Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Internal thread	Straight	4 ～ 30	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped	Internal thread	Straight	8 ～ 30	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Internal thread	5 ～ 30	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Internal thread	8 ～ 30	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	External thread	5 ～ 30	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	External thread	8 ～ 30	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Straight	5 ～ 30	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Straight	8 ～ 30	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Internal thread	6 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	External thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Straight	4 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped / Solid, Both Ends Stepped	External thread	Straight / External thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Retaining ring grooves	Retaining ring grooves	3 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Keyway	Straight	6 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped	Straight / Internal thread	Internal thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	External thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Straight	Straight	3 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Internal thread	Internal thread	4 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Internal thread	Internal thread	6 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Internal thread	Straight	6 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Internal thread	4 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	External thread	6 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Straight	4 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Straight	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Straight	3 ～ 30	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	External thread	3 ～ 30	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped	External thread	Internal thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, Both Ends Stepped	Straight / Internal thread	Straight / Internal thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, Both Ends Stepped	Internal thread	Internal thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped	Internal thread	Internal thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped	Straight / Internal thread	Straight	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped	Internal thread	Straight	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Internal thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Internal thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid / Solid, One End Stepped	External thread	Straight	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid / Solid, One End Stepped	Taper	Internal thread / External thread	6 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Internal thread	Straight	4 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	Internal thread	6 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	External thread	3 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	External thread	External thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped / Solid, Both Ends Stepped	External thread	Straight / External thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid, One End Stepped	Straight / Internal thread	External thread	8 ～ 50	h5 ～ g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Internal thread / External thread	Hex socket	6 ～ 20	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Straight / Internal thread / External thread	Internal thread hole	15 ～ 50	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / LTBC Plating	-

Basic Shape	Shaft end Shape (Left)	Shaft end Shape (Right)	[D] Diameter (Shaft) (mm)	ISO Tolerance	Material	Heat Treatment	Surface Treatment	Mounting Type
Solid	Internal thread / External thread	Positioning Hole and internal thread	12 ～ 50	g6	Stainless Steel (martensitic)	Induction Hardened	No Treatment / Hard Chrome Plating / LTBC Plating	-

¡Estamos traduciendo nuestra tienda online al español!  
Pero como tenemos muchos productos y páginas, esto lleva tiempo. Mientras tanto, nuestro catálogo de productos estará en inglés. Gracias por su paciencia.

Configurar

Shaft end Shape (Left)
Shaft end Shape (Right)
[D] Diameter (Shaft) (mm)
- 1.5
- 2.0
- 2.5
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 18
- 20
- 25
- 30
- 35
- 40
- 50
ISO Tolerance
- h5
- g6
- h7
Material
- Stainless Steel (martensitic)
Heat Treatment
- Induction Hardened
Surface Treatment
- No Treatment
- Hard Chrome Plating
- LTBC Plating
Mounting Type
- No machining
Shaft end Perpendicularity
- Perpendicularity (0.2)
- Perpendicularity (0.03)
Cleaning Method
- Degreasing and washing
- Precision cleaning
Features, Areas of application
- Cleaning
- Not applicable
Certificates
- RoHS requirements fulfilled
Fabricante
CAD
- 2D
- 3D

Linear Shafts (Material: Stainless Steel (martensitic) página 2)

At MISUMI, you will find mechanical components such as highly configurable linear shafts in many geometric designs that can be customized to your needs.
Use our configurator to preselect your individual steel shaft. Do you need help? Here you will find useful tutorials for using our configurator.

MISUMI offers a variety of mechanical components, namely configurable solid shafts, linear rail shafts, hollow linear motion shafts, and precision linear motion shafts with straight, offset, and conical ends. Our product range includes steel shafts with shaft diameters from 3 to 50mm, as well as shaft lengths from 10 to 1500mm and ISO tolerances: h5, k5, g6, f8, h6, h7. The precision linear shafts are characterized by particularly high straightness and perpendicularity. The MISUMI online shop offers various fixing variants for our linear shafts, such as external and internal threads, adjustment screw grooves, locking ring grooves, and spring grooves. Additional configuration options for our solid shafts and hollow shafts include the selection of the material, hardness, surface treatment, and surface coating. At MISUMI, you can choose between untempered steel, induction-hardened steel shafts (inductive boundary layer hardening), low-alloy steel, rolling bearing steel, and stainless steel shafts. For linear shafts, surface coatings can be selected from chemically nickel-plated, LTBC-coated, and hard chrome plated.

The MISUMI linear motion shafts and precision linear motion shafts can be used in a wide range of applications. Our steel shafts are used in 3D printers, packaging machines, sorting systems, and in applications in medicine, pharmaceuticals, and the automotive industry.

MISUMI offers you various helpful tools that can significantly shorten and simplify the design process. Here are some of the useful tools:
meviy	Rapid-Design	FRAMES	Tech-Blog
On-Demand manufacturing via CAD data upload	Add-on for SOLIDWORKS	Software for aluminum profile design	Interesting articles

Basic Shape

91 artículos

* Información sobre días de envío, gastos de envío y precios

Lista

Foto

Comparar especificaciones

Número de artículos que mostrar:Ordenar según:

Order quantities extended (D-JIT)
MISUMI
Linear shafts / internal thread on one side / spanner flat
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Internal thread Straight 4 ～ 30 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
7 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / steel / stainless steel / treatment selectable / stepped on one side / internal thread / spanner flat
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped Internal thread Straight 8 ～ 30 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
9 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / offset on one side / external thread / internal thread / spanner flat
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Internal thread 5 ～ 30 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
9 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / offset on one side / external thread / internal thread / undercut / spanner flat
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Internal thread 8 ～ 30 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
9 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / steel / stainless steel / treatment selectable / stepped on both sides / external thread / flats
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread External thread 5 ～ 30 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
9 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / steel / stainless steel / treatment selectable / stepped on both sides / external thread / undercut / flats
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread External thread 8 ～ 30 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
9 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / Wrench flat
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Straight 5 ～ 30 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
9 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / undercut / spanner flat
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Straight 8 ～ 30 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
9 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread / spanner flat / radial bore
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Internal thread 6 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
4 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / material selectable / treatment selectable / stepped on both sides / external thread / undercut / spanner flat / radial bore
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread External thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
4 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / stepped on one side / external thread
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Straight 4 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
4 días laborables
Configurar
Order quantities extended (D-JIT)
MISUMI
Linear shafts / stepped on one side / external thread / stepped on two sides / external thread
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped / Solid, Both Ends Stepped External thread Straight / External thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating -
Fecha de envío normal:
4 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft with Retaining Ring Groove
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Retaining ring grooves Retaining ring grooves 3 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - One End Keyway
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Keyway Straight 6 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - One End Stepped, Both Ends Tapped
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped Straight / Internal thread Internal thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - Both Ends Threaded with Undercut
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread External thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - Straight
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Straight Straight 3 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
9 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - Both Ends Tapped
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Internal thread Internal thread 4 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
9 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - Both Ends Tapped with Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Internal thread Internal thread 6 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
9 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - One End Tapped with Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Internal thread Straight 6 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
9 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - One End Threaded and One End Tapped
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Internal thread 4 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - Both Ends Threaded with Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread External thread 6 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - One End Threaded
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Straight 4 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack] Shaft - One End Threaded with Undercut and Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□ Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv. ■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Straight 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Threaded With O.D. Same as Shaft O.D
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Straight 3 ～ 30 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - Both Ends Threaded With O.D. Same as Shaft O.D
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread External thread 3 ～ 30 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Stepped and Threaded One End Tapped
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]One End Stepped and Threaded / One End Tapped type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). The L Dim. standard has been expanded. Now you can purchase an even more complete line-up.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped External thread Internal thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - Both Ends Stepped and Tapped/Both Ends Stepped
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, Both Ends Stepped Straight / Internal thread Straight / Internal thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - Both Ends Stepped and Tapped With Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with Both Ends Stepped and Tapped with Wrench Flats. The L Dim. standard has been expanded. Now you can purchase an even more complete line-up.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, Both Ends Stepped Internal thread Internal thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Stepped, Both Ends Tapped With Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped Internal thread Internal thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Stepped and Tapped/One End Stepped
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped Straight / Internal thread Straight 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Stepped and Tapped With Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped Internal thread Straight 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Threaded, One End Tapped With Relief Groove
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Internal thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Threaded, One End Tapped, With Relief Groove and Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Internal thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Threaded With Relief Groove
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid / Solid, One End Stepped External thread Straight 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Tapered, One End Tapped/One End Stepped and Tapped/One End Threaded
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]Linear shaft (linear shaft, hardened shaft, guide shaft, slide shaft) One end tapered, one end tapped, one end stepped and tapped, one end threaded type.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid / Solid, One End Stepped Taper Internal thread / External thread 6 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Tapped
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Internal thread Straight 4 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
9 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Threaded, One End Tapped, With Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]Linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are One End Threaded, One End Tapped with Cross-Drilled Hole, with Wrench Flats.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread Internal thread 6 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - Both Ends Threaded
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread External thread 3 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - Both Ends Threaded With Undercut, With Wrench Flats
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid External thread External thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Stepped and Threaded/Both Ends Stepped and Threaded
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped / Solid, Both Ends Stepped External thread Straight / External thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - One End Stepped, One End Threaded
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applicationsSL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly processPost battery assembly processSH-□□Precision cleaningDegassing double packingOil removalDust removalClean environment (Class 10 to 1,000*)Battery assembly processLCD-related post assembly processIn-vehicle camera assembly processSHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removalDust removalOutgas reductionVacuum environmentClean environment (Class 10 to 1,000*)Pre-semiconductor processLiquid crystal deposition processPre-OLED process*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid, One End Stepped Straight / Internal thread External thread 8 ～ 50 h5 ～ g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - With Hex Socket
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]Direct drive shafts (linear shafts, guide shafts, slide shafts) with hex sockets.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Internal thread / External thread Hex socket 6 ～ 20 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - Tapped With 2-Hole
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]Direct motion shafts (linear shafts, guide shafts, slide shafts) are One End Two Tapped Holes.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Straight / Internal thread / External thread Internal thread hole 15 ～ 50 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / LTBC Plating -
Fecha de envío normal:
7 días laborables
Configurar
MISUMI
[Clean & Pack]Shaft - Tapped Pilot
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□ ·Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.[Features]Direct drive shafts (linear shafts, guide shafts, slide shafts) are tapped pilot type.
Más información
CAD:
2D
/3D
Basic Shape Shaft end Shape (Left) Shaft end Shape (Right) [D] Diameter (Shaft) (mm) ISO Tolerance Material Heat Treatment Surface Treatment Mounting Type
Solid Internal thread / External thread Positioning Hole and internal thread 12 ～ 50 g6 Stainless Steel (martensitic) Induction Hardened No Treatment / Hard Chrome Plating / LTBC Plating -
Fecha de envío normal:
10 días laborables
Configurar