Linear Shafts（Heat Treatment：Induction Hardened）
Filter products by: Basic Shape
-
Solid -
Solid, One End Stepped -
Solid, Both Ends Stepped -
Hollow -
Hollow, One End Stepped -
Hollow, Both Ends Stepped
?* Information on days to ship and prices
-
- Recommendation
Linear shafts / straight / machining selectable / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / double-sided internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / straight / machining selectable
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： Same day -
Configure now
Min. Shipping Days ： 4 Days -
Linear shafts / one-sided internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides, internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Configure now
Min. Shipping Days ： 7 Days -
Linear shafts / double-sided annular groove
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread / undercut / flat / radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / straight / S-X
OZAK
[Features] It is a straight standard linear shaft with overall length. [Material] It is JIS-SUJ (rolling bearing steel)2.Configure nowMin. Shipping Days ： 10 Days -
Linear shafts / two-sided internal thread / spanner flat, radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / double-sided external thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / undercut
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / hollow / double-sided internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / one-sided keyway / external thread / internal thread / two-sided keyway
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / one-sided internal thread / spanner flat, radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / conical
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / double-sided female thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / stepped on one side / two-sided internal thread / stepped on one side / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / straight / SF
THK
[Features]
· THK is a high quality, dedicated LM-shaped linear bushing.
· LM shafts are available with quick delivery.
· Manufactured with shaft diameter tolerance g5, h5 precision grade LM shafts semi-standard.
· LM shafts made from corrosion-resistant martensitic stainless steel are also in production.Configure nowMin. Shipping Days ： 19 Days -
Linear shafts / steel / surface hardened, nickel plated / end forms selectable
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 9 Days -
Linear shafts / stepped on one side / external thread / internal thread / conical / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 20 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Configure now
Min. Shipping Days ： 9 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / one-sided external thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / external thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / spanner flat / radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / one-sided, two-sided internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / external thread / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / internal thread on one side / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / annular groove on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / stepped on both sides / external thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 9 Days -
Linear shafts / keyway on one side
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / offset on one side / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread / spanner flat / radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / hollow / stepped on two sides
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / material selectable / treatment selectable / two-sided stepped / external thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / stepped on two sides / external thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / undercut / flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / double end thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / material selectable / treatment selectable / stepped on both sides / external thread / undercut
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| RoHS Information |
| Basic Shape |
| Features, Areas of application |
| Shaft end Shape (Left) |
| Shaft end Shape (Right) |
| Tightening Type |
| Shaft end Perpendicularity |
| [D] Diameter (Shaft)(mm) |
| Material |
| Heat Treatment |
| Surface Treatment |
| ISO Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OZAK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Linear shafts / straight / machining selectable / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / two-sided internal thread / spanner flat, radial bore | Linear shafts / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on one side / external thread / undercut | Linear shafts / hollow / double-sided internal thread / spanner flat | Linear shafts / one-sided keyway / external thread / internal thread / two-sided keyway | Linear shafts / one-sided internal thread / spanner flat, radial bore | Linear shafts / stepped on one side / external thread / internal thread / conical | Linear shafts / steel / surface hardened, nickel plated / end forms selectable | Linear shafts / stepped on both sides / external thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on both sides / internal thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on both sides / external thread / internal thread | Linear shafts / annular groove on both sides / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / material selectable / treatment selectable / two-sided stepped / external thread | Linear shafts / stepped on one side / external thread / stepped on two sides / external thread | Linear shafts / stepped on one side / external thread / internal thread / double end thread | Linear shafts / stepped on one side / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213 | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | - | - | - Volume Discount | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days | 4 Days | 4 Days | Same day | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 10 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 19 Days | 9 Days | 4 Days | 9 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 9 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | RoHS requirements fulfilled | - | - | - | RoHS requirements fulfilled | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Basic Shape | Solid | Solid | Solid | Solid / Solid, One End Stepped / Solid, Both Ends Stepped | Solid | Solid, Both Ends Stepped | Hollow | Solid | Solid | Solid | Solid | Solid | Solid | Solid / Solid, One End Stepped | Hollow | Solid | Solid | Solid / Solid, One End Stepped | Solid | Solid, One End Stepped | Solid / Hollow | Solid | Solid / Solid, One End Stepped | Hollow / Hollow, One End Stepped / Hollow, Both Ends Stepped | Solid | Solid | Solid, Both Ends Stepped | Solid | Solid, Both Ends Stepped | Solid | Solid, One End Stepped | Solid | Solid | Solid, One End Stepped / Solid, Both Ends Stepped | Solid | Solid, One End Stepped | Solid | Hollow, Both Ends Stepped | Solid | Solid, One End Stepped / Solid, Both Ends Stepped | Solid, One End Stepped | Solid | Solid | Solid | Solid, One End Stepped |
| Features, Areas of application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Not applicable | - | - | - | Not applicable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft end Shape (Left) | Straight | Internal thread | Straight | Straight / Internal thread / External thread / Retaining ring grooves / Hex socket / Taper | Internal thread | Straight / Internal thread | Straight | Retaining ring grooves | External thread | - | Internal thread | External thread | Internal thread | External thread | Internal thread | Straight / Internal thread / External thread / Set screw groove | Internal thread | Taper | Internal thread | Straight / Internal thread | Straight | Straight / Internal thread / External thread | Internal thread / External thread | Straight / Internal thread / External thread / Retaining ring grooves | External thread | External thread | External thread | External thread | Straight / Internal thread | Internal thread | Straight / Internal thread | Internal thread | Retaining ring grooves | External thread | Keyway | Straight / Internal thread | External thread | Straight | External thread | External thread | External thread | Straight / Internal thread / External thread | External thread | External thread | Internal thread |
| Shaft end Shape (Right) | Straight | Internal thread | Straight | Straight / Internal thread / External thread / Retaining ring grooves / Hex socket / Taper | Straight | Straight / Internal thread | Straight | Retaining ring grooves | Internal thread | - | Internal thread | External thread | Internal thread | Straight | Internal thread | Set screw groove | Straight | Internal thread / External thread | Internal thread | Internal thread | Straight | Straight / Internal thread / External thread / Taper | Taper | Straight / Internal thread / External thread / Retaining ring grooves | Internal thread | Straight | External thread | Straight | Straight / Internal thread | Straight / Internal thread | External thread | Straight | Retaining ring grooves | Straight / Internal thread / External thread | Straight | Straight | Internal thread | Straight | External thread | Straight / External thread | Straight | Internal thread | External thread | Straight | Straight |
| Tightening Type | No machining | - | - | - | - | - | - | - | - | - | - | - | No machining | - | - | - | - | - | - | - | - | - | No machining | - | - | - | No machining | - | No machining | - | - | - | No machining | - | - | - | - | - | - | - | Wrench flats / Cross-drilled hole | - | - | - | Wrench flats |
| Shaft end Perpendicularity | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.03 | 0.2 | - | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.03 | - | 0.03 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |
| [D] Diameter (Shaft)(mm) | 6 ～ 30 | 4 ～ 50 | 3 ～ 50 | - | 4 ～ 50 | 8 ～ 50 | 6 ～ 50 | 3 ～ 30 | 8 ～ 50 | 3 ～ 40 | 6 ～ 50 | 3 ～ 30 | 6 ～ 30 | 8 ～ 50 | 6 ～ 50 | 6 ～ 30 | 6 ～ 50 | 6 ～ 50 | 4 ～ 30 | 8 ～ 50 | 3 ～ 50 | 8 ～ 50 | 6 ～ 20 | - | 4 ～ 50 | 3 ～ 30 | 6 ～ 30 | 6 ～ 50 | 8 ～ 30 | 6 ～ 20 | 8 ～ 50 | 4 ～ 30 | 6 ～ 30 | 4 ～ 30 | 6 ～ 50 | 8 ～ 50 | 6 ～ 50 | 6 ～ 50 | 4 ～ 50 | 8 ～ 50 | 8 ～ 30 | 15 ～ 50 | 8 ～ 50 | 4 ～ 50 | 8 ～ 30 |
| Material | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (martensitique) | Alloyed Steel | Unalloyed Steel | Alloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel |
| Heat Treatment | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened |
| Surface Treatment | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment | Electroless Nickel Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating |
| ISO Tolerance | h6 ～ h7 | h5 ～ g6 | h5 ～ g6 | h5 ～ g6 | h5 ～ g6 | h5 ～ g6 | g6 | h5 ～ g6 | h5 ～ g6 | g6 | h5 ～ g6 | h5 ～ g6 | h6 ～ h7 | h5 ～ g6 | g6 | g6 | h5 ～ g6 | h5 ～ g6 | g6 | h5 ～ g6 | g6 ～ h7 | g6 | h6 ～ h7 | g6 | h5 ～ g6 | h5 ～ g6 | h6 ～ h7 | h5 ～ g6 | h6 ～ h7 | g6 | h5 ～ g6 | g6 | h6 ～ h7 | g6 | h5 ～ g6 | h5 ～ g6 | h5 ～ g6 | g6 | h5 ～ g6 | h5 ～ g6 | h6 ～ h7 | g6 | h5 ～ g6 | h5 ～ g6 | h6 ～ h7 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
RoHS Information
-
Features, Areas of application
-
Shaft end Shape (Left)
-
Straight -
Internal thread -
External thread -
Set screw groove -
Retaining ring grooves -
Keyway -
Hex socket -
Taper
-
-
Shaft end Shape (Right)
-
Straight -
Internal thread -
External thread -
Set screw groove -
Retaining ring grooves -
Hex socket -
Taper -
Positioning Hole and internal thread
-
-
Tightening Type
- No machining
- Wrench flats
- Cross-drilled hole
-
Shaft end Perpendicularity
- 0.2
- 0.03
-
[D] Diameter (Shaft)(mm)
-
Material
- Unalloyed Steel
- Stainless Steel (austenitic)
- Alloyed Steel
- Stainless Steel (martensitique)
-
Heat Treatment
- No Treatment
- Induction Hardened
-
Surface Treatment
- No Treatment
- Hard Chrome Plating
- LTBC Plating
- Electroless Nickel Plating
-
ISO Tolerance
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
Examples how you can use these components
Categories related to Linear Shafts
-
- Linear Shafts
- Shaft Supports / Shaft Holders
- Set Collars / Clamping Rings
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
- Ball Guides
- Spline Shaft
- Plain Bearing (Bushings, Washers, Semifinished Products)
- Plain Bearing (Plates, Guide Rails, Semifinished Products)
- Linear Guides
- Cable Carriers
- Ball Screws
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
- Other Linear Motion Related Components
- Bellows
-
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.