink Drilling Machine 90° JO-CSQM	Starting Drill Joint Tool for Chamfering, 90°, JO-NCSDV	Tang Shank Titanium Coating Strong Spiral Flute A Type 90°, Center Hole Drills, CE - QL - V	Titanium-Coated High Helix Groove A Type 60°, Joint Tools, JO-CESV	Titanium-Coated High Helix Groove A Type 60°, Center Hole Drills , CE - S - V	Titanium Coating Strongly Twisted Groove A Type 60° Center Hole Drill (Old JIS 1 Type) CE-S-V(I)	Tang Shank Titanium Coating Strong Spiral Flute A Type 90°, Center Hole Drills, CE - Q - V	Titanium-Coated Weak Helix Groove A Type 60° Joint Tool JO - CDSV	Titanium Coated Weak Twist Groove A Type 90° Center Hole Drill CD-Q-V	Point Drill Joint Tool PE - 90° PE - Q	Point Drill Joint Tools PE-90°, JO-PEQ	Long Shank Titanium Coating Strong Spiral Flute A Type 60°, Center Hole Drills, CE-SL-V	Long Shank Titanium Coating Low Torsion Groove A Type 60° Center Hole Drill CD-SL-V	Long Shank Strong Spiral Flute A Type 60°, Center Hole Drills, CE - SL	Long Shank Strong Spiral Flute A Type 90°, Center Hole Drills, CE - QL	Long Shank Weak Twist Groove A Type 60° Center Hole Drill CD-SL	Long Shank Low Helix Groove A Type 60° Carbide Center Hole Drill C-CD-SL	Long Shank Low Helix Groove A Type 90° Carbide Center Hole Drill C-CD-QL	Former JIS2 Type Weak Helix Groove B Type 60° Joint Tool JO-CDS	Strong Helix Groove A-Shaped 60° Joint Tool JO-CES	Strong Helix Groove A-Shaped 60°Center Hole Drill CE-S	Strong Helix Groove JIS A-Shaped 60°Center Hole Drill CESA	Strong Helix Groove JIS B-Shaped 60°Center Hole Drill CESB	High Helix Groove JIS R Type Center Hole Drill CEIR	Weak Helix Groove A Type 60° Joint Tool JO-CDS	Weak Helix Groove A-Shaped 60° Carbide Joint Tool JO-C-CDS	Slight Spiral Flute A Type 90°, Super Hard Center Hole Drills C-CD-S	Weak Helix Groove B-Shaped 60° Center Hole Drill (Former JIS2 Type) CD-S (II)	Carbide Point Drill Joint Tool PE-60° C-PE-S-V	Carbide Point Drill Joint Tool PE-90° C-PE-Q-V	Carbide Point Drill Joint Tool PE-90°	Medium Hardness Carbon Steel / Center Hole Drill for High Speed Machining MHCDS	Coated Low-Helix-Groove Center-Hole Drill, A Type 60°, CD-S V
Starting from^∗	28.46 € *Unit price with basic configuration Volume Discount	15.65 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	91.49 € *Unit price with basic configuration	16.76 € *Unit price with basic configuration Volume Discount	21.63 € *Unit price with basic configuration Volume Discount	79.27 € *Unit price with basic configuration	37.11 € *Unit price with basic configuration Volume Discount	37.16 € *Unit price with basic configuration Volume Discount	41.19 € *Unit price with basic configuration Volume Discount	75.18 € *Unit price with basic configuration Volume Discount	13.96 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	8.59 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	30.14 € *Unit price with basic configuration Volume Discount	35.92 € *Unit price with basic configuration Volume Discount	76.16 € *Unit price with basic configuration Volume Discount	45.18 € *Unit price with basic configuration Volume Discount	25.44 € *Unit price with basic configuration Volume Discount	42.20 € *Unit price with basic configuration	23.51 € *Unit price with basic configuration Volume Discount	45.18 € *Unit price with basic configuration Volume Discount	34.81 € *Unit price with basic configuration Volume Discount	19.39 € *Unit price with basic configuration	24.54 € *Unit price with basic configuration Volume Discount	65.44 € *Unit price with basic configuration Volume Discount	85.68 € *Unit price with basic configuration Volume Discount	43.56 € *Unit price with basic configuration Volume Discount	43.31 € *Unit price with basic configuration Volume Discount	43.56 € *Unit price with basic configuration Volume Discount	132.02 € *Unit price with basic configuration	132.02 € *Unit price with basic configuration	27.30 € *Unit price with basic configuration Volume Discount	25.99 € *Unit price with basic configuration Volume Discount	9.54 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	13.57 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	16.43 € *Unit price with basic configuration Volume Discount	64.11 € *Unit price with basic configuration	25.99 € *Unit price with basic configuration	146.75 € *Unit price with basic configuration	103.42 € *Unit price with basic configuration	25.51 € *Unit price with basic configuration Volume Discount	113.14 € *Unit price with basic configuration	113.14 € *Unit price with basic configuration	173.87 € *Unit price with basic configuration	20.51 € *Unit price with basic configuration Volume Discount	34.69 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	6 Days	Same day	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	6 Days	Same day	Same day	8 Days	8 Days	7 Days	8 Days	6 Days	8 Days	6 Days	8 Days	8 Days	6 Days	8 Days	7 Days	8 Days	6 Days	6 Days	6 Days	8 Days	8 Days	8 Days	8 Days	Same day	Same day	6 Days	6 Days	8 Days	9 Days	6 Days	8 Days	8 Days	6 Days	9 Days	6 Days	8 Days
Application	Other	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning)
Tip angle (θ)	20 ～ 30	60°	-	60 ～ 90	60 ～ 90	125°	125°	125°	90	125°	60 ～ 90	90	90	90	90°	60°	60°	60°	90°	60°	90°	125°	90°	60°	60°	60°	90°	60°	60°	90°	60°	60°	60°	60°	60°	-	60°	60°	60°	60°	125°	125°	90	60 ～ 90	60
Tool Diameter (D)(mm)	6 ～ 8	8 ～ 14	14 ～ 20	1 ～ 5	3 ～ 20	6 ～ 16	3 ～ 20	3 ～ 20	10 ～ 16	4 ～ 20	6 ～ 12	4 ～ 16	10 ～ 12	10 ～ 16	4 ～ 12	10 ～ 16	4 ～ 18	8 ～ 14	4 ～ 18	10 ～ 16	4 ～ 18	4	10 ～ 16	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	10 ～ 16	10 ～ 16	3 ～ 7.7	8	3.15 ～ 31.5	16	10 ～ 16	10 ～ 16	4 ～ 18	6 ～ 25	6 ～ 10	3 ～ 16	10 ～ 16	1 ～ 6	-
work material	-	-	-	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	-	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	-	-	-	-	-	-	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	-
Single blade, two blades	Single blade	Double-edged	-	Single blade	Single blade	Double-edged	Double-edged	Double-edged	Single blade	-	Single blade	Single blade	Single blade	Single blade	Double-edged	Single blade	Double-edged	Double-edged	Double-edged	Single blade	Double-edged	Double-edged	Single blade	Double-edged	Double-edged	Double-edged	Double-edged	Double-edged	Double-edged	Double-edged	Single blade	Single blade	Double-edged	Double-edged	Double-edged	Double-edged	Single blade	Single blade	Double-edged	Double-edged	Double-edged	Double-edged	Single blade	Single blade	Double-edged
Peripheral Blade Y/N	N/A	N/A	N/A	Available	Available	N/A	N/A	N/A	N/A	N/A	Available / N/A	Available / N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Available	N/A
Tool Material Type	High-speed steel	High-speed steel	-	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	High-speed steel	Carbide	Carbide	Carbide	High-speed steel	High-speed steel
Coating Y/N	N/A	N/A	N/A	Available	Available	Available	Available	Available	Available	Available	Available / N/A	Available / N/A	N/A	Available	Available	Available	Available	Available	Available	Available	Available	N/A	N/A	Available	Available	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Available	Available	Available	Available	Available
Coating Type	-	-	-	-	-	TiCN	TiCN	TiCN	TiCN	TiCN	-	-	-	TiN	TiN	TiN	TiN	TiN	TiN	TiN	TiN	-	-	TiN	TiN	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	TiAlN	TiAlN	TiAlN	-	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Drilling
- Other
Images

Clear

Tip angle (θ)
20

30

45

60

60°

60 × 120

80

90

90°

118

120

120°

125°
Drawing

Clear

Tool Diameter (D)(mm)
0.03

0.04

0.05

0.06

0.07

0.08

0.09

0.1

0.11

0.12

0.13

0.14

0.15

0.16

0.17

0.18

0.19

0.2

0.21

0.22

0.23

0.24

0.25

0.26

0.27

0.28

0.29

0.3

0.35

0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.75

0.8

0.85

0.9

0.95

1

1.1

1.2

1.25

1.3

1.4

1.5

1.6

1.6～3.35

1.7

1.8

1.9

2.

2

2.1

2.2

2.3

2.4

2.5

2.5～5.3

2.6

2.7

2.8

2.9

3

3.1

3.15

3.2

3.5

3.8

4

4.3

5

5.3

5.8

6

6.3

6.3,8.3,10.4,12.4,16.5,20.5

6.30/8.30/10.40/12.40/16.50/20.50

6.3/8.3/10.4/12.4/16.5/20.5

6.35

7

7.3

7.7

8

8.3

9

9.4

9.52

10

10.4

11

11.2

11.5

12

12.4

12.5

12.7

13

13.4

14

14.4

15

15.87

16

16.5

18

18.5

19

19.05

20

20.5

21

22

22.5

23

25

25.0(+0.3)

25.4

26

27

28

30

31

31.5

32

34

35

36

37

40

45

46

50

55

60

63

65

70

75

80

90

95

100
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Single blade, two blades
- Single blade
- Double-edged
Images

Clear

Peripheral Blade Y/N
- Available
- N/A
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Carbide
Details

Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiAlN
- TiCN
- TiN
- DLC
- Non-Coated
- Other
Details

Clear

R Size (R)(mm)
8
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (23)
- Cost Efficient Products ()
- YAMAWA MFG (46)
- IWATA TOOL (32)
- GUHRING (22)
- ESCO (12)
- ILIX (10)
- EIKOSHA (9)
- NAKAJIMAKOUKI (9)
- ATOM (7)
- NOGAJAPAN (6)
- WOLFCRAFT (5)
- TRUSCO NAKAYAMA (5)
- WATERMILLS (5)
- KYOWA SEIKO (4)
- REX TOOLS (4)
- DIXI (3)
- METABO (3)
- OSG (3)
- TAIYO-TOOL (3)
- ALPEN (2)
- THE CUT (2)
- WERA (2)
- PREVOST (1)
- DIJET (1)
- NIKKEN KOSAKUSHO (1)
- RYOKO SEIKI (1)
- SKC (1)
- WALTER TITEX (1)
Clear