Linear Shafts（ISO Tolerance：h6）
Filter products by: Basic Shape
-
Solid -
Solid, One End Stepped -
Solid, Both Ends Stepped -
Hollow -
Hollow, One End Stepped -
Hollow, Both Ends Stepped
?* Information on days to ship and prices
-
- Recommendation
Linear shafts / straight / machining selectable / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / conical / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 20 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / undercut / flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / external thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / annular groove on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / internal thread on one side / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / undercut / flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / internal thread on both sides / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / internal thread on one side / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / hexagon socket with centring hole / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 20 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / set screw groove on one side / set screw groove on both sides / external thread / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread on one side / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / undercut / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / groove on one side / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / external thread / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / internal thread with centring hole / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 12 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / external thread on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / internal thread on one side / internal thread on both sides / h6 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 20 mm / [ISO-Tolerance] h6.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / external thread / undercut / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / stepped on both sides / external thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / external thread on one side / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / external thread / undercut / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / external thread / wrench flat / Radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / double stepped on one side / external thread / internal thread / undercut / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / undercut / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread on both sides / wrench flat / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7.
Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| RoHS Information |
| Basic Shape |
| Features, Areas of application |
| Shaft end Shape (Left) |
| Shaft end Shape (Right) |
| Tightening Type |
| Shaft end Perpendicularity |
| [D] Diameter (Shaft)(mm) |
| Material |
| Heat Treatment |
| Surface Treatment |
| ISO Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Linear shafts / straight / machining selectable / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on both sides / external thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on both sides / internal thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / annular groove on both sides / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on one side / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / internal thread on one side / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / internal thread on one side / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on one side / external thread / undercut / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on both sides / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / groove on one side / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on one side / external thread / internal thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / external thread on both sides / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / internal thread on one side / internal thread on both sides / h6 / Cf53 / EN 1.1213 | Linear shafts / stepped on one side / external thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on one side / internal thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / external thread on one side / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on both sides / external thread / undercut / h6, h7 / Cf53 / EN 1.1213 | |||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Basic Shape | Solid | Solid | Solid / Solid, One End Stepped | Solid, One End Stepped | Solid, Both Ends Stepped | Solid, Both Ends Stepped | Solid | Solid, One End Stepped | Solid, One End Stepped | Solid | Solid, One End Stepped | Solid | Solid | Solid / Solid, One End Stepped | Solid | Solid, One End Stepped | Solid, One End Stepped | Solid, One End Stepped | Solid, Both Ends Stepped | Solid | Solid, One End Stepped | Solid, Both Ends Stepped | Solid, One End Stepped | Solid | Solid | Solid, One End Stepped | Solid, Both Ends Stepped | Solid, One End Stepped | Solid, One End Stepped / Solid, Both Ends Stepped | Solid | Solid, Both Ends Stepped | Solid, Both Ends Stepped | Solid, One End Stepped | Solid, One End Stepped | Solid, One End Stepped |
| Features, Areas of application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft end Shape (Left) | Straight | Internal thread | Internal thread / External thread | External thread | External thread | Straight / Internal thread | Retaining ring grooves | External thread | Internal thread | Internal thread | External thread | Internal thread | Internal thread | Internal thread / External thread | Straight / Internal thread / Set screw groove | External thread | Straight / Internal thread | External thread | Internal thread | Keyway | External thread | Straight / Internal thread | Internal thread / External thread | External thread | Internal thread | External thread | External thread | Straight / Internal thread | External thread | External thread | External thread | External thread | External thread | External thread | Internal thread |
| Shaft end Shape (Right) | Straight | Internal thread | Taper | Straight | External thread | Straight / Internal thread | Retaining ring grooves | Internal thread | Straight | Straight | Internal thread | Internal thread | Straight | Hex socket | Set screw groove | Straight | Internal thread | Straight | Internal thread | Straight | Internal thread | External thread | Positioning Hole and internal thread | External thread | Straight / Internal thread | Straight | External thread | Straight | Straight / External thread | Straight | External thread | External thread | Internal thread | Internal thread | Internal thread |
| Tightening Type | No machining | No machining | No machining | Wrench flats / Cross-drilled hole | No machining | No machining | No machining | Wrench flats / Cross-drilled hole | Wrench flats | Wrench flats / Cross-drilled hole | Wrench flats / Cross-drilled hole | Wrench flats / Cross-drilled hole | No machining | No machining | No machining | Wrench flats / Cross-drilled hole | No machining | No machining | Wrench flats | No machining | No machining | No machining | No machining | No machining | No machining | No machining | Wrench flats | No machining | No machining | No machining | No machining | Wrench flats | No machining | No machining | Wrench flats |
| Shaft end Perpendicularity | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |
| [D] Diameter (Shaft)(mm) | 6 ～ 30 | 6 ～ 30 | 6 ～ 20 | 8 ～ 30 | 6 ～ 30 | 8 ～ 30 | 6 ～ 30 | 6 ～ 30 | 8 ～ 30 | 6 ～ 30 | 8 ～ 30 | 6 ～ 30 | 6 ～ 30 | 6 ～ 20 | 6 ～ 30 | 6 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 6 ～ 30 | 6 ～ 30 | 8 ～ 30 | 12 ～ 30 | 6 ～ 30 | 6 ～ 20 | 6 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 6 ～ 30 | 8 ～ 30 | 6 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 |
| Material | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel |
| Heat Treatment | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened |
| Surface Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment | No Treatment |
| ISO Tolerance | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 | h6 |
Loading...
Filter by:
-
RoHS Information
-
Features, Areas of application
-
Shaft end Shape (Left)
-
Straight -
Internal thread -
External thread -
Set screw groove -
Retaining ring grooves -
Keyway -
Hex socket -
Taper
-
-
Shaft end Shape (Right)
-
Straight -
Internal thread -
External thread -
Set screw groove -
Retaining ring grooves -
Hex socket -
Taper -
Positioning Hole and internal thread
-
-
Tightening Type
- No machining
- Wrench flats
- Cross-drilled hole
-
Shaft end Perpendicularity
- 0.2
- 0.03
-
[D] Diameter (Shaft)(mm)
-
Material
- Unalloyed Steel
- Stainless Steel (austenitic)
- Alloyed Steel
- Stainless Steel (martensitique)
-
Heat Treatment
- No Treatment
- Induction Hardened
-
Surface Treatment
- No Treatment
- Hard Chrome Plating
- LTBC Plating
- Electroless Nickel Plating
-
ISO Tolerance
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
Examples how you can use these components
Categories related to Linear Shafts
-
- Linear Shafts
- Shaft Supports / Shaft Holders
- Set Collars / Clamping Rings
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
- Ball Guides
- Spline Shaft
- Plain Bearing (Bushings, Washers, Semifinished Products)
- Plain Bearing (Plates, Guide Rails, Semifinished Products)
- Linear Guides
- Cable Carriers
- Ball Screws
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
- Other Linear Motion Related Components
- Bellows
-
Método de pago
Factura
Prepago
Fabricación bajo demanda
Certificados
Copyright © MISUMI Corporation All Rights Reserved.